LENNOX CORE Service App Test and Balance/ Damper Setup Instructions
COMMERCIAL TRAINING TOOLBOX TIPS
Lennox CORE Service App Test and Balance/Damper Setup
Applies to Lennox Model L and Enlight Rooftop Units 3-25 tons
Helpful Resources
- Download installation and service literature from LennoxCommercial.com or LennoxPros.com.
- CORE Service App Reference Guide takes you step-by-step through the startup and commissioning procedures.
- Log in to LennoxPros.com to start the online CORE Service Curriculum.
- View Lennox Model L and CORE Control System videos on YouTube.
Required Tools
The startup technician will use the CORE Service App to setup the unit for operation. Configure Damper Positions using the Test and Balance menu.
Pair your device to the Lennox CORE Control System to perform the damper setup steps.
See the excerpt from the CORE Service App Reference Guide below. Complete instructions are included in the guide.
Register for Technical Training Webinars
Self-Service Technical Support with No Wait Times
Click on the black logos below to download these apps.
Documents / Resources
![]() |
LENNOX CORE Service App Test and Balance/ Damper Setup [pdf] Instructions Model L and Enlight Rooftop Units 3-25 tons, CORE Service App Test and Balance Damper Setup, CORE Service App, App, CORE App, Service App, Test and Balance, Damper Setup |