LENNOX CORE Service App BACnet IP Setup
Lennox CORE Service App BACnet IP Setup
Applies to Lennox Model L and Enlight Rooftop Units 3-25 tons
Helpful Resources
- Installation and service literature on LennoxCommercial.com or LennoxPros.com.
- CORE Service App Reference Guide.
- CORE Service Curriculum on LennoxPros.com.
- Lennox Model L and CORE Control System videos.
Requirements
- iOS or Android device – phone or tablet with Android 6.0 (Marshmallow) or iOS version 11 minimum. Android hardware requires 2GB RAM and a 2GHz Core processor.
- CORE Service App found at the appropriate App Store or at the following QRs:
Androld |
Ios |
![]() |
![]() |
BACnet IP mode is used anytime the unit is controlled by a building automation system using the BACnet IP protocol. Required information includes device instance and type of control. The technician will setup sensor types, default blower operation, sensor backup mode, and backup setpoints.
The technician will use the Network Integration wizard to set up the controller for BACnet IP.
Excerpt below from CORE Service App Reference Guide . Further instructions are included in the guide.
Customer Suppoert
Click on the black logos below to download these apps
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Download all Training Toolbox Tips
Register for Technical Training Webinars
Documents / Resources
![]() |
LENNOX CORE Service App BACnet IP Setup [pdf] Instructions Model L, Enlight Rooftop Units 3-25 tons, CORE Service App BACnet IP Setup, CORE Service App, BACnet IP Setup |