Lemokey X3 Mechanical Keyboard
IN THE BOX
- Lemokey X3 Mechanical Keyboard x 1
- Type-C Cable × 1
- Keycap-Switch Puller × 1
- Extra Keycaps Set x 1
- Manual x 1
Quick Start Guide
- The keyboard’s default layout is configured for Windows. To use it with MacOS, please remap it using VIA.
Windows
- The VIA Key Remapping Software
- Please visit us via.app to use the online
- VIA software to remap the keys.
- If the VIA cannot recognize your keyboard,
- please reach our support to get the instruction.
- The online VIA software can only run on the latest version of Chrome, Edge, and Opera browsers.
- VIA only works when the keyboard is connected by wire to the computer.
The Backlight
- Press FN + Q to change the lighting effect
- Press FN + TAB to turn the backlight on/off
Adjust The Backlight Brightness
- Press FN + W to increase the backlight brightness
- Press FN + S to decrease the backlight brightness
The Key Rollover
Press FN + N to switch between 6-key rollover and N-key rollover
- 6-key rollover: the keyboard can detect up to 6 simultaneous key inputs.
- N-key rollover: The keyboard can detect all key inputs without limiting the number of key presses.
- The keyboard enables N-key rollover by default.
Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
- Download the right firmware and QMK Toolbox from our website.
- Unplug the power cable and remove the space bar keycap to find the reset button on the PCB.
- Hold the reset key first, then plug in the power cable. Release the reset key, and the keyboard will now enter DFU mode.
- Flash the firmware with the QMK Toolbox.
- Factory reset the keyboard by pressing FN + J + Z (for 4 seconds).
Step by step guide can be found on our website.
SPECIFICATIONS
X3 MECHANICAL KEYBOARD SPECIFICATIONS
- Layout: Full Sized
- Switch type: Mechanical
- Width: 137.8 mm
- Length: 445.7 mm
- Front height: 20.6 mm (without keycaps) 31.8 mm (with keycaps installed)
- Back height: 30 mm (without keycaps) 41.8 mm (with keycaps installed)
- Keyboard feet height: 1.3 mm
- Angle: 4 / 6 / 8.7 degree
OVERVIEW
X3 MECHANICAL KEYBOARD OVERVIEW
- Caps Lock Indicator
- Windows Lock Indicator
- Num Lock Indicator
- Scroll Lock Indicator
- Type-C Port
DEFAULT KEY LAYOUT
- LAYER 0: This is the default layer.
- LWin=Left Windows LAIt=Left Alt RAIt=Right Alt RApp=Right App RCtl=Right CtrI
- LAYER 1: This layer will be activated when you press the FN/MO(1) key.
- LAYER 2/LAYER 3: This is a blank layer.
KEY DESCRIPTION
Third-party input tools are not compatible with the keyboard
- Due to compatibility, versions, brands, and drivers of Windows/Android OS, functions of third-party input tools may be affected while using the keyboard.
- Please make sure your operating system and drivers are up to date.
Certain multimedia keys or function keys do not work
Functions of certain multimedia keys may be disabled due to compatibility, versions, brands, and drivers of devices.
- Multimedia keys:
- Function keys:
Safety Precaution
- Keep the product, accessories, and packaging parts out of the reach of children to prevent any accidents and choking hazards.
- Always keep the product dry to avoid corrosion.
- Do not expose the product to extreme temperatures below -10°C (5°F) or above 50°C (131°F) to preserve the lifespan of the keyboard and battery.
Find us at
- https://www.lemokey.com
- Support@lemokey.com
@lemokey
@emokey.keyboard
@lemokey_com- Designed by Lemokey
- Made in China
Documents / Resources
 |
Lemokey X3 Mechanical Keyboard [pdf] User Manual X3 Mechanical Keyboard, X3, Mechanical Keyboard, Keyboard |