Lemokey M55 Mechanical Keyboard and Mouse Set
Lemokey
X2 Mechanical Keyboard and Mouse Set
IN THE BOX
- Lemokey X2
- Mechanical Keyboard x 1
- MSS Mousex 1
- Type-C Cable x 1
- Keycap-Switch Puller x1
- Extra Keycaps Set x 1
- Manual x 1
Keyboard Quick Start Guide
- The keyboard’s default layout is configured for Windows. To use it with MacOS, please remap it using VIA.
The VIA Key Remapping Software
Please visit usevia.app to use the online
VIA software to remap the keys.
If the VIA cannot recognize your keyboard, please reach our support to get the instruction. 
- The online VIA software can only run on the latest version of Chrome, Edge, and Opera browsers yet.
- VIA only works when the keyboard is connected by wire to the computer.
The Backlight
Adjust The Backlight Brightness
The Key Rollover
- 6-key rollover: the keyboard can detect up to 6 simultaneous key inputs.
- N-key rollover: the keyboard can detect all key inputs without limit to the number of key presses.
- The keyboard enables N-key rollover by default.
Factory Reset
Troubleshooting? Don1t know what’s going on with the keyboard?
- Download the right firmware and QMK Toolbox from our website.
- Unplug the power cable and remove the space bar keycap to find the reset button on the PCB.
- Hold the reset key first, then plug in the power cable. Release the reset key, and the keyboard will now enter DFU mode.
- Flash the firmware with the QMK Toolbox.
- Factory reset the keyboard by pressing FN + J + Z (for 4 seconds).
The step-by-step guide can be found on our website.
X2 MECHANICAL KEYBOARD SPECIFICATIONS
Specifications
- Layout Full Sized
- Switch type Mechanical
- Width 128.6 mm
- Length 437.7mm
- Front height
- 16.5 mm (without keycaps)
- 33.2 mm (with keycaps installed)
- 20 mm (without keycaps)
- Back height 37.4 mm (with keycaps installed)
- Keyboard feet height 1.3mm
- Angle 2 / 7 degree
X2 MECHANICAL KEYBOARD OVERVIEW
- Caps Lock Indicator
- Windows Lock Indicator
- Num Lock Indicator
- Scroll Lock Indicator
- T ype-C Port
DEFAULT KEY LAYOUT:
LAYER 0: This is the default layer.
LWin= Left Windows LAlt= Left Alt RAlt= Right Alt RApp= Right App RCtl= Right Ctrl
LAYER 1: This layer will be activated when you press the FN/MO(l) key.
LAYER 2/LAYER 3: This is a blank layer.
KEY DESCRIPTION
| Key Description | |
| Ser- | Screen Brightness Decrease |
| Ser+ | Screen Brightness Increase |
| BL- | Backlight Decrease |
| BL+ | Backlight Increase |
| Prvs | Previous |
| Play | Play/Pause |
| Next | Next |
| Mute | Mute |
| Vol- | Volume Decrease |
| Vol+ | Volume Increase |
| NKRO | N-key rollover |
| Key Description | |
| BL Toggle | Turn Backlight on/off |
| BL Cycle | Backlight Cycle |
| M0(1) | Layer 1 will be activated when holding this key |
| M0(2) | Layer 2 will be activated when holding this key |
| M0(3) | Layer 3 will be activated when holding this key |
| M0(4) | layer 4 will be activated when holding this key |
Third-party input tools are not compatible with the keyboard.
Due to compatibility, versions, brands and drivers of Windows/Android OS, functions of third-party input tools may be affected while using the keyboard. Please make sure your operating system and drivers are up to date.
Certain multimedia keys or function keys do not work.
Functions of certain multimedia keys may be disabled due to compatibility, versions, brands, and drivers of devices.
*Multimedia keys: 
Function keys: 
Safety Precaution
- Keep the product, accessories and packaging parts out of the reach of children to prevent any accidents and choking hazards.
- Always keep the product dry to avoid corrosion.
- Do not expose the product to extreme temperatures below -10°C (S° F) or above 50°C (131 ° F) to preserve the lifespan of the keyboard and battery.
Mouse Quick User Guide
- Left button
- Right button
- Middle wheel button
- DPI+ button
- DPI- button
- Forward button
- Backward button
DPI indicator
| First level | 800 DPI |
| Second level | 1600 DPI ( default ) |
| Third level | 2400 DPI |
| Fourth level | 4000 DPI |
Light effects
- Next light effect: Left button + Forward button
- Previous light effect: Left button + Backward button
- ‘The MSS mouse offers a choice of 8 lighting effects.
How to factory reset
Hold down the “DPI + button” , “Left button” and “Forward button” simultaneously for 4 seconds, and all the LED lights on the mouse will blink. It will blink three times to indicate that the factory reset is successful.
Mouse specification
- Weight: 110 ± 5 g
- Size: 116.7 x 64 x 38.6 mm
- Connectivity: Type-A wired
- Report rate (polling rate) : 125 Hz – 250 Hz – 500 Hz – 1000 Hz (default)
‘The default polling rate is 1000 Hz, which can be modified through the driver.
Lemokey
- Find us at: https://www.lemokey.com
- Support@lemokey.com
- @lemokey
- @lemokey.keyboard
- @ lemokey.com
- Designed by Lemokey
- Made in China
Documents / Resources
 |
Lemokey M55 Mechanical Keyboard and Mouse Set [pdf] User Guide M55, M55 Mechanical Keyboard and Mouse Set, Mechanical Keyboard and Mouse Set, Keyboard and Mouse Set, Mouse Set, Set |
