legrand LE11299BD Three-Phase Meter Instruction Manual

4 120 92
4 120 93

The instructions for installation and use must be strictly observed in order to avoid the risk of electric shock or fire.

Contents hide

1 • Wiring diagrams

2 • Input/Output

3 • Positions for lead plating

4 • RS485 wiring diagram

5 EU DECLARATION OF CONFORMITY

6 Documents / Resources

6.1 References

7 Related Posts

• Wiring diagrams

• Input/Output

U	3x230V / 3x400V ± 15%				CAT III
I	I_min= 0,25A I_tr= 0,5A I_ref= 5A I_max= 63A
cl.	4 120 92 4 120 93		B (EN 50470-1,3)
LED	1 Wh/imp.
COM		RS485 Modbus
L1-L2-L3	11 mm MAX 1 x 10 mm² 1 x 10 mm² 1 x 16 mm²			Recommended torque 1,6 to 2Nm COMBI PZ2
1 C _____ _____ RS485 _____	8 mm MAX 1 x 1 mm² 1 x 1 mm² 1 x 1,5 mm²			Recommended torque 0,2Nm 0,5 x 2,5mm
	-25°C ) – (70°C)

• Positions for lead plating

• RS485 wiring diagram

(1)RS485:
Prescribed use of Cable Belden 9842, Belden 3106A (or equivalent) for a maximum length of 1000 m or Category 6 cable (FTP or UTP) for a maximum length of 50 m;

*Resistance not furnished with the article 4 120 92 – 4 120 93

Modbus Address: 5
Baud Rate: 19,2 kbps
Parity

Complete documentation is available at www.e-catalogue.legrandgroup.com Type “4 120 92 – 4 120 93” in the search field.”

EU DECLARATION OF CONFORMITY

n° 10 0066 02

We
LEGRAND FRANCE
128, Avenue du Marechal de Lattre-de-Tassigny – 87045 LIMOGES CEDEX – FRANCE

declare under our sole responsability that the product:

trade mark :
LEGRAND
4 120 92 4 120 93

designation :
3-phase meter 4M 63A direct – MID

manufactured by :
LEGRAND
BP 30076
87002 LIMOGES CEDEX FRANCE

is in conformity with the relevant Union harmonisation legislation :

2014/35/EU of 26-02-2014 (Low Voltage)

and 2014/30/EU of 26/02/2014 (Electromagnetic Compatibility)

and 2014/32/UE du 26-02-2014 (Mesuring Instrument) and 2011/65/EU of 08/06/2011 modified by 2015/863 of 31/03/2015 (ROHS 2)

on condition that it is used in the manner intended and/or in accordance with the current installation standards and/or with the manufacturer’s recommendations.

These provisions are ensured by conformity to the following standards :

EN 50470-1:2006; EN 50470-3:2006;

The product match the product described in the EU type examination certificate N° 0120/SGSO447 issued by the Notified Body 0598

This declaration state that the fulfilment of the essential requirements set out in the annexe I and in the relevant instrument specific annexes has been demonstrated

Marcello RE