Green’up Surface Mounting Socket
Instruction Manual
Green’up Surface Mounting Socket
Green’up™ Access ready to install kit for electric vehicle charging for electric vehicle charging
Green’up ™ Access sockets 16 A – 230 V – 16 A EV – for electric vehicles
The Green’up system is based on an innovative Legrand technology, activating “maximum power” mode and ensuring a secure and fast charging process.
Installation principle p. 376
Dimensions p. 376
| Pack | Cat.Nos | Ready to install kit – 16 A EV |
| 1 | 0 904 70 | Allows creating a safe infrastructure for electric and hybrid vehicle charging, using Mode 2 (or Mode 1) charging cables. Suitable for residential and workplace use Power supply directly from the electrical panel: 1 dedicated line 3 x 2.5 mm2 cable, protected with one RCBO (one line per socket) The kit contains: – 1 heavy duty German standard Green’up Access plastic socket, with flap cover, IP 55 – IK 08 – 16 A – 230 V – 16 A EV, 6 mm2 screw terminals, according to IEC 60884-1, NF C 61-314, VDE 620-1 – 1 base for hanging up the vehicle charging cable control box – 1 RCBO 16 A, C curve, 30 mA, F type Cat.No 4 107 53 The use of a surge protective device is recommended Recommended installation height: between 0.80 and 1.20 m from the floor |
Installation principle p. 376
Dimensions p. 376
Used for safely charging rechargeable electric and hybrid vehicles which take Mode 2 cord (compatible with Mode 1) Connected to the consumer panel via one 3 x 2.5 mm2
dedicated line (1 line per socket) protected by 30 mA – 20 A C curve, type A or HPi RCBO (or 30 mA type A or HPi RCCB + 20 A C curve circuit breaker) Recommended installation height: 1.30 m from the floor Suitable for residential and workplace use
| Pack | Cat.Nos | Mode 1 and Mode 2 sockets – 16 A EV |
| 1 | 0 904 72 | Heavy-duty mechanisms with silvered contacts Single-phase sockets – screw connection – 230 V Supplied with base Cat.No 0 904 78 for hanging up the vehicle charging cable control box For charging 1 vehicle Conform to IEC 60-884-1 IP 55 – IK 08 surface-mounting Suitable for installation in private houses Plastic socket with flap cover Supplied complete with surface mounting box fitted with an ISO 20 cable gland Dimensions (H x W x D): 98 x 98 x 70 mm (exc. cable gland)  German standard socket outlet |
| 1 | 0 778 56 | IP 55 – IK 10 flush-mounting – metal socket Suitable for installation in private houses, lock-up garages, parking lots, etc Supplied complete with plate and support Mounting in 1-gang Batibox flush-mounting box depth 50 mm Can be surface mounted with box Cat.No 0 778 90 Dimensions (H x W x D): 110 x 110 x 13.5 mm  German standard socket outlet |
| 1 | 0 778 57 | IP 55 – IK 10 flush-mounting – metal socket with locked flap cover Suitable for installation in private houses, lock-up garages, parking lots, etc Supplied complete with plate and support Mounting in 1-gang Batibox flush-mounting box depth 50 mm Can be surface mounted with box Cat.No 0 778 90 Dimensions (H x W x D): 110 x 110 x 13.5 mm Supplied complete with a unique set of 2 keys in order to restrict access to the socket  German standard socket outlet |
Documents / Resources
 |
legrand Green'up Surface Mounting Socket [pdf] Instruction Manual Green up Surface Mounting Socket, Surface Mounting Socket, Mounting Socket, Socket |
