legrand 8 636 53 Connected Switch With Dimmer Option Instructions

Default Mode (On/Off):
In default mode, the switch is compatible with LED bulbs rated between 5W and 125W at 240V~ or 110V~. A maximum of 10 bulbs can be connected, and it is recommended to use bulbs of the same type and manufacturer for optimal performance.

Dimmer Option Mode:
In dimmer mode, the switch only works with dimmable bulbs. Make sure the bulbs are identified as dimmable by the logo on their packaging. The bleeder ref 040149 must be used to avoid flash ghost effects when the load is OFF.

Installation Instructions:

Switch off the power at the main circuit breaker before starting.

Uninstall the old switch and wire the connected switch as per the provided guidelines.
Install the bleeder as close to the load as possible and include a bulb before restoring power.

Ensure to use dimmable LEDs when activating dimmer mode.

Existing Wiring Replacements:
For replacing existing switches with the connected switch, follow the wiring diagrams provided in the manual for different setups like two-way switches or mechanical push-button configurations.

FAQ:

Q: What type of bulbs are compatible with the connected switch?
A: In default mode, LED bulbs rated between 5W and 125W are recommended. In dimmer mode, only dimmable bulbs should be used.

Q: How do I prevent flash ghost effects when the load is OFF?
A: Use the provided bleeder ref 040149, which needs to be installed systematically to avoid flash ghost effects.

This pack is a connected accessory that requires you to buy and install the Niloé Step with Netatmo connected starter pack first.

Pack contents

Connected switch

(with dimmer option) + bleeder
Frequency bands: 2.4 – 2.4835 GHz

Power level: < 100 mW

Characteristics

In default mode (on/off), this switch works with the following types of bulbs:

(*) or 10 bulbs max. For comfortable lighting, we recommend using bulbs of the same type and manufacturer.
Product NOT COMPATIBLE with ferromagnetic transformer
Risk of the product breaking

In the dimmer option operating mode (which can be activated via the App), this switch functions only with dimmable bulbs (identifiable by the logo on the packaging).

The bleeder ref 040149 has to be used systematically to:
-avoid flash ghost effects when the load is OFF.

Before starting wiring precautions

If you plan to install two-way light switches or switched power outlets, read the following precautions:
To control a light with two or more switches, only use the following products:

Connected switch without neutral (with dimmer option) + bleeder
Wireless light switches for all other controls (not included in this pack)

Do not use: two connected switches (with a dimmer option) to control the same lighting point.

Mandatory safety precautions

OFF
OFF Switch off the power at the main circuit breaker

Make sure that the power is off before continuing with the installation.

Install the connected switch (with dimmer option)

The connected switch (with a dimmer option) works with standard bulbs or dimmable bulbs including LEDs over 5 W. Using dimmable LEDs is mandatory when dimmer mode is activated.

Existing wiring

Replacement of an existing 2-way switch by a connected switch + wireless light switch
Previous switch replaced by the wireless light switch

Wireless switch + wired connected switch

Use a connector to connect all 3 wires (travelers 1 and 2 and lamp return wire). Use a dedicated connector to insulate the neutral wire (if present)

Replacement of a 2-way switch by a connected switch + mechanical push-button. The previous switch was replaced by the mechanical push button

Mechanical push button + connected wired switch

To add a connected product to your connected installation, you should follow the instructions:

in the Legrand Home + Control application (Settings/Add a new product section)
or consult the user manual on legrand.com.

LEGRAND

Pro and Consumer Service – BP 30076 87002 LIMOGES CEDEX FRANCE
www.legrand.com.

Safety instructions

This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to the risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product’s specific mounting location. Do not open up, dismantle, alter, or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorized opening or repair completely cancels all liabilities and the rights to replacement and guarantees. Use only Legrand brand accessories.

DECLARATION OF CONFORMITY

SIMPLIFIED EU DECLARATION OF CONFORMITY

The undersigned,
Legrand

declares that the radio-electric equipment referred to in these instructions complies with directive 2014/53/EU. The full text of the EU Declaration of Conformity is available on the following website: www.legrand.com/ecatalogue.

Documents / Resources

legrand 8 636 53 Connected Switch With Dimmer Option [pdf] Instructions
8 636 53, 8 637 53, 8 638 53, 8 639 53, 8 636 53 Connected Switch With Dimmer Option, 8 636 53, Connected Switch With Dimmer Option, Switch With Dimmer Option, Dimmer Option, Option

References

User Manual

legrand 8 636 53 Connected Switch With Dimmer Option

Product Usage Instructions