LEDYi-Lighting-SS-BWB-Bluetooth-and-RF-Smart-AC-Switch-logo

LEDYi Lighting SS-BWB Bluetooth and RF Smart AC Switch
LEDYi-Lighting-SS-BWB-Bluetooth-and-RF-Smart-AC-Switch-pro

Features

  • Bluetooth + RF + AC push smart switch, without dimming function.
  • To switch single color LED lamps, traditional incandescent and halogen lights.
  • Tuya APP cloud control, support on/off, delay turn on/off light and timer run function.
  • Compatibility with RF 2.4G dimming remote control.
  • Each SS-B(WB) controller can also work as Bluetooth-RF converter, then use Tuya APP to control one or more RF switch or controller synchronously.
  • Connect with external push switch optional.
  • Easy to be placed in standard wall junction box behind a push switch.
  • Over-heat / Over-load protection, recover automatically

Technical Parameters

Input and Output
Input voltage AC100-240V
Output voltage AC100-240V
Output current Max 1.5A
Output power 150-360W
Input signal Tuya APP + RF + Push switch
RF Control distance 30m(Barrier-free space)
Environment
Operation temperature Ta: -30 OC ~ +55 OC
Case temperature (Max.) T c: +85OC
IP rating IP20
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3

ETSI EN 301 489-17 V3.2.4

Safety standard(LVD) EN 62368-1:2020+A11:2020
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certification CE,EMC,LVD,RED
Weight
Net weight 0.041kg
Gross weight 0.051kg

Mechanical Structures and InstallationsLEDYi-Lighting-SS-BWB-Bluetooth-and-RF-Smart-AC-Switch-1

System wiringLEDYi-Lighting-SS-BWB-Bluetooth-and-RF-Smart-AC-Switch-2

Note:

  1. The above distance is measured in a spacious(no obstacle) environment, Please refer to the actual test distance before installation.
  2. Users must use the Tuya Bluetooth gateway to realize remote control and voice control.

Wiring diagramLEDYi-Lighting-SS-BWB-Bluetooth-and-RF-Smart-AC-Switch-3

Note:  An additional AC relay or contactor is needed when total input current of the load (such as pump) is higher than 1.5A.LEDYi-Lighting-SS-BWB-Bluetooth-and-RF-Smart-AC-Switch-4

Tuya APP network connection and operationLEDYi-Lighting-SS-BWB-Bluetooth-and-RF-Smart-AC-Switch-5

Press and hold Match/Set key for 5s, or push twice Match/Set key fastly, Clear previous network connection, enter config mode. the blue LED indicator fast flash. If Tuya APP network connection succeed, the blue LED indicator will stop flash, and in Tuya APP, you can find BT-SWITCH device. Tuya APP interface operation: Touch on/off key to turn on or off light.

SS-B(WB) match RF remote control (Optional)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the SS-B(WB)’s Match key

Match:
Short press match key of SS-B(WB), immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote.

Delete:
Press and hold match key of SS-B(WB) for 10s to delete all match, The light blinks 5 times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power of SS-B(WB), then switch on power, repeat again, Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power of SS-B(WB), then switch on power, repeat again, Immediately short press on/off key (single-zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

SS-B(WB) work as Bluetooth-RF converter to match other RF switch or controller

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key of the controller, immediately press on/off key on the Tuya APP. The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key of the controller for 5s, The LED indicator fast flash a few times means match was deleted.

Use Power Restart

Match:
Switch off the power of the controller, then switch on power, repeat again, Immediately short press on/off key 3 times on the Tuya APP. The light blinks 3 times means match is successful.

Delete:
Switch off the power of the controller, then switch on power, repeat again, Immediately short press on/off key 5 times on the Tuya APP. The light blinks 5 times means match was deleted.

Documents / Resources

LEDYi Lighting SS-BWB Bluetooth and RF Smart AC Switch [pdf] Instruction Manual
SS-BWB, Bluetooth and RF Smart AC Switch, SS-BWB Bluetooth and RF Smart AC Switch

References

Leave a comment

Your email address will not be published. Required fields are marked *