Harness Range
User Instructions
FITTING THE HARNESS
Please note that when fitting the harness strap to the Camlock, you must follow the following safety measures:
- Ensure the male buckle is positioned with the center bar flat side up (triangular point facing downwards) and the longest edge of the buckle to the top.
- Thread strap through the rear slot (furthest away from the buckle)
- Push strap down through the front slot (closest to the buckle)
- Thread strap through Camlock and close to secure
- Use the D ring to adjust the position of the strap
The pack should contain the following
(Screws below are scaled 1:1 so can be used as a size reference)
| ags | Used In |
 SJ117 (4OFF) | Leckey Everday Activity Seat |
 SJ26 (4OFF) | Leckey Squiggles Seat Leckey Mygo Seat Leckey KIT |
 SJ24 (2OFF) | Leckey Squiggles Seat Leckey Mygo Seat |
 SJ25 (2OFF) | Leckey Squiggles Seat |
 S104 (4OFF) | Leckey Squiggles Seat Leckey Mygo Seat Leckey KIT Leckey Everday Activity Seat |
LECKEY Kit
| KIT upper |  |
| KIT Lower |  |
LECKEY Mygo Seat
| Mygo Upper |  |
| Mygo Lower |  |
| Mygo shoulder ext |  |
LECKEY Squiggles Seat
| SQSE shoulder ext |  |
| SQSE upper |  |
| SQSE lower |  |
LECKEY Everyday Activity Seat
| EDS 3 upper |  |
| EDS 2 upper |  |
| EDS 2&3 lower |  |
| EDS 1 upper |  |
| EDS 1 lower |  |
Documents / Resources
 | LECKEY Harness Range [pdf] Instruction Manual Harness Range |
