LEAJOY Z1 LITE Multi Platform Wireless Game Controller
LEADJOY Z1 Multi-Platform Wireless Game Controller
Package Contents
- 1 x Z1 Controller
- 1 x USB-C Cable
- 1 x User Manual
Requirements
Compatible with Windows, Switch, Android, and iOS devices.
Device Layout
Illustrations of the controller layout with labeled buttons and ports.
Basic Function Introduction
| Connection Status | Description |
|---|---|
| LED1 | Windows Wired/Bluetooth Mode |
| LED2 | Switch Mode |
| LED3 | Android Mode |
| LED4 | iOS Mode |
Indicator Status
| LED Status | Description |
|---|---|
| Flashing | Connecting |
| Solid | Connected |
Windows Connection Tutorial
Wired Connection
- Connect the controller to the PC using the USB-C cable.
- LED1 will light up to indicate connection.
Bluetooth Connection
- Press and hold the Home button to enter pairing mode.
- Select “Z1” from the Bluetooth device list on your PC.
- LED1 will remain solid when connected.
Switch Connection Tutorial
Bluetooth Connection
- Go to “Controllers” on the Switch menu.
- Select “Change Grip/Order”.
- Press and hold the Home button on the controller.
- LED2 will remain solid when connected.
Android Connection Tutorial
Bluetooth Connection
- Enable Bluetooth on your Android device.
- Press and hold the Home button on the controller.
- Select “Z1” from the Bluetooth device list.
- LED3 will remain solid when connected.
iOS Connection Tutorial
Bluetooth Connection
- Enable Bluetooth on your iOS device.
- Press and hold the Home button on the controller.
- Select “Z1” from the Bluetooth device list.
- LED4 will remain solid when connected.
Advanced Tutorial
Back Button Settings
Instructions on configuring the back buttons for custom functions.
Turbo Settings
Instructions on setting up turbo functions for rapid button presses.
Button Combination
| Function | Button Combination |
|---|---|
| Stick & Trigger Calibration | Press and hold L1 + R1 + Home |
| Gyroscope Calibration | Press and hold L2 + R2 + Home |
Install V600 Software
Instructions on installing the V600 software for additional features.
Controller Reset
Press the reset button on the back of the controller using a pin.
Precautions
- Read all instructions before using the controller.
- Keep the controller dry and avoid exposure to extreme temperatures.
- Do not attempt to disassemble the controller.
Waste Electrical & Electronic Equipment Information
Information on proper disposal and recycling of electronic waste.
Declaration of Conformity
This product complies with the relevant regulations and standards.
Customer Service
Contact information for customer support and service inquiries.
Specifications
| Feature | Details |
|---|---|
| Battery | Rechargeable lithium-ion |
| Connectivity | Bluetooth 5.0, USB-C |
| Compatibility | Windows, Switch, Android, iOS |
FAQ
- How do I connect the controller to a PC?
Use the USB-C cable for a wired connection or Bluetooth for wireless. - What should I do if the controller is not responding?
Try resetting the controller by pressing the reset button with a pin. - Can I use the controller with multiple devices?
Yes, the controller can connect to Windows, Switch, Android, and iOS devices.
MULTI-PLATFORM WIRELESS GAME CONTROLLER
[E-Manuall https://www.leadjoy.top/pages/manuals-leadjoy-z1lite
PACKAGE CONTENTS
- Controller #1
- 1 m Type-C Cable #1
- Thank You & After-sale Service Card *1
- User Manual *1
- Certification*1
- Receiver *1
DEVICE LAYOUT
BASIC FUNCTION INTRODUCTION
CONNECTION STATUS
OTHER DESCRIPTIONS
INDICATOR STATUS
WINDOWS CONNECTION TUTORIAL
WIRED CONNECTION
- Use the included Type-C cable to connect the controller to the computer.
- The connection is successful when the channel indicator stays solid.
BLUETOOTH CONNECTION
- Long press the controller’s
buttons for 2 seconds until the channel indicators 2, 3, and 4 flash, then release the buttons. - Open the computer’s Bluetooth list, find the device named “Xbox Wireless Controller”, and click to connect.
- The connection is successful when the Channel indicator stays solid. * If the connection is unsuccessful, please press and hold the controller’s Home + Capture buttons for 2 seconds to re-enter pairing mode.
RECEIVER CONNECTION
- Plug the receiver into the USB port of the device to be connected; the receiver indicator will flash.
- Long press the controller’s
buttons for 2 seconds until the Channel indicators 2 and 4 flash, then release the buttons and wait for the controller to connect to the receiver. - The connection is successful when the indicators on both the controller and the receiver stay solid.
* If the connection is unsuccessful, please press and hold the controller’s Home + Capture buttons for 2 seconds to re-enter pairing mode.
SWITCH CONNECTION TUTORIAL
BLUETOOTH CONNECTION
- On the Switch main menu, go to Controllers – Change Grip/Order and wait on this screen.
- Long press the controller’s
buttons for 2 seconds until the Channel indicators start cycling up and down, then release the buttons and wait for the connection. - The connection is successful when the Channel indicator stays solid.
* If the connection is unsuccessful, please press and hold the controller’s Home + Capture buttons for 2 seconds to re-enter pairing mode.
ANDROID CONNECTION TUTORIAL
BLUETOOTH CONNECTION
- Long press the controller’s
buttons for 2 seconds until the Channel indicators 3 and 4 flash, then release the button. - Open your phone’s Bluetooth list, find the device named “Leadjoy-Z1 Lite”, and click to connect.
- The connection is successful when the channel indicator stays solid.
* If the connection is unsuccessful, please press and hold the controller’s Home + Capture buttons for 2 seconds to re-enter pairing mode.
iOS CONNECTION TUTORIAL
BLUETOOTH CONNECTION
- Long press the controller’s
buttons for 2 seconds until the Channel indicators 2, 3, and 4 flash, then release the buttons. - Open your phone’s Bluetooth list, find the device named “Xbox Wireless Controller”, and click to connect.
- The connection is successful when the Channel indicator stays solid.
* If the connection is unsuccessful, please press and hold the controller’s Home + Capture buttons for 2 seconds to re-enter pairing mode.
ADVANCED TUTORIAL
BACK BUTTON SETTINGS
M1, M2, M3, and M4 have no default key value. The Back Buttons can be mapped as single or multiple keys (up to 12) Can be mapped to: A/B/X/Y/L/R/ZL/ZR/L3/R3/+ button/- button/D-pad/left stick/right stick
- To set the key values for M1, M2, M3, or M4: Simultaneously press and hold the Capture Button and the M1, M2, M3, or M4 button until the right stick ring light starts flashing white slowly. Then, press the key you wish to map, followed by pressing the M1, M2, M3, or M4 button. When the left/right stick ring light returns to its original color, the key value setting for M1, M2, M3, or M4 is complete. * For combination keys, the interval time between each key press will be recorded based on the time taken during the mapping process.
- To cancel the key values for M1, M2, M3, or M4: Simultaneously press and hold the Capture Button and the M1, M2, M3, or M4 button until the left/right stick ring light starts flashing white slowly, then press the M1, M2, M3, or M4 button. When the left/right stick ring light returns to its original color, the key value cancellation for M1, M2, M3, or M4 is complete. * If the setting process exceeds 10 seconds, it will automatically save and exit.
TURBO SETTINGS
- Speed: 20HZ
- Assignable Buttons: A/B/X/Y/L/R/ZL/ZR/Capture Button
- To set Turbo function: Press and hold the Capture Button, then press the key you want to set to enable the Turbo function. Repeat this operation to cancel the setting.
- To clear the Turbo function for all keys: Double-click the Capture button. * The setting will still be saved after a restart. BUTTON COMBINATION
STICK & TRIGGER CALIBRATION
- With the controller powered on, press and hold the
button until the right stick ring light flashes white slowly. - Press LT and RT to their limits 3 times, rotate the left and right sticks fully 3 times each, then press
. Wait for the right stick ring light to return to its mode indicator color to complete calibration.
GYROSCOPE CALIBRATION
Place the controller horizontally on a flat surface, press and hold the
button for 3 seconds. At this point, the controller’s Home Indicator will flash red and blue alternately rapidly. Wait for the right stick ring light to return to its mode indicator color to complete calibration.
INSTALL VLEAD SOFTWARE
Visit cn.leadioy.top official website or scan the QR code on the right with your phone to download the “Vlead” mobile app. This app enables firmware upgrades, button testing functions, etc.
CONTROLLER RESET
In case of abnormal behavior or being unable to power the controller on or off, you can use an object similar to the size of a SIM ejector pin to press the reset button located in the circular hole on the back of the controller to force a shutdown.
PLEASE READ THIS PRECAUTIONS CAREFULLY
- CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if swallowed or inhaled.
- DO NOT use the product near fire.
- DO NOT expose to direct sunlight or high temperatures.
- DO NOT leave the product in a humid or dusty environment. DO NOT impact the product or cause it to fall due to strong impact. DO NOT touch USB port directly or it might cause malfunctions. DO NOT strongly bend or pull cable parts. Use a soft, dry cloth while cleaning. DO NOT use chemicals such as gasoline or thinner.
- DO NOT disassemble, repair or modify.
- DO NOT use for purposes other than its original purpose. We are NOT responsible for accidents or damage when used for non-original purposes.
- DO NOT look directly at the optical light. It might damage your eyes.
- If you have any quality concerns or suggestions, please contact GameSir or your local distributor.
WASTE ELECTRICAL & ELECTRICAL EQUIPMENT INFORMATION
CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRICAL EQUIPMENT)
Applicable in the European Union and other European countries with separate collection systems. This mark on the product or accompanying documents means that it should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product to designated collection points where it will be accepted free of charge. Alternatively, in some countries you may be able to return your products to your local retailer upon purchase of an equivalent new product. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier for further information. If you do so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling, thereby preventing negative potential effects on the environment and human health.
DECLARATION OF CONFORMITY
WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio
IC CAUTION
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
CE STATEMENT OF COMPLIANCE WITH EU DIRECTIVE
Hereby, Shenzhen Dynamic Fingertip Network Technology Co., Ltd. declares that this GameSir Cyclone 2 Controller is in compliance with Directive 2014/30/EU, 2014/53/EU & 2011/65/EU and its amendment (EU) 2015/863.
CUSTOMER SERVICE
https://leadjoy.top/pages/contact-us
Documents / Resources
 |
LEAJOY Z1 LITE Multi Platform Wireless Game Controller [pdf] User Manual 2BGXM-LYZL, 2BGXMLYZL, Z1 LITE Multi Platform Wireless Game Controller, Z1 LITE, Multi Platform Wireless Game Controller, Wireless Game Controller, Game Controller, Controller |
