LC-POWER LC-GAN-65 GaN Charger User Manual

Contents hide

1 LC-POWER LC-GAN-65 GaN Charger

2 Product Information

3 Product Usage Instructions

4 Technical datas

5 Notes on usage

6 Troubleshooting

7 Documents / Resources

7.1 References

8 Related Posts

LC-POWER LC-GAN-65 GaN Charger

Product Information

Specifications

Input Voltage: AC 110-240 V, 50/60 Hz, 1.6 A

Output Power:
- USB-C (1): 65.0 W max.
- USB-C (2) / USB-A: 15.0 W max.
Output Voltage:
- USB-C (1):
  - DC 5.0 V / 3.0 A = 15.0 W
  - DC 9.0 V / 3.0 A = 27.0 W
  - DC 12.0 V / 3.0 A = 36.0 W
  - DC 15.0 V / 3.0 A = 45.0 W
  - DC 20.0 V / 3.25 A = 65.0 W
- USB-C (2) / USB-A:
  - DC 5.0 V / 3.0 A = 15.0 W

Combined Output: USB-C (1) + (USB-C (2) + USB-A) = 45.0 W + 15.0 W
Standby Consumption: < 0.5 W

Efficiency: up to 86.66% @ 100% Load
Compatible with any device with USB-C (and USB-A) connector (5/9/12/15/20 V)

Product Usage Instructions

Charger Usage Guidelines

Use only a matching charger for your device as indicated on the label sticker.

Avoid intense heat and moisture.
Do not use the charger in open or wet environments.

If you encounter any issues, contact your retailer for assistance.
The product should only be serviced or repaired by trained personnel.

Usage Recommendations

Check your device’s parameters (voltage, current) before using the charger.

Only use the charger with compatible devices to prevent damage.
Avoid rolling up, squeezing, or stretching cables to prevent cable breakage.

If you notice any damage or abnormalities (noise, overheating, smoke), stop using the charger immediately.
Keep the charger away from heat sources and flammable materials.

Do not connect the charger to devices other than the intended ones.
Unplug the charger from the socket when not in use.

Safety Precautions

The charger may become warm during use; this is normal.
Avoid dropping, hitting, or exposing the charger to fluids.
Do not let the charger hang freely.

Frequently Asked Questions (FAQ)

Q: What should I do if I notice my charger is overheating?
A: Stop using the charger immediately, unplug it from the socket, and contact the retailer for assistance.
Q: Can I use any charger with my device?
A: No, use only a matching charger as specified on your device or previous charger label to avoid damage.
Q: What should I do if I suspect damage to the charger or cables?
A: Cease using the charger, unplug it from the socket, and inspect for any visible damage. Contact trained personnel for further assistance if needed.

Please read the manual carefully before using the product.

Compatible to any
device with USB-C
(and USB-A) connector
(5/9/12/15/20 V)

WARNING
Please use only a matching charger for your device. Make sure by checking the label sticker on your device or your previous charger.
Avoid intense heat and moisture. If you face a problem with your product, please contact your retailer. The product shall only be serviced and/or repaired by trained personnel

Technical datas

Input voltage : AC 110-240 V, 50/60 Hz, 1,6 A

Output power : USB-C (1): 65,0 W max. USB-C (2) / USB-A: 15,0 W max.
Output voltage:
- USB-C (1): USB-C (2) / USB-A:
- DC 5,0 V / 3,0 A = 15,0 W DC 5,0 V / 3,0 A = 15,0 W
- DC 9,0 V / 3,0 A = 27,0 W
- DC 12,0 V / 3,0 A = 36,0 W
- DC 15,0 V / 3,0 A = 45,0 W
- DC 20,0 V / 3,25 A = 65,0 W
Combined : USB-C (1) + (USB-C (2) + USB-A) = 45,0 W + 15,0 W

Standby consumption: < 0,5 W Efficiency: bis zu / up to 86,66 % @ 100 % Last / load
Security circuitry:
- OCP ( Over-current protection)
- OLP ( Over-load protection)
- OVP (Over-voltage protection)
- OTP (Over-temperature protection)
- SCP (/ Short-circuit protection)

Notes on usage

Please check the parameters of your device carefully (voltage, current).
Do only use the charger with compatible devices to avoid severe damage to your product.

Do not roll up, squeeze or stretch cables to avoid a cable break or let it hang freely.
If any damage on cables or the charger itself occurs of if you notice any noise, overheating or smoke, turn off the power and stop using the charger immediately.
The surface temperature of the charger will increase when used, please keep it away from additional heat sources and easy flammable materials. Also avoid the charger being dropped, hit on or soaked with any fluids. Do not connect the charger to other than the intended devices. When the charger is not used, please unplug it from the socket.