ZEROXCLUB B3C-M Wireless Backup Camera System User Manual

Choose a location close to the reversing lights/side
lights/running lights for easy power and ground connections. Secure
the camera using included brackets/screws and adjust the angle.

Note: It is recommended to test the system with
temporary mounting and wiring before final installation.

Install the Rear Cameras

Mark the desired camera mounting position and pre-drill holes
for the bracket.
Install the bracket and align it for optimal view, then tighten
all screws securely.

Install the Side Cameras

Carefully remove the camera screws to access the dome camera
and base assembly.

Secure the base to your vehicle’s mounting location using
pre-drilled holes for the bracket.
Position the housing and rotate the dome camera to your
preferred angle, then tighten all screws securely.

Frequently Asked Questions (FAQ)

Q: What should I do if any item is damaged or missing from the
package?

A: Contact us at sales@uszeroxclub.com with your order number
from Amazon and pictures of the damaged or missing part for quick
assistance.

Q: How can I ensure successful testing before permanent
installation?

A: Make sure all cables are securely connected and if any issues
occur, contact sales@uszeroxclub.com with a video/photos of the
issue.

“`

View Fullscreen

ZEROXCLUB Instructions Manual
*The packing contents may be different based on the kit you purchased. Please take the actual product as standard.
Wireless Backup Camera System Model: B3C-M/B4C-M
Any questions or suggestions please send an email to customer service via
sales@uszeroxclub.com
Visit our websitehttps://www.uszeroxclub.com

ZEROXCLUB Instructions Manual
TABLE OF CONTENTS
TABLE OF CONTENTS …………………………………………………………….. 1 SYSTEM TEST GUIDE ……………………………………………………………… 1 WARRANTY ……………………………………………………………………………… 1 BEFORE USING ……………………………………………………………………….. 2 WHAT IS IN THE BOX ………………………………………………………………. 2 SPECIFICATIONS …………………………………………………………………….. 3 INSTALL GUIDE ……………………………………………………………………….. 3
Safety Precautions …………………………………………………………………….. 3 Installation Steps ………………………………………………………………………..4
Step 1: Mount the Camera ……………………………………………………….. 4 Step 2: Power the Camera …………………………………………………………5 Step 3: Install the Monitor ……………………………………………………….. 5 Step 4: Power the Monitor ………………………………………………………..6 Step 5: Test & Adjust ……………………………………………………………….. 6 OPERATING INSTRUCTION ……………………………………………………..6 Monitor Buttons and Icons …………………………………………………………. 6 Change Menu Settings ……………………………………………………………….8 Menu Setting …………………………………………………………………………….. 8 PAIRING Settings ……………………………………………………………………… 8 Pairing Procedure ……………………………………………………………………….8 PICTURE Settings …………………………………………………………………….. 9 MIR-FLIP Settings …………………………………………………………………….10 MODE Settings …………………………………………………………………………10 P-LINE Settings ………………………………………………………………………..10 SYSTEM Settings ……………………………………………………………………. 11 RECORD Settings …………………………………………………………………… 11 PLAY Settings …………………………………………………………………………. 12 TROUBLESHOOTING …………………………………………………………….. 13 FAQS ……………………………………………………………………………………….15

ZEROXCLUB Instructions Manual
SYSTEM TEST GUIDE
To verify full functionality before permanent installation, please follow these steps: 1. Power On the Monitor: Connect the monitor to a temporary 12V power source (e.g., vehicle’s cigarette lighter or a portable power supply). Check: Indicator light and buttons should illuminate, confirming power. 2. Test Camera & Monitor Connection: Power the camera separately (via included power cable or vehicle reverse light wire temporarily). Check: Live view should display on the monitor. 3. Verify All Functions: Test these features: Video feed (clear image day/night). Buttons (menu navigation, brightness adjustment). 4. Confirm that the accessories are complete.
If any issues occur: Ensure all cables are securely connected. Contact sales@uszeroxclub.com with a video/photos of the issue. Note: Permanent installation should only proceed after successful testing.
WARRANTY
ZEROXCLUB offers a full 18 months warranty and 3 months replacement policy. We also provide lifetime technical support to ensure that you enjoy your modern backup camera for many years to come. To request warranty service or technical assistance, please CONTACT US immediately at sales@uszeroxclub.com (we will reply within 24 hours). When contacting us, please provide your order number or proof of purchase (order invoice), along with photos/videos clearly showing the issue and a brief description of the problem. Our dedicated support team will either remotely troubleshoot your issue or arrange for replacement of defective components when applicable. Customer satisfaction is our top priority, and we’re committed to resolving any concerns to your complete satisfaction. Note: Proof of purchase is required for all warranty claims. This warranty is not transferable.
1

ZEROXCLUB Instructions Manual
BEFORE USING
Make sure your package includes the following listed items completely. If any item is damaged or missing, contact us at sales@uszeroxclub.com. It would be better if you write down the order number from Amazon, include pictures of the damaged or missing part in your email, so that we can handle the problem much more quickly.
WHAT IS IN THE BOX
NOTE: The contents included may be different based on the kit you purchased. Please take the actual product as standard.
2

ZEROXCLUB Instructions Manual

SPECIFICATIONS

Monitor

Display

7” LCD monitor

Connector Type Working Current

DC female connector DC12V 1~2A

Item Weight Monitor Dimensions

0.66 pounds 7.13(L) x 4.67(H) x 1(D) in Camera

Image Sensor

CMOS

Effective Pixels

1920 x 1080

Waterproof Rating Power Consumption
(@DC 12V) Operating Temperature
Compatible Display Rear Camera Side Side Camera Side Wireless Frequency

IP69K 250mA (IR ON) >10mA (IR OFF)
-4°F~ 158°F System-equipped display 2.95(L) x 1.85(H) x 2.36(D) in 2.76(L) x 3(H) x 2.76(D) in
2.4G

INSTALL GUIDE
The system components are designed to be assembled without difficulty and with simple tools.
Safety Precautions
· Use the correct size cable and connector to power the camera(s) · Ensure the power supply circuit has circuit protection · Connect the camera(s) to a 12-24V DC circuit only · Use insulated tools when working with power supply · Use correct safety equipment when working at elevated levels · Ensure correct polarity of 12V DC power supply to the camera.
Red = Positive.Black=Negative. · Excessive heat can be caused by a loose connection.
3

ZEROXCLUB Instructions Manual

Installation Steps
Step 1: Mount the Camera Choose a location: Choose a location close to the reversing lights/side lights/running lights so you can easily splice the power and ground connections or where you want to install. Secure the camera using included brackets/screws. Adjust the camera angle.
*Recommend to test system with temporary mounting and wiring before final installation.

1.1 Begin by marking the desired camera mounting position and pre-drilling holes for the bracket.

1. Install the Rear Cameras

1.2 Then install the bracket with 1.3 Align the bracket, position the

supplied screws, keeping them camera for optimal view, then

loose for adjustment.

fully tighten all screws to secure.

2. Install the Side Cameras

2.1 Begin by carefully removing the camera screws and opening the
housing to access the dome camera and base assembly, being
particularly cautious with the delicate antenna wire connecting these components to avoid damage.

2.2 After exposing the internal mechanism, secure the base to your vehicle’s mounting location using pre-drilled holes for the
bracket .

2.3 Then position the housing and rotate the dome camera to your preferred angle, verifying the image is properly framed before finalizing the installation by securely tightening all screws.

ZEROXCLUB Instructions Manual

Step 2: Power the Camera

To properly install the backup camera, first use a voltage meter to identify the positive and negative wires in your vehicle’s light circuit by testing for 12V DC power – the wire showing positive voltage when the reverse gear is engaged is your positive lead.

Once identified, connect the camera’s red wire to this positive light wire (12V) and the black wire to the negative/ground wire, ensuring all connections are secure and properly insulated for reliable operation.

Mount the antenna(s) Connect the power cord to Power the camera(s)

to camera(s)

camera(s)

Use Power Cord

Step 3: Install the Monitor 1. Begin by assembling the monitor to its mounting bracket
2. Installing the antenna vertically, then position the unit on your windshield or dashboard in a location that provides clear viewing without compromising driving visibility or safety.
3. Adjust the bracket to obtain the best viewing angle.
*Do not allow water to enter the LCD Display

U-shaped Bracket Installation

Put on the sunshade as the blue arrows.

Take out all the tools. Put the bracket on the fixed directions as the blue dotted lines shows

Align the screw holes

Fix or adjust the screen angle and screw on the knob bolts

ZEROXCLUB Instructions Manual Suction Cup Mount Installation

Step 4: Power the Monitor

Power via cigarette lighter (plug-and-play) or hardwired to fuse box (for permanent power)

Mount the antennas to Connect the power cord or Power the monitor

the monitor

car charger to the monitor

Use Car Charger

Use Power Cord

Step 5: Test & Adjust Activate the cameras. Adjust each camera’s mounting angle to achieve a clear, unobstructed view of both rear and side areas. Ensure the frame captures the road surface while minimizing excessive sky or ground visibility.
OPERATING INSTRUCTION
Monitor Buttons and Icons
6

ZEROXCLUB Instructions Manual

MENU
POEWR MODE SYS AV POEWR Red Tag Memory card slot
CAM1
REC

Press to show menu or return to the previous menu.
A Function Decrease button. Select backward in menu operation. While viewing the non-menu panel, press the ” button once to display guidelines and activate H adjustment mode, pressing ” multiple times moves guidelines up/down; press twice to switch to Width (W) mode for adjusting guideline spacing with ” presses; press three times for horizontal M mode to shift guidelines left/right using ”; and press four times to completely hide the guidelines from view. A Function Increase button. Select forward in menu operation
Putting the monitor on standby and waking it up. A Confirm/Recording button. Press to star/stop recording. Or press this button to confirm. Turn on/off the parking guidelines. A Channel Switch button. Press it to switch screen to full screen or split screen. Putting the monitor on standby and waking it up. There is a screen protective film on the screen, it is used to remove it. Please be careful to remove it. The card slot cover is placed separately in the package and needs to be closed and tightened by yourself. This indicates that there is no paired camera on that channel yet. It means the strength of the signal between the camera and the monitor. CAM 1/2/3/4: The channel number is shown on the top left of the screen. Press the AV button to switch the camera channel. Rewrite: This shows this sign once you switched on the rewrite function. The icon will shown in the top of the screen while recording video. If there is a problem with the recording, please try to format the memory card. Press the MODE button to star/stop recording. This indicates that the memory card inserted.

ZEROXCLUB Instructions Manual
(1) The main menu cannot be accessed during split-screen monitoring. To enter the menu panel, press AV to switch to single-screen mode, then press MENU (button is disabled in split-screen view)
(2) The POWER button is non-functional during video file playback (3) The system automatically begins recording a new file when switching channels (4) The content displayed on the screen is the recorded footage. Turning off the
screen will stop the recording process. (5) Guidelines can be individually enabled/disabled per channel through the P-LINE
settings.
Change Menu Settings
Menu Setting
There are eight menu options that allow you to set up the system before operation.
NOTICE In split screen mode, the menu cannot be accessed, please press
AV to switch to single screen first.
PAIRING Settings Pairing Procedure
a. The cameras are factory-paired for QC testing. b. If you cannot see video from a camera on your monitor (“NO SIGNAL”
appears), or if you’re adding an extra camera, please follow these pairing steps. c. For best results, position the camera and monitor within 3 feet (1 meter) of each other during pairing. This close proximity ensures successful connection within the limited pairing time window.
8

ZEROXCLUB Instructions Manual
Pair with a camera 1. Mount antennas securely on both camera(s) and monitor (critical for stable wireless connection) 2. Disconnect camera power completely 3. Connect monitor to 12V DC power source. Press AV to select an available full channel (menu functions require full-screen mode) 4. Press MENU select PAIRING icon (20-second countdown begins)
5. During countdown, power on the camera*Camera must be powered after pairing countdown starts 6. Live view will appear automatically upon successful pairing 7. Repeat process for additional camera(s) Pairing Notes:
(1) If Pairing Fails: Repeat the pairing steps exactly as outlined. If unsuccessful after 2 attempts, contact sales@uszeroxclub.com for immediate assistance.
(2) Timing is Critical: Complete pairing within 20 seconds of entering pairing mode. If timeout occurs, restart the process.
(3) Channel Reassignment: To move a camera to a different channel (e.g., from CH1 to CH2): Switch to the target channel (press AV select CH2). Follow standard pairing steps.
(4) Signal Loss Recovery: If the screen displays “NO SIGNAL”, re-pair the affected camera.
(5) Pair one camera at a time. Repeat the full process for each additional camera.
PICTURE Settings
To modify screen BRIGHTNESS, CONTRAST or HUE settings: Use MODE to highlight the BRIGHTNESS or CONTRAST or HUE Icon red, then press / to change the setting. Press MODE to confirm your selection or press MENU to return to the previous page.
9

ZEROXCLUB Instructions Manual
MIR-FLIP Settings
To modify the display orientation: Press MENU Enter the MIR-FLIP menu Press / to set the camera image as NORMAL, MIRROR, FLIP or MIR-FLIP Press MODE to confirm your selection or press MENU to return to the previous page.
*Control camera mirroring and flipping, on a per camera basis.
MODE Settings
To configure multi-camera display layouts: Press MENUGo into MODE Press MODE Press / to choose the split-screen mode you want Press MODE to confirm your selection or press MENU to return to the previous page.
P-LINE Settings
10

ZEROXCLUB Instructions Manual
Turn on/off the parking guidelines.
Press MENU Go into P-LINE Press MODE to highlight the
P-LINE icon red Press / to ON or OFF Press MODE to confirm your selection or press MENU to return to the previous page.
*The parking guide line need to be controlled individually on each camera screen. * If the P-LINE function is not turned on for other camera channels, the parking guideline will not be displayed.
SYSTEM Settings
The screen LANGUGE and TIME settings are found in the “SYSTEM” section. Press MENUGo into SYSTEM Press MODE to highlight the LANGUAGE or TIME icon red Press / to adjust the values Press MODE to confirm your selection or press MENU to return to the previous page.
RECORD Settings
Memory card settings: REWRITE, FORMAT. Press MENUGo into RECORD Press MODE to highlight the REWRITE or FORMAT icon red Press / to ON or OFF
11

ZEROXCLUB Instructions Manual
Press MODE to confirm your selection or press MENU to return to the previous page.

REWRITE FORMAT

It will automatically overwrite the previous videos when the memory card is full. If you turn on it, please remember to save the video file in time if you need it to avoid it being overwritten.
It will clear all data in the system. If not turned it off, the formatting will be always happening. Copy out the useful recording material first to avoid losing important videos before formatting. NOTICE Recording can only record what is on the screen, not all cameras unless in split screen mode.

PLAY Settings
You can playback the recorded videos on the monitor.
Press MENUGo into PLAY Press / to choose the Recording Files Press MODE to confirm and then press MODE again to pause/play press MENU to return to the previous page.

* This panel cannot be accessed if an memory card is not mounted. * There’s no recording file if you don’t press MODE to record. * The screen cannot be played back while the system is recording, if you want to play back, please press the MODE to stop recording first. * Re-start recording the second file when you switch channels. * The content displayed on the screen is the content recorded by the system.
12

ZEROXCLUB Instructions Manual
TROUBLESHOOTING
Camera Pairing Issues 1) Ensure the camera is receiving power. 2) Verify all wiring connections are secure and properly attached. Loose or incorrect wiring may
cause image transmission issues. 3) Check that the camera power lead is connected correctly (polarity matters). 4) Measure the voltage at the camera. If it’s below 12V, the transmitter may fail to function
properly. 5) Try manually pairing the system (refer to the pairing instructions). 6) If pairing fails in the same room, contact our support team at: sales@uszeroxclub.com with
video of pairing attempt. Monitor Won’t Turn On (No Button Light)
1) Inspect wiring for pinched/damaged cables/corroded connectors. Test the power supply (should show 12V+ DC output). Check for voltage drops during startup.
2) Test with alternative power sources – either a portable 12V battery or another vehicle’s 12V socket – to eliminate power supply as a potential issue.
3) Use other cigarette lighter adapter. Or use the included red and black DC pigtail power cable to hardwire the monitor, which will help determine whether the issue lies with the cigarette lighter or the monitor itself.
4) Disconnect power for 2 minutes. Reconnect and power cycle 3 times. Check for any indicator lights. If the screen remains blank after these steps, please contact us at sales@uszeroxclub.com and provide your Amazon Order ID for further assistance. Wireless Signal Issues
1) Ensure antenna is securely tightened in vertical position. 2) Look at the camera to find if the antenna wire is off. Check for damaged antenna connectors. 3) Large dense objects could be obscuring the signal. If possible, move the objects. 4) Avoid installation near high-voltage power lines/heavy machinery/Other 2.4GHz devices (WiFi
routers, Bluetooth devices or Tire pressure monitoring systems). Temporarily disable nearby 2.4GHz devices. 5) Perform manual pairing (refer to user manual). 6) We have the 10ft antenna extension cable, if you need it, please contact our customer service email: sales2@uszeroxclub.com with your Amazon order ID.
Blurry images on the monitor 1) Remove the protective film from the camera lens upon completion of installation. 2) The camera lens may be dirty. Wipe them with a piece of soft and clean cloth.
13

ZEROXCLUB Instructions Manual
3) Please contact our customer service email: sales2@uszeroxclub.com with your Amazon order ID and the picture of problem. Freezing
1) Temporary Interference (Under 3 Seconds): Brief freezing may be caused by temporary interference from: Weather conditions/Vehicle materials/External signal sources/Physical obstacles. These typically don’t affect overall image quality.
2) Memory Card Issues (Over 10 Seconds): Prolonged freezing often indicates: Loose memory card connection/SD card issue/Difficulty reading card data
Troubleshooting Steps: Reposition monitor away from potential signal blockers. Check camera antenna connections Power off and reseat memory card firmly. Test with alternative SD card. Format card in the device (backup data first). Test with memory card removed (if possible) to isolate issue. Try resetting monitor to factory settings. If issues persist: Please contact us at sales@uszeroxclub.com with a short video showing the freezing issue and your Amazon Order ID, we’ll provide assistance to resolve your issue promptly.
Night vision is poor or does not function
1) Dirty or blocked light sensor. Gently clean the sensor lens with a microfiber cloth and remove any physical obstructions
2) Verify installation isn’t near bright light sources. Test in complete darkness to confirm functionality. Note: This is normal operation, not a malfunction
3) Camera too close to marker lights (minimum 2″ required). Reposition camera following these steps: Measure current distance, relocate if under 2 inches and secure in new position.
4) Consider adding supplemental IR lighting if consistently poor performance in dark areas If problems continue after trying these solutions, please contact us at sales@uszeroxclub.com with Issue photostime of day when issue occurs and your order number.
Images too dark / bright on the monitor 1) Adjust the brightness and contrast settings. Reset to factory settings if needed. 2) Camera facing strong light (sun, headlights) may cause overexposure. Reposition the camera
to avoid direct light sources. Note: This is normal behavior, not a defect. 3) Polarized Sunglasses Incompatibility. Remove polarized sunglasses when viewing the
monitor. 4) Additional Checks: Ensure the camera lens is clean (dirt can affect exposure) or Test in
different lighting conditions to isolate the issue. Still having issues? Contact support with a photo/video of the problemyour order number and lighting conditions when the issue occurs.
14

ZEROXCLUB Instructions Manual
If you have any questions not mentioned above, just feel free to email us at sales@uszeroxclub.com. We’re always there for you!

FAQS

Question

Answer

What type of memory card should I use? The system supports 32G-128G memory card.

How do I keep my backup camera clean in the winter?

We suggest to coat the camera lens with a hydrophobic fluid, such as Rain-X, as a way to keep snow and slush from clinging to the lens.

How to turn on the night vision of the

It will be automatically turned on in the dark

camera?

environment.

Can I add an extra camera?

Yes, this system supports up to 4 cameras.

MENU SYSTEM P-LINE ON/OFF. How to turn on/off the Parking Guideline? Press the SYS button in the non-menu panel.

For optimal performance, check that all power

Why the screen is flicking?

connections are tight and use a stable power source,

as inconsistent current can disrupt image quality.

1) Please press MODE to exit the recording and

press AV switch to single screen to see if the

buttons can operate.

2) Remove the memory card, reboot the system,

The MENU button can not work

then check if the system is locked.

3) If it still can’t work well after try, please contact us

in time at sales@uszeroxclub.com with the

video of the issue and your Amazon Order ID, we

The monitor/camera emits smoke after connection

will help you fix it. 1) The positive and negative connections are
reversed and cause a short circuit. Check if the

polarity on your vehicle body itself is reversed.

Make sure the camera’s positive side and

negative side to coincide with the vehicle body’s

positive side and negative side. Please read the

ZEROXCLUB Instructions Manual

How to start recording a video?
How to check if the camera unit is receiving power?

installation guide carefully before installation. 2) The voltage and current are too high. Press the MODE button in the non-menu panel.
To verify if your camera unit is receiving power, cover the camera’s light sensor (typically located near the infrared light) with your hand – if the infrared light illuminates, this confirms the camera is properly powered. If no light appears, please check your wiring connections or try an alternate power source and cable to test the unit.

Customer Support Email: sales@uszeroxclub.com

Documents / Resources

ZEROXCLUB B3C-M Wireless Backup Camera System [pdf] User Manual
B3C-M, B4C-M, B3C-M Wireless Backup Camera System, Wireless Backup Camera System, Backup Camera System, Camera System

References

User Manual

ZEROXCLUB B3C-M Wireless Backup Camera System User Manual

B3C-M Wireless Backup Camera System

Product Information

Specifications

Product Usage Instructions

Safety Precautions

Installation Steps

Step 1: Mount the Camera

Frequently Asked Questions (FAQ)

Q: What should I do if any item is damaged or missing from the
package?

Q: How can I ensure successful testing before permanent
installation?

Documents / Resources

References

Leave a comment

Cancel reply