13246-002 Tool Box Without Mounting System
“
Specifications:
- Art.-Nr: 13246-002
Product Information:
This product is a mounting kit consisting of various components
such as screws, brackets, washers, and bits for assembling parts on
a vehicle.
Product Usage Instructions:
Assembly Tips:
Before tightening any screws, loosely pre-assemble and align all
components on the vehicle.
Tightening Instructions:
After pre-assembly, tighten the screws to the specified torque
values as indicated below:
- M6x12 screws: 6 Nm torque
- M8x45 screws: 19 Nm torque
Component List:
- Lens head screw M8x20
- Lower bracket with U-washer
- Upper bracket
- Pan head screw with pin M6x12
- Washer, Thread locking fluid, Cylinder screw M6
- 1/4 Torx T30 security bit
- Washer M8 with U-washer
FAQ:
Q: What should I do before tightening the screws?
A: Pre-assemble and align all parts loosely on the vehicle
before tightening the screws.
Q: What are the torque values for different screw sizes?
A: The torque values are 6 Nm for M6x12 screws and 19 Nm for
M8x45 screws.
“`
Werkzeugbox ohne Trägersystem
Tool box without mounting system| Boîte à outils sans système de fixation | Cassetta portattrezzi senza sistema di supporto | Caja de herramientas sin sistema de soporte
Art.-Nr: 13246-002
8
4
10
3
7
9
Legende/Key/file Légende
Anbau Tipp
Schraube
Fitting tip Astuce de montage
Screw Vis
1
Achtung Attention Attention
Schraubensicherung Thread locking fluid Freinfilets
Vergrößerung Magnification Grossissement
M
Drehmoment Torque
Nm Torque
Montagepaste Fitting lubricant Lubrifiant de montage
Reiniger Cleaner Nettoyant
Bauteil DE Die Farben der Abbildungen dienen nur der Veranschaulichung.
# component EN The colors are for illustrating purposes only.
composant FR Les couleurs utilisées sont à titre indicatif seulement.
DIN
ISO
Menge
quantity quantité
1 Linsenflanschschraube / Lens head screw
M8x20 7381
7381
1
2 Halter unten / Lower bracket 3 U-Scheibe / Washer
1
6
M8 9021
7093
1
4 Halter oben / Upper bracket
1
5 Linsenkopfschraube mit Pin / Pan head screw with pin
M6x12 7380
7380
5
6 U-Scheibe / Washer 7 Schraubensicherung / Thread locking fluid 8 Zylinderschraube / Cylinder screw
M6 125
7089
5
1
M8x45 6912
6912
2
5
2
9 Bit 1/4″ Torx 30 mit Bohrung / 1/4″ Torx T30 security bit
1
10 U-Scheibe / Washer
M8 125
7089
2
1
Wunderlich GmbH I Joseph-von-Fraunhofer-Str. 6-8 I DE·53501 Grafschaft-Ringen I info@wunderlich.de I www.wunderlich.de I Tel.: +492641-3082-0
15052025
1
Bitte alle Anbauteile lose am Fahrzeug vormontieren und ausrichten. Erst danach die Schrauben nach Vorgabe
anziehen.
First, tighten all screws only loosely. After mounting all parts, the
screws should be tightened to the torque specified.
Tout d`abord, ne serrez pas toutes les vis sans les serrer. Après
avoir monté toutes les pièces, les vis doivent être serrées au
couple spécifié.
M6x12
6 Nm
M6x12
6 Nm
M6x12
6 Nm
M6x12
6 Nm
M6x12
6 Nm
2
Wunderlich GmbH I Joseph-von-Fraunhofer-Str. 6-8 I DE·53501 Grafschaft-Ringen I info@wunderlich.de I www.wunderlich.de I Tel.: +492641-3082-0
2
3
4
Original
19Nm
M8x45 19Nm
Original 19Nm
Original 19Nm
M8x45 19Nm
Original 19Nm
M8x20 19Nm
3
Wunderlich GmbH I Joseph-von-Fraunhofer-Str. 6-8 I DE·53501 Grafschaft-Ringen I info@wunderlich.de I www.wunderlich.de I Tel.: +492641-3082-0
Documents / Resources
 |
Wunderlich 13246-002 Tool Box Without Mounting System [pdf] User Guide 13246-002, 15052025, 13246-002 Tool Box Without Mounting System, 13246-002, Tool Box Without Mounting System, Mounting System, System |