Vcontrol 20231115 Video Intercom Access User Manual
INTRODUCTION
The device is a single door multifunction standalone access controller or a Wiegand output reader. The operation is very user-friendly, and low-power circuit makes it long service life.
Features
- Metal case, anti-vandal
- Waterproof, conforms to IP65
- Video calling based on WiFi
- One relay, 1,000 users (990 common + 10 visitor)
- PIN length: 4-6 digits
- Card type: 125KHz EM Card/13.56MHz Mifare Card
- Can be used as Wiegand reader with buzzer output
- Card block enrollment
- Tri-color LED status display
- Pulse mode, Toggle mode
Specification
User Capacity
Common User |
1000
900 (Fingerpint version support 100 fingerprints)10 |
Operating Voltage
Working Current Idle Current |
12~18V DC<150mA<60mA |
Proximity Card Reader
Radio Technology Read Range |
EM/Mifare
125KHz/13.56MHz2-6 cm |
PIN Length | 4-6 digits (Keypad version only) |
Wiring Connections | Relay Output, Exit Button, Wiegand Input, Wiegand Output |
Relay Adjustable Relay Output Time Lock Output Load | One (NO, NC, Common)0~99 Seconds (5 seconds default)2 Amp Maximum |
Wiegand Interface | EM card: Wiegand 26~44 bits input & output. Mifare card: Wiegand 26-44bits56bits, 58bits input & output. (Factory default: Wiegand 26bits for EM card, Wiegand 34bits for Mifare card) |
PIN Output | 4 bits, 8 bits(ASCII), 10 digits Virtual Number (Factory Default: 4 bits) |
Environment Operating Temperature Operating Humidity | Meets IP65
|
Physical
Colour |
Zinc-Alloy
Silver & Black |
Carton Inventory
Diode 1N4004 (For relay circuit protection)
Wall Anchors
Self Tapping Screws
Screw Driver
Documents / Resources
![]() |
Vcontrol 20231115 Video Intercom Access [pdf] User Manual 20231115 Video Intercom Access, 20231115, Video Intercom Access, Intercom Access, Access |