Usingwin US-65550 Display Frame Instructions

Contents hide

1 Usingwin US-65550 Display Frame

2 Wall hanging diagram

3 Documents / Resources

3.1 References

4 Related Posts

Usingwin US-65550 Display Frame

Warning:
Please read the instruction manual carefully and keep it in good condition.

Keep the display frame in ventilated condition, away from the fire and away from the heat source .At the same time it Stay s away from the water, the liquid and the Water Vapor.
Don`t put anything on the photo frame, for example a lit candle, a dishcloth and a vases.

Put the display frame in the stable and safe place ,and away from your children.
The display frame must be fixed by a professional on the wall.

Please use the power adapter and power cord the manufacturer provides, and the power plug should be kept unplugged easily.
Please clean the display frame with a dry cloth(without the water and the cleaning agent).

The power should be cut off when you are fixing the display frame.
If there is an abnormal phenomenon in the use of the process, Please consult the manufacturer or find a professional to repair the photo frame.

please separate the power cord from the cable network to avoid electric shock or to start a fire.
The display frame should be fixed on a vertical wall( <15°）to avoid falling and causing personal injury。

The display frame shouldn`t be fixed in an enclosed area (for example the bookcase).
Do not open the back cover to avoid electric shock and causing personal injury.

Prevent anything to fall in the photo frame(including a metal, a silt ,a water, a liquid and a Water Vapor), or avoid to cause a Short circuit.
Don’t hit the LCD screen to avoid damage, and away from your children.

Wall hanging diagram

Right side

Back side
Fixed on the wall

Crosswise
Longitudinally

Side aspect

Attention:
The display frames of different models or different batches could be different about their ports. Please refer to the material object. The display panel is made up of many pixels and its production requires exquisite workmanship. So there may be bright spots on the screen or dark spots, but will not affect the normal function of the product.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.