UNI-T UTG90OE Series Function Generator
Specifications
- Model: UTG900E
- Arbitrary Waveforms: 24 types
- Output Channels: 2 (CH1, CH2)
Enable Channel Output
Press the designated button to quickly enable the channel 1 output. The backlight of the CH1 key will turn on as well.
Output Arbitrary Wave
The UTG900E stores 24 types of arbitrary waveforms.
Enable Arbitrary Wave Function
Press the specified button to enable the arbitrary wavefunction. The generator will output the arbitrary waveform based on the current settings.
FAQs
Q: How many types of arbitrary waveforms are stored in UTG900E?
A: UTG900E stores 24 types of arbitrary waveforms. You can refer to the list of built-in arbitrary waves for more details.
Q: How to enable the arbitrary wave function?
A: To enable the arbitrary wave function, press the designated button on the device. The generator will then output the arbitrary waveform based on the current settings.
Test Equipment Depot – 800.517.8431 – TestEquipmentDepot.com
UNI,-:
4) Enable Channel Output
Press to enable the channel 1 output quickly. Backlight of the CH1 key will be turn on
as well.
The shape of frequency sweep waveform in oscilloscope is shown below:
Output Arbitrary Wave
UTG900E stores 24 types of arbitrary waveform (See the list of built-in arbitrary wave).
Enable Arbitrary Wave FunctionPreface
Thank you for purchasing the new function generator. In order to use this product safely and correctly, please read this manual thoroughly, especially the Safety Information part. After reading this manual, it is recommended to keep the manual at an easily accessible place, preferably close to the device, for future reference.
Copyright Information
Uni-Trend Technology (China) Co., Ltd, all rights reserved. UNI-T products are protected by patent rights in China and other countries, including issued and pending patents.
Uni-Trend reserves the rights to any product specification and pricing changes. Uni-Trend reserves all rights. Licensed software products are properties of Uni-Trend and its subsidiaries or suppliers, which are protected by national copyright laws and international treaty provisions. Information in this manual supersedes all previously published versions.
UNI-T is the registered trademark of Uni-Trend Technology (China) Limited.
Uni-Trend warrants that this product will be free from defects for a three-year period. If the product is resold, the warranty period will be from the date of the original purchase from an authorized UNI-T distributor. Probes, other accessories, and fuses are not included in this warranty. If the product is proved to be defective within the warranty period, Uni-Trend reserves the rights to either repair the defective product without charging any parts or labor, or exchange the defected product to a working equivalent product. Replacement parts and products may be brand new, or perform at the same specifications as brand new products. All replacement parts, modules, and products are the property of Uni-Trend.
The “customer” refers to the individual or entity that is declared in the guarantee. In order to obtain the warranty service, “customer” must inform the defects within the applicable warranty period to UNI-T, and to perform appropriate arrangements for the warranty service. The customer shall be responsible for packing and shipping the defective products to the designated maintenance center of UNI-T, pay the shipping cost, and provide a copy of the purchase receipt of the original purchaser. If the product is shipped domestically to the location of the UNIT service center, UNIT shall pay the return shipping fee. If the product is sent to any other location, the customer shall be responsible for all shipping, duties, taxes, and any other expenses.
This warranty shall not apply to any defects or damages caused by ccidental, machine parts’ wear and tear, improper use, and improper or lack of maintenance. UNI-T under the provisions of this warranty has no obligation to provide the following services:
a) Repair any damage caused by the installation, repair, or maintenance of the product by non
UNIT service representatives.
b) Repair any damage caused by improper use or connection to an incompatible device.
c) Repair any damage or malfunction caused by the use of a power source which does not
conform to the requirements of this manual.
d) Any maintenance on altered or integrated products (if such alteration or integration leads to
an increase in time or difficulty of product maintenance).
This warranty is written by UNI-T for this product, and it is used to substitute any other expressed
or implied warranties. UNI-T and its distributors do not offer any implied warranties for merchantability
or applicability purposes.
For violation of this guarantee, UNI-T is responsible for the repair or replacement of defective
products is the only remedy available to customers. Regardless of whether UNI-T and its distributors
are informed that any indirect, special, incidental, or consequential damage may occur, the UNI-T
and its distributors shall not be responsible for any of the damages.
General Safety Overview
This instrument strictly complies with the GB4793 safety requirements for electrical equipment and
IEC61010-1 safety standard during design and manufacturing. It complies with the safety standards
for insulated over voltage CAT |I 300V and pollution level II.
Please read the following safety preventative measures:
• To avoid electric shock and fire, please use the dedicated UNI-T power supply appointed to the
local region or country for this product.
• This product is grounded through the power supply ground wire. To avoid electric shock,
grounding conductors must be connected to the ground. Please be sure that the product is
properly grounded before connecting to the input or output of the product.
• To avoid personal injury and prevent damaging the product, only trained personnel can perform
the maintenance program.
• To avoid fire or electric shock, please notice rated operating range and product marks.
• Please check the accessories for any mechanical damage before usage.
• Only use accessories that came with this product.
• Please do not put metal objects into the input and output terminals of this product.
• Do not operate the product if you suspect it is faulty, and please contact UNI-T authorized
service personnel for inspection.
• Please do not operate the product when the instrument box opens.
• Please do not operate the product in humid conditions.
• Please keep the product surface clean and dry.
Chapter 2 Introduction
This series of devices are economical, high-performance, multi-functional arbitrary waveform
generators that use direct digital synthesis (DDS) technology to produce accurate and stable
waveforms. UTG900 can generate accurate, stable, pure and low distortion output signals.
UTG900’s convenient interface, superior technical indexes and user-friendly graphical display
style can help users to complete study and test tasks quickly and improves work efficiency.
2.1 Main Feature
• Frequency output of 60MHz/30MHz, full-band resolution of 1uHz
• Use direct digital synthesis (DDS) method, sampling rate of 200MSa/s and vertical resolution
of 14 bits
• Low jitter square wave output
• TTL level signal compatible 6 digits high accuracy frequency counter
• 24 groups non-volatile arbitrary waveform storage
• Simple and useful modulation types: AM, FM, PM, FSK
• Support frequency scanning and output
• Powerful upper computer software
• 4.3 inches TFT color screen
• Standard configuration interface: USB Device
• Easy-to-use multi-functional knob and numeric keypad
Documents / Resources
 |
UNI-T UTG90OE Series Function Generator [pdf] UTG90OE Series Function Generator, UTG90OE Series, Function Generator, Generator |