RS-232 INTERFACE
PART # CI-RS232
INSTALLATION INSTRUCTIONS
| CABLE TYPES | |||
| LINE ID | DESCRIPTION | TYPE | NOTES |
 |
BRANCH | CAT 5 (MIN) | TOTAL BRANCH LENGTH NOT TO EXCEED 1000′ |
SIDE VIEW
RS232
SYMBOLS AS SHOWN
ON SUBMITTAL AND
CONSTRUCTION
DOCUMENTS
DEVICE PINOUT (FEMALE PORT)
| PIN | WIRE |
| 1 | NC |
| 2 | RxD |
| 3 | TxD |
| 4 | NC |
| 5 | GND |
| 6 | NC |
| 7 | RTS |
| 8 | CTS |
| 9 | NC |
TIPS / NOTES
- ENSURE CABLES ARE PLUGGED INTO BRANCH PORTS OF ROOM MANAGERS – DO NOT CONNECT TO SMARTNET OR SMARTPACKS
- ADDRESS DISPLAY – IF DEVICE HAS COMMUNICATION “AC” WILL BE SHOWN
- SERIAL CABLE TO 3RD PARTY DEVICE – MAX 30′
Touché Lighting Controls (a Product of ESI Ventures)
A: 2085 Humphrey Street, Fort Wayne, IN 46803
T: 888.841.4356
W: ToucheControls.com
Documents / Resources
 |
Touch Controls CI-RS232 Serial Interface [pdf] Installation Guide CI-RS232, CI-RS232 Serial Interface, Serial Interface, Interface |
