Spigen Find My App Instructions

If TagMe is not added to the Apple ID after being reset for 10 minutes, Bluetooth will stop transmitting signals to save power. You need to power off/on the battery five times to reset it again. Reset is successful if hear a different power-on sound. Then you can start adding devices again. The method is the same as 2.1.
If reset the added TagMe improperly, first you need to delete TagMe from Find My app and release the binding to Apple ID and then it can be added to any iOS device again. The adding method is the same as 2.1.

2. Operation Instructions

TagMe can help you easily track all kinds of items. As long as you hang one on your keychain and put one in your bag, you can see where your keys and bag are in Find My app.

2.1 Find items at close range – play sound function

Just adding one piece TagMe, finding things will be a breeze. You can click “Play a Sound” in the Find My app, or say “Hey Siri, Find my keys” to play a sound to indicate the location. If it’s hiding nearby, such as under a cupboard or in the next room, you can easily follow the sound to find it.

2.2 Automatically restore connection after disconnection

If the distance between the paired TagMe and the iOS device exceeds the Bluetooth connection distance (In the closed barrier-free space is 50m), when you click “Play Sound” in the Find My app, it will prompt that the connection cannot be made; If TagMe and the iOS device are in Bluetooth connection distance, click “Play a Sound” in the Find My app, it will play consecutive sounds, and you can find the items just following the sound.

2.3 Find items with help from hundreds of millions of friends.

Find My Network will help you find your belongings when they are left far behind, like at the beach or gym. As long as iOS device users allow Find My network access, TagMe will send out a secure Bluetooth signal that can be detected by nearby iOS devices in Find My network, these devices send the location of your MyTag device to iCloud, then you can go to the Find My app and see it on the map. The whole process is anonymous and encrypted to protect your privacy. And it’s efficient, so there is no need to worry about the battery life and data usage.

2.4 Lost Mode – Find things easier

Just like other Apple devices, TagMe can be put into Lost Mode. You’ll automatically get a notification when it’s detected by other devices in the Find My network. You can activate Lost Mode in Find My app by following the onscreen instructions, adding your phone number or email account. So if others pick up your TagMe, they can know more info about it and know how to contact you by following the learning more page instruction in Find My app .

2.5 Prevent unwanted tracking

To prevent unwanted tracking, when someone else’s TagMe device is mixed into your belongings, your Apple device will find it and send you an alert notification. If you haven’t found this device after a while, it will play a sound so you can find it. But don’t worry, if someone next to you wearing a TagMe device, as long as the device does not leave the owner, you will not receive a notification.

2.6 Privacy protection

Only you can see where your TagMe is. No location data or location history is physically stored inside TagMe. Communication with the Find My network is end-to-end encrypted so that only the owner of a device has access to its location data, and no one, including Apple, knows the identity or location of any device that helped find it.

Documents / Resources

Spigen Find My App [pdf] Instructions
2AFKN-TAGME, 2AFKNTAGME, Find My, Find My App

References

User Manual

1. Add TagMe to Find MyAdd other item

1.1 Add TagMe with factory settings state

1.2 Add TagMe in other state