SmartDHOME 01335-1455-00 Switch and Measuring socket with Shuko Plug logo

SmartDHOME 01335-1455-00 Switch and Measuring socket with Shuko PlugSmartDHOME 01335-1455-00 Switch and Measuring socket with Shuko Plug pro

Switch and Measure socket with Shuko Plug

Technical Note P/N 01335-1455-00 – rev. 1 28/12/2020 Compatible with the MyVirtuoso Home smart home system and with all systems that communicate via the Z-Wave wireless network, the Actuator and Measurement Socket with Schuko plug has the ability to activate/deactivate connected appliances and detect their consumption in real time. It can be connected to the 230 Vac mains and is able to supply a current of 13 A for a total of 3,000 W. SmartDHOME 01335-1455-00 Switch and Measuring socket with Shuko Plug fig 1

Features

  • Protocol: Z-Wave.
  • Power supply: 110-230 VAC, 50/60 Hz, 13 ° (protection against overload). Operating temperature: 0-60 ° C.
  • Wireless range: about 30m.
  • Protection: IP21.
  • Dimensions: 43 x 65 mm.
  • Wireless certification: Z-Wave Plus.

SmartDHOME Srl V.le Longarone 35, 20058 Zibido San Giacomo (MI) info@smartdhome.com Rev. 12/2020

Documents / Resources

SmartDHOME 01335-1455-00 Switch and Measuring socket with Shuko Plug [pdf] Instructions
01335-1455-00 Switch and Measuring socket with Shuko Plug, 01335-1455-00, Switch and Measuring socket with Shuko Plug

References

Leave a comment

Your email address will not be published. Required fields are marked *