EC25-AUX FlyToLink USB Switch
“
Specifications:
- Model Name: EC20/EC25
- Frequency Band: 1/8/3/7/20/28
- Dimension: 80.45*42*13.5mm
- Weight: 27g
- Color: Gray
- Operation Voltage: 5V
- Maximum Output Power: 10W
- Manufacturer: Huizhou Skyline Intelligent
Technology Co., Ltd. - Accessory: Type C USB LED, HUB optional
- Operating Temp: -0 to +40°C (for indoor use
only)
Product Usage Instructions:
Inserting SIM Card and Connecting to Computer:
- Ensure the product nameplate is facing downward.
- Align the card’s metal contact points with the SIM card’s PIN
connectors. - Gently insert the SIM card into the 4G Dongle until fully
seated. - Insert the USB connector into a computer or USB hub port.
Installing 4G Module Driver:
- Confirm that the 4G module, antenna, and SIM card are
inserted. - Download the driver and run setup.exe to install.
- Follow on-screen instructions for driver installation.
Virtual Network Card Dial-Up Online:
- In Windows OS, click on the network connection icon in the
taskbar. - Select the SIM card operator and click Connect.
- If required, enter dial-up parameters and continue.
- Select options as needed in the Automatic Connection Settings
window to complete the process.
Frequently Asked Questions (FAQ):
Q: How do I know if the network connection is established
successfully?
A: When the red light is steady on and the blue light is
flashing continuously, it indicates a successful network connection
status.
Q: What should I do if the driver installation fails?
A: Ensure that all prerequisites are met, such as inserting the
4G module correctly and following the installation steps
accurately. If issues persist, contact customer support for
assistance.
“`
EC20/EC25 Connect to Internet Simple Operation Manual
Make sure the switch is in the position of “USB”
Model Name Frequency Band Dimension Weight Color Operation Voltage maximum out put power Manufactory
Accessory Type C USB LED
Operating Temp
EC25-AUX
1/8/3/7/20/28
80.45*42*13.5mm
27g
Gray
5V
10W Huizhou Skyline Intelligent Technology Co., Ltd. HUB optional
None LED Power and Signal LED Indicators -0 to +40: -0 to +35 (for indoor use only): XOther: Min.:-40 to Max.:70
Network Card LED Status 1.No Card Inserted, Power-On StateRed LED Steady OnBlue LED Steady On
2.Power-On and Card InsertedNetwork Searching StateRed LED Steady On Blue LED Steady On
3.Power-On and Card InsertedSuccessful Network Connection StatusRed light is steady onblue light is flashing continuously
Usag e
step s
Ensure the product nameplate is facing
downward
Align the card’s metal contact points with the SIM card’s PIN connectors
Gently insert the SIM card into the 4G Dongle until fully seated
Insert the USB connector into a computer or USB hub
port
Install 4G module driver
1. Before installing the 4G module driver, please confirm that the 4G module has been inserted on the PC USB, and the antenna and SIM card have been inserted. 2. Download the driver, and click the “setup.exe” file to install the driver. 3. After clicking the setup.exe file, the driver installation window will pop up, as shown in image1:
image1 Do not change the installation path and click “Next” to install. 4. After the Image2 window appears, continue to click “Next” to install
image2 When the window as shown in image3 appears, make sure to check the options in the red box, that is, to choose to always trust, otherwise it will cause the driver installation to fail.
image3
5. When the window shows the image of image4, it means that the driver has been installed. Click the “Finish” button to exit the installation 4G module driver installation interface
image4
Virtual network card dial -up online
In the Windows operating system, there are two commonly used dial -up methods, one is the virtual network card dial -up online, and the other is to use the dial -up software that comes with Windows to create a MODEM dial up connection. Briefly introduce the use of virtual network card dial -up Internet access
1. Move the mouse to the network connection icon display area in the lower right corner of the Windows taskbar. Click the network connection icon to appear the window as shown in Image5
image5 2. Move the mouse to the ” ” (SIM card operator) that appeared in image6, and click “Connect”.
image6
3. For the first time to using, the window as shown in image7 may appear (Most operators’ SIM cards already have the default data, and will not jump out of this window)
image7 If this window appears, enter the corresponding dial -up parameters of the SIM card operator, as shown in Image8
image8 As shown in Image8, after entering the parameters, click “Continue” to perform the next step
4. At this time, a window of “Automatic Connection Settings” will pop up, as shown in image9, please select the corresponding options according to actual needs, and then click “Continue” to complete all operations of the virtual network card dial -up online access to the Internet.
image9 Note: Because some data cards are divided into different fees from roaming and non -roaming, it is recommended to choose “Connect automatically except when roaming”
FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC SAR statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating instructions for
satisfying RF exposure compliance.
The device is designed to meet the requirements for
exposure to radio waves established by the Federal Communications
Commission (USA). These requirements set a SAR limit of 1.6 W/kg
averaged over one gram of tissue. The highest SAR value reported under
this standard during product certification for use when properly worn on the body is
0.878 W/kg
Documents / Resources
 |
SKYLINE EC25-AUX FlyToLink USB Switch [pdf] Instruction Manual EC25-AUX, EC25-AUX FlyToLink USB Switch, FlyToLink USB Switch, USB Switch, Switch |