SAPPHIRE TB51 Flexi Pipe Adapter
Product Specifications
- Product Name: TB51 Flexi Pipe Adapter – 3/8 tubing
- Compatibility: Sapphire SL33 or SL33-D
- Connection: Cold water supply via braided hose
- Thread Size: 3/8 tubing
Product Usage Instructions
- Installation Process:
- Use plumbers’ tape on all the threads as you assemble the connector.
- Screw valve with blue handle into the flexi pipe connector.
- Screw the connector to the flexi pipe cold water line at both] ends.
- Place small nut over white 1/4 tubing and push tubing over the] valve’s nozzle. Tighten the nut to secure the tube.
- Adjust water flow rate with handle to 2L/min.
- Approx. 4L/min = full turn
- Approx. 2L/min = half turn
- Adjust the flow rate to 2L per min using the red handle.
For more information, visit sapphirewater.co.nz
Frequently Asked Questions (FAQ)
Q: Can the TB51 Flexi Pipe Adapter be used with other water filtration systems?
A: The TB51 Flexi Pipe Adapter is specifically designed for use with Sapphire SL33 or SL33-D systems and may not be compatible with other systems. It is recommended to check compatibility before use.
TB51 Flexi Pipe Adapter – 3/8″ tubing
The new TB51 is used in place of the S46 Saddle tapping valve to connect your Sapphire SL33 or SL33-D to the cold water supply via braided hose.
Installation Process
- Use plumbers tape on all the threads as you assemble the connector.
- Screw valve with blue handle into the flexi pipe connector.
- Screw the connector to the flexi pipe cold water line at both ends.
- Place small nut over white 1/4″ tubing and push tubing over the valves nozzle. Tighten the nut to secure the tube.
- Adjust water flow rate with handle to 2L/min.
- Approx. 4L/min = full turn
- Approx. 2L/min = half turn
For more information, visit sapphirewater.co.nz
Documents / Resources
 |
SAPPHIRE TB51 Flexi Pipe Adapter [pdf] Installation Guide TB51, TB51 Flexi Pipe Adapter, Flexi Pipe Adapter, Pipe Adapter, Adapter |
