6F Loop Activity Tracker
“
Specifications
- Operates at 2.402 – 2.480 GHz ISM frequency band(s)
- Maximum power: 5.0 mW
- Model: 6F
- Manufactured by Polar Electro Oy
- Email: customercare@polar.com
- Website: www.polar.com
- Language: EN
- Valid Until: 06/2025
Product Usage Instructions
1. Attach and Adjust the Wristband
- With fasteners facing up, thread the wristband through the
device slots. - Attach the buckle to the wristband loop.
- Adjust for a snug, comfortable fit and secure with the
fasteners.
2. Download Polar Flow App
Ensure Bluetooth and internet are ON. Download the Polar Flow
app from the App Store or Google Play. Sign in or create a new
Polar account.
3. Charge
The Polar Loop turns on when plugged in for charging. LED
indicators show charging progress, and red LEDs remain continuously
on when fully charged.
4. Setup
Plug in the Polar Loop to charge and open the Flow app for
setup. Follow on-screen instructions for pairing and setup.
5. Wear
Position the device correctly with the oval mark facing the
thumb side of your wrist. Wear it firmly against your skin on the
selected wrist for accurate readings.
6. Use with Polar Flow
Polar Loop automatically tracks heart rate, sleep, activity, and
training sessions. Sync data with the Flow app every half hour when
in Bluetooth range.
Keep the device and wristband clean by washing them regularly
with mild soap and water. Allow them to dry completely before
wearing again.
For more information on materials and technical specifications,
refer to the user manual at support.polar.com/en/polar-loop.
FAQ
Need Help?
Visit support.polar.com/en/polar-loop
for detailed user manuals, support videos, and troubleshooting
guidance. Contact support via chat or email.
Learn more at support.polar.com/en/polar-loop.
Compatible with:
Model: 6F | Manufactured by Polar Electro Oy | Email:
customercare@polar.com | Website: www.polar.com
“`
Polar Loop
Getting Started Guide
1 Attach and adjust the wristband A.
B.
1 2
C.
A. With fasteners facing up, thread the wristband through the device slots.
B. Attach the buckle to the wristband loop. C. Adjust for a snug, comfortable fit and secure
with the fasteners.
2 Download Polar Flow app
Bluetooth ON
Internet ON
Download Polar Flow app from App Store or Google Play Sign into your Polar account or create a new one
3 Charge
The Polar Loop turns on when you plug it in to charge. While charging, the LEDs indicate progress: clockwise rotating red LEDs show that charging is in progress, and when the battery is fully charged, the red LEDs remain continuously on.
4 Setup
After plugging in your Polar Loop to charge, open the Flow app to start the setup. The Flow app will automatically discover Polar Loop and guide you through the setup. Keep your Polar Loop close to your phone during the pairing and setup.
Note that you have to do the pairing in the Polar Flow app, not in your phone’s Bluetooth settings.
5 Wear
For accurate measurement, it’s important that the device is positioned correctly: the side with the oval mark should face the thumb side of your wrist. Wear Polar Loop around your wrist so that the optical heart rate sensor is firmly against your skin. Make sure you wear the device on the wrist you selected in the Flow app device settings.
6 Use with Polar Flow
The Polar Loop automatically tracks your heart rate, sleep, activity, and training sessions when worn. It syncs data with the Flow app automatically every half hour if your phone is within Bluetooth range.
In the Flow app, you can view detailed analyses of your training, activity, and sleep data. You can also, for example:
· Manually start a training session · Sync data manually · Turn automatic training detection on or off and
adjust its sensitivity · Adjust device settings, check battery status, and
turn off the device · Receive firmware updates
Keep the device and wristband clean: wash them regularly (at least once a week) with a mild soap solution. Rinse thoroughly with water and allow them to dry completely before wearing them again.
Information about materials and technical specifications are available in the user manual at support.polar.com/en/ polar-loop.
The radio equipment operates 2.402 – 2.480 GHz ISM frequency band(s) and 5.0 mW maximum power. App Store is a service mark of Apple inc. Google Play is a trademark of Google Inc.
Need help?
Visit support.polar.com/en/polar-loop to access more detailed user manuals, support videos and troubleshooting guidance. Contact us by chat or email.
Learn more at support.polar.com/en/polar-loop
Compatible with
Model: 6F Manufactured by Polar Electro Oy customercare@polar.com www.polar.com EN 06/2025
Documents / Resources
 |
POLAR 6F Loop Activity Tracker [pdf] User Guide 6F Loop Activity Tracker, 6F, Loop Activity Tracker, Activity Tracker, Tracker |