T1E1 Mine Exploder
Product Information
Specifications
- Model: T1E1 Mine Exploder
- Compatibility: For Italeri Sherman tank kit
- Usage: Clearing mines from occupied territories
- Used by: American army during World War II
- Mounting: On the M32 recovery version of the Sherman tank
Product Usage Instructions
Assembly Instructions
1. Refer to the instruction drawings for the assembly
process.
2. Ensure all parts are correctly aligned and securely
attached.
Safety Precautions
1. When working with metal parts, use eye protection to prevent
injuries.
2. Be cautious of dust produced during machining, which may
irritate the respiratory tract.
3. Cut metal parts carefully to avoid sharp edges.
Cleaning and Maintenance
1. Regularly clean the mine exploder to remove any dirt or
debris that may affect its performance.
2. Store the device in a dry and safe place when not in use to
prevent damage.
Usage Guidelines
1. Mount the T1E1 mine exploder securely on the designated area
of the M32 recovery version of the Sherman tank.
2. Operate the device according to the provided instructions for
safe and effective mine clearance.
Frequently Asked Questions (FAQ)
Q: Can this mine exploder be used with other tank models?
A: The T1E1 mine exploder is specifically designed for use with
the Italeri Sherman tank kit and may not be compatible with other
models.
Q: How often should I inspect the device for maintenance?
A: It is recommended to inspect and maintain the mine exploder
regularly, especially after each use, to ensure its proper
functioning.
Q: Is there a warranty for this product?
A: Warranty terms may vary based on the place of purchase.
Please refer to the seller or manufacturer for warranty
information.
599
1/35
T1E1 Mine exploder for Sherman
for Italeri kit
Odminovac T1E1 pouzívala americká armáda k odminování obsazeného území bhem druhé sv. války. Zaízení se montovalo na vyprosovací tank Sherman verze M32
The T1E1 mine exploder was used by the American army to clear mines from occupied territories during World War II. The device was mounted on the M32 recovery version of the Sherman tank.
Návod ke stavb
Pi stavb postupujte podle instruktázních obrázk.
Instructions
Follow the instruction drawings the assembly.
Upozornní: Bhem opracování mze vznikat prach, který mze drázdit dýchací cesty. Pouzívejte ochranu ocí pi odstihování kovových díl.
Notice: Machining can produce dust witch can be irritating to the respiratory tract. Metal parts should be cut off using protection eyesight.
Plus Model s.r.o. Prazská 493/56 370 10 Ceské Budjovice Czech Republic http://www.plusmodel.cz e-mail: plusmodel@plusmodel.cz
Buy direct from www.plusmodel.cz
1
2
13
15
3
4
18
Díl c.13 nalepte z obou stran Glue part no. 13 on both sides
4
3
7
6
1
2
5
19 20 6 12
14 11
21
8 21
20
7
M1 20
10 9
M2
17
21
Documents / Resources
 |
plusmodel T1E1 Mine Exploder [pdf] Instruction Manual 599, T1E1 Mine Exploder, Mine Exploder, Exploder |