Paxton APN-1072-AE Net2 Software7

PRODUCT USING INSTRUCTION

Setting up the Net2 software

The following guide provides an overview of the steps required to configure a Net2 installation listed in the best order in which they should be performed. Detailed application notes are also provided.

• Doors
  • The first section to configure when setting up a new Net2 system is Doors. Readers must be configured before areas, access levels, and other sections can be set up.
    • AN1046 – Configuring readers and keypads
• Areas
  • ‘Areas’ is a feature of Net2 Professional. If anti-passback or roll call reporting is to be used, areas and area groups need to be set up. If not, skip to creating Timezones.
    • • AN1023 – Configuring areas and area groups.
• Timezones
  • Timezones are different times of the day and week when access will be permitted. These should be created/edited before access levels can be fully utilized.
    • AN1038 – Using Access Levels and Timezones
• Access levels
  • Access levels control where in a building a user is allowed and during what times.
    • AN1038 – Using Access Levels and Timezones
• Departments
  • Departments allow users to be grouped enabling quick reporting and viewing of users.
    • AN1041 – Using Departments.
• Users
  • ‘Users’ are people that use the access control system. Users are identified to the system by a card, token, or PIN (or a combination of any of these). Once a user has been identified to the system, a decision can be made on whether they are permitted or denied access.
    • AN1039 – Adding a new user.
• Operators
  • ‘Operators’ are users that require access to the Net2 software.
    • AN1073 – Net2 operators – Adding / Assign privileges.
• Fire Alarm Integration
  • Fire alarm integration is a feature of Net2 Professional only.
    • AN1031 – Integrating Net2 with a fire alarm system.
• Roll call and muster reporting
  • Roll call and muster reporting is a feature of Net2 Professional and can be used in conjunction with the fire door unlock feature.
    • AN1032 – Using roll call and muster reports
• Anti-passback
  • Anti-passback is a feature of Net2 Professional that enhances the security of a site.
    • AN1063 – Configuring anti-passback
• Intruder alarm integration
  • Net2 can be integrated with an intruder alarm to arm and disarm the system using the access control readers.
    • AN1035 – Integrating Net2 with an intruder alarm system
• I/O Boards
  • I/O boards can be added to a Net2 system and used for any number of different applications. The boards need to be configured and can then be used in conjunction with Triggers and Actions.
    • AN1066 – Installing an I/O board
• Triggers and Actions
  • ‘Triggers and Actions’ is a powerful feature, used in conjunction with I/O boards, allowing Net2 to automatically control various systems around a building.
    • AN1067 – Using Triggers and Actions
    • AN1079 – Lighting control using Triggers and Actions
    • AN1080 – Economic control of air conditioning using Triggers and Actions
• Site Graphics
  • Site Graphics provide a visual representation of the site, allowing operators to monitor events around the site at a glance.
    • AN1064 – Using Site Graphics
• Cameras
  • ‘Cameras’ is a feature that allows you to view live images from IP addressable cameras from within Net2.
    •  AN1052 – Integrating IP Cameras with Net2
• Camera Images Integrated with Net2 Events
  • Net2 allows integration with camera software to provide digital images to be associated with an event. The camera software needs to be configured before integration with Net2 can take place.
    • AN1053 – Integrating Net2 with Milestone software
    • AN1083 – Integrating Net2 with OnSSI software
    • AN1084 – Integrating Net2 with the JVC NVR
    • AN1093 – Integrating Net2 with Dedicated Micros software
    • AN1108 – Integrating Net2 with Pelco software
• Timesheet
  • Net2 can provide basic time and attendance reporting when used with the Net2 Events table. Users, Departments, and Operators will automatically appear in the Timesheet programs.
    •  AN1029 – Using Net2 Timesheet
    • AN1098 – Using Net2 Timeline

Documents / Resources

Paxton APN-1072-AE Net2 Software [pdf] Owner's Manual AN1046, AN1023, AN1038, AN1041, AN1039, AN1073, AN1031, AN1032, AN1063, AN1035, APN-1072-AE Net2 Software, APN-1072-AE, Net2 Software, Software

References

• User Manual