snn SMPS07 Sensor with Clamp in Valves
“
Product Specifications:
- Product: Sensor with clamp-in valves
- Manufacturer: Siming
- Recommended Accessories: Siming’s valves and accessories
- Torque for screw-nut: 4.0 Nm
Product Usage Instructions:
Installation:
- Put down the screw nut.
- Slide the valve stem through the valve hole of the rim.
- Tighten the screw-nut with 4.0 Nm using the Torque tool.
- Assemble the tire, ensuring that the sensor does not touch the
rim and tire.
Note: Use different methods to re-learn based
on the specific vehicle model.
Contact Information:
US: SIMING TIRE SUPPLY INC. 50164 Pontiac Trail
Unit #3 Wixom, MI 48393
Tel: 248.884.5881
Email: eri.muca@simingglobal.com
Web: www.siming-china.com
China: Ningbo Siming Automotive Co.,Ltd 360#
Qiushi Road, Wangchun Industry park, Ningbo, China
Tel: +86 574-87103699
E-mail: info@siming-china.com
Web: www.siming-china.com
FAQ:
Q: Can I use any valves and accessories with this sensor?
A: It is recommended to use Siming’s valves and accessories to
ensure optimal function of the sensor.
Q: What should I do if the sensor touches the rim or tire
during installation?
A: Ensure that the sensor does not come in contact with the rim
or tire to prevent any damage or interference with its
function.
“`
Sensor with clamp-in valves + Installation instructions
Caution
1. Please make sure to use Siming’s valves and accessories to guarantee optimal function.
2.Please follow the instruction of car manufacturer for the safety and correct operation.
1.
2.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ·Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ·Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Step 3
www.tpms-sensor.com
Installation
1.Put down the screw nut; 2.Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the Torque tool. 3.Assemble the tire, be sure that sensor would not touched with the rim and tire.
Note: Use different way to re-lean according to the different vehicle.
1.
2.
4.0Nm
3.
US: SIMING TIRE SUPPLY INC. 50164 Pontiac Trail Unit #3 Wixom, MI 48393 Tel: 248.884.5881 Email: eri.muca@simingglobal.com Web: www.siming-china.com
China: Ningbo Siming Automotive Co.,Ltd 360# Qiushi Road, Wangchun Industry park, Ningbo, China Tel: +86 574-87103699 E-mail: info@siming-china.com Web: www.siming-china.com
Documents / Resources
 |
ONE DIRECT SENSOR snn SMPS07 Sensor with Clamp in Valves [pdf] Installation Guide SMPS07, 2A82G-SMPS07, 2A82GSMPS07, snn SMPS07 Sensor with Clamp in Valves, snn SMPS07, Sensor with Clamp in Valves, Clamp in Valves, Valves, Sensor |