NEEWER GC30C Inflatable Light

Product Specifications

• Inflatable light with magnetic mount and 1/4 thread for light stand connection
• Features bi-colour mode and 17 special scenes
• Power options include Type-C charging-only mode or charge/discharge mode
• Includes hue (H), saturation (S), and intensity (I) adjustment in HSI mode

Product Usage Instructions

Inflation and Powering On

1. Inflate the product using an air pump or by exhaling into the valve.
2. Ensure the product is fully charged and discharged before recharging.
3. Press and hold the power button for 3 seconds to power on/off.

Brightness and Colour Temperature Adjustment

• Up/Brightness + Button: Increase brightness by 1% increment or press and hold for continuous increase.
• Down/Brightness – Button: Decrease brightness by 1% increment or press and hold for continuous decrease.
• Right/Colour Temperature + Button: Increase colour temperature by 1% or press and hold for continuous increase.
• Left/Colour Temperature – Button: Decrease colour temperature by 1% or press and hold for continuous decrease.

Special Scenes and Modes Selection

1. Double-press the power button for scene selection.
2. Use the left, right, and power buttons to choose between bi-colour scenes, special scenes, and HSI scenes.
3. Triple-press to enter HSI mode for hue, saturation, and intensity adjustments.

Miscellaneous Usage Notes

• Avoid disassembly, unauthorised modifications, or use of non-original chargers.
• Do not place near flammable materials or expose to corrosive fluids.
• Avoid high-temperature, high-humidity environments and sharp objects.
• Store the product in a cool place after use to prevent damage.

Package Contents

Product Illustration

1. Power button:
   1. Short press to activate. Press and hold for 3 seconds to power on; repeat to power off.
   2. When powered on, double-press for scene selection. Use the left, right, and power buttons to select bi-colour scenes, 17 special scenes, and HSI scenes.
   3. In bi-colour mode, short press to cycle through brightness levels: 0% – 25% – 50% – 75% – 100% – 0%.
   4. In scene selection mode, short-press the up or down button to enter charge/discharge selection. Then, press the left or right button to choose between Type-C charging-only mode or charge/discharge mode.
   5. Triple-press to enter HSI mode. Use the up and down buttons to select hue (H), saturation (S), and intensity (I), then use the left and right buttons to adjust values.
      • In this mode, double-press the power button to return to scene selection.
2. Up/Brightness + Button:
   • In bi-colour mode, press once to increase brightness by 1% increment, press and hold to increase continuously.
3. Down/Brightness – Button:
   • Press once to decrease brightness by 1% increment, press and hold to decrease continuously.
4. Right/Color Temperature + Button:
   • In bi-colour mode, press once to increase colour temperature by 1%. Press and hold to increase continuously.
5. Left/Colour Temperature – Button：
   • In bi-colour mode, press once to decrease colour temperature by 1%. Press and hold to decrease continuously.

Instructions for Use

1. Inflate before powering on. Inflate by exhaling into the valve or by using a manual or electric air pump (sold separately);
2. When used for the first time, the product should be completely charged and discharged before recharging.
3. The inflatable light features a magnetic mount and a 1/4″ thread for light stand connection;
4. Can be suspended.

Instructions for Use

Special Scenes

Battery Alerts

1. Do not disassemble, modify, or repair the built-in battery. Any unauthorised modification may result in battery leakage, overheating, fire, or explosion.
2. Do not use a non-original or uncertified charger to charge the product to prevent overcharging, short circuits, or other hazards.
3. If abnormal charging speed or unusual blinking of the indicator are observed, please stop using the product immediately and contact our after-sales service for assistance.
4. Do not place the product near flammable or explosive materials.

Notes

1. Before turning on the light, please inflate it to prevent the TPU exterior from coming into contact with and being damaged by the heat from the LEDs.
2. The tube light contains an inflatable airbag. Do not let it touch sharp objects or expose it to corrosive fluids or gases. Avoid using it in high-temperature, high-humidity environments, and do not squeeze or drop it from high places to prevent damage.
3. Do not store the product while it is still hot to prevent the material from melting and sticking together.

Specifications

• Model GC30C
• Product Size (Uninflated) Approx. 0.9m x 0.12m
• Power 30W 30W
• Type C Input DC 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A
• Type C Output 30W
• Battery Capacity 7.2V 5000mAh 36Wh
• Colour Rendering Index 95
• Weight 377g
• Colour Temperature 2700-6500K
• Maximum Illuminance 3000lux/0.5m
• Number of Scenes 17
• Hue Angles 0°-359°
• Saturation 0%-100%
• Intensity 0%-100%
• Full Power Runtime Approx. 70 minutes

Frequently Asked Questions

• Q: What should I do if the indicator blinks unusually during charging?
  • A: Stop using the product immediately and contact our after-sales service for assistance.
• Q: Can I use any air pump to inflate the product?
  • A: Yes, you can use a manual or electric air pump to inflate the product.
• Q: How do I select different special scenes?
  • A: Double-press the power button to enter scene selection mode, then use the buttons to navigate through special scenes.

Documents / Resources

NEEWER GC30C Inflatable Light [pdf] Instruction Manual GC30C, GC30C Inflatable Light, Inflatable Light, Light

References

• User Manual