MOXA MPC-3000 Series Panel Computers Installation Guide

MPC-3000 Series Panel Computers

Product Information

Specifications

  • Model: MPC-3000 Series
  • Version: 1.0, July 2024
  • Manufacturer: Moxa Inc.
  • Power Input: DC 12/24 V
  • Display-control Buttons: Power, Brightness+
  • Serial Ports: 2 RS-232/422/485 ports
  • Ethernet Ports: 2 Fast Ethernet 10/100/1000 Mbps RJ45
    ports

Product Usage Instructions

Display-control Buttons Usage

The MPC-3000 comes with three display-control buttons: Power and
Brightness +/-.

Power Button:

Power: Press once to power on or enter sleep
mode; press and hold for 4 seconds to power off or wake up.

Brightness Buttons:

Brightness +: Press to increase brightness.

Brightness -: Press to decrease brightness.

Hardware Installation

Panel Mounting

Ensure all installations are done by skilled persons to prevent
equipment damage.

Use the provided panel-mounting kit and follow the dimension
tolerance guidelines for secure installation.

VESA Mounting (optional)

VESA mounting is available for non-marine applications. Use four
10-mm M4 screws for installation.

Connector Descriptions

DC Power Input: Connect the 2-pin terminal
block with a 60-W power adapter using 12-18 AWG wire. Nominal
voltage is 12/24 VDC.

Serial Ports: The MPC-3000 offers two
software-selectable RS-232/422/485 serial ports with specific pin
assignments.

Ethernet Ports: The device has two Fast
Ethernet RJ45 ports with specific pin assignments for
connectivity.

Frequently Asked Questions (FAQ)

Q: Can I modify the function of the Power button?

A: Yes, you can modify the function of the Power button in the
OS settings menu.

Q: What is the required wire size for the DC Power Input?

A: Use 12-18 AWG wire type Cu for the DC Power Input.

“`

MPC-3000 Series Quick Installation Guide
Version 1.0, July 2024
Technical Support Contact Information www.moxa.com/support
2024 Moxa Inc. All rights reserved. P/N: 1802030001010 *1802030001010*

Overview
The MPC-3000 Series panel computers with dual-core x6211E or quadcore x6425E processor deliver a reliable, durable, and versatile platform for use in industrial environments. With two software selectable RS-232/422/485 serial ports and two Gigabit Ethernet ports, the MPC-3000 Series panel computers support a wide variety of serial interfaces as well as high-speed IT communications, all with native network redundancy. Both regular and wide-screen models are available to meeting the display needs of various field applications.
Package Checklist
Before installing the MPC-3000, verify that the package contains the following items: · 1 MPC-3000 Series panel computer · 1 2-pin terminal block for DC power input · 1 10-pin terminal block for DIO · 1 2-pin terminal block for remote power switch · Panel-mounting kit · Quick installation guide (printed) · Warranty card NOTE: Please notify your sales representative if any of the above items are missing or damaged.
Appearance MPC-3070W
– 2 –

MPC-3100 MPC-3120 MPC-3120W
– 3 –

MPC-3150
MPC-3150W
Dimensions MPC-3070W
– 4 –

MPC-3100 MPC-3120 MPC-3120W
– 5 –

MPC-3150
MPC-3150W
Display-control Buttons
The MPC-3000 is provided with three display-control buttons on the right panel.
– 6 –

The display-control buttons can be used as described in the following table:

Symbol and Name Usage

Power

Press
Press and hold for 4 seconds

Function Power on OR Enter sleep or hibernation mode OR Wake up
NOTE: You can modify the function of the Power button in the OS settings menu
Power off

Brightness + Press

Manually increase the brightness of the panel

Brightness – Press

Manually decrease the brightness of the panel

Hardware Installation

ATTENTION
All the installations must be installed by skilled persons to avoid any equipment damage.
Panel Mounting
A panel-mounting kit consisting of 6 (MPC-3070W), 7 (MPC-3100), 10 (MPC-3120/3120W), 11 (MPC-3150W) or 12 (MPC-3150) mounting clamps is provided in the MPC-3000 package. Details on the dimension tolerance and the cabinet space required to panel mount the MPC-3000 are illustrated in the following sections:

– 7 –

To install the panel-mounting kit on the MPC-3000, insert the mounting clamps in the mounting holes provided on the rear panel and slide the clamps to the ends of the panel as shown in the following figures:
Use a torque of 5 kgf-cm to secure the mounting screws to fasten the panel-mounting kit onto the wall.
Ensure that there is adequate space behind the panel for ventilation, and that the panel material and thickness can support the weight of the device.
– 8 –

VESA Mounting (optional)

ATTENTION
VESA mounting is not applicable to the marine applications.

The MPC-3000 is provided with VESA-mounting holes on the back panel, which you can use directly without the need for an adapter. The dimensions of the VESA mounting area are 75 mm x 75 mm. You will require four 10-mm M4 screws to VESA mount the MPC-3000.

The VESA mounting installation directions are shown below.

MPC-3070W

MPC-3100

MPC-3120

MPC-3120W

– 9 –

MPC-3150

MPC-3150W

Connector Descriptions

DC Power Input

The MPC-3000 uses a DC power input.

The DC pin assignments are shown in the

figure. To connect the power source to

the 2-pin terminal block, use the 60-W

power adapter. The terminal block is

available in the accessories package. The

required wire size is 12-18 AWG (wire

type: Cu) and the torque value 0.5 N-m

(4.425 lb-in) should be applied.

Nominal Voltage:12/24 VDC

Serial Ports

The MPC-3000 offers two software-selectable RS-232/422/485 serial ports over a DB9 connector. The pin assignments for the ports are shown in the following table:

Pin RS-232 RS-422

1

DCD

TxDA(-)

2

RxD TxDB(+)

3

TxD RxDB(+)

4

DTR

RxDA(-)

5

GND

GND

6

DSR

­

7

RTS

­

8

CTS

­

RS-485 (4-wire) TxDA(-) TxDB(+) RxDB(+) RxDA(-)
GND ­ ­ ­

RS-485 (2-wire)
­ ­ DataB(+) DataA(-) GND ­ ­ ­

– 10 –

Ethernet Ports

The pin assignments for the two Fast Ethernet 10/100/1000 Mbps RJ45 ports are shown in the following table:

Pin 10/100 Mbps

1

ETx+

2

ETx-

3

ERx+

4

­

5

­

6

ERx-

7

­

8

­

1000 Mbps TRD(0)+ TRD(0)TRD(1)+ TRD(2)+ TRD(2)TRD(1)TRD(3)+ TRD(3)-

The LEDs on the LAN ports indicate the following:

LAN 1/LAN 2 (indicators on the connectors)

Green Yellow Off

100 Mbps Ethernet mode 1000 Mbps Gigabit Ethernet mode No activity / 10 Mbps Ethernet mode

USB Ports

Two USB 3.0 ports are available on the bottom panel. Use these ports to connect mass-storage drives and other peripherals.

DIO Port
The MPC-3000 is provided with a DIO port, which is a 10-pin terminal block that includes 4 DIs and 4 DOs as illustrated in the following figure.
DIO Voltage: 30 VDC

DO Output: 100 mA (single port)

DIO terminal block (plug matched with socket) with wire size 30 and torque value 0.5 N-m (4.425 lb-in)

– 11 –

Installing a CFast or SD Card

MPC-3000 provides two storage options–CFast and SD card. The storage slots are located on the right panel. You can install the OS on the CFast card and save your data into the SD card. For a list of compatible CFast models, check the MPC-3000 component compatibility report available on Moxa’s website.

To install the storage devices, do the following:

1. Remove the 2 screws holding the storage-slot cover to the MPC-3000.

2. Insert a CFast or SD card into the slot using the pushpush mechanism.

3. Reattach the cover and secure it with screws.
Real-time Clock
The real-time clock (RTC) is powered by a lithium battery. We strongly recommend that you do not replace the lithium battery without help from a qualified Moxa support engineer. If you need to change the battery, contact the Moxa RMA service team. The contact details are available at: http://www.moxa.com/rma/about_rma.aspx.
ATTENTION
There is a risk of explosion if the clock’s lithium battery is replaced with an incompatible battery. Dispose of used batteries according to the Instructions.
Powering On/Off the MPC-3000
Connect a Terminal Block to Power Jack Converter to the MPC3000 terminal block and connect a 60 W power adapter to the converter. Supply power through the power adapter. After you have connected a power source, the system Power button turns on automatically. It takes about 10 to 30 seconds for the system to boot up. You can change the power-on behavior of your computer by changing the BIOS settings. To power off the MPC-3000, we recommend using the “shut down” function provided by the OS installed on the MPC. If you use the Power button, you may enter one of the following states depending on the power management settings in the OS: standby, hibernation, or system shutdown mode. If you encounter problems, you can press and hold the Power button for 4 seconds to force a hard shutdown of the system.
– 12 –

Grounding the MPC-3000
Proper grounding and wire routing help to limit the effects of noise from electromagnetic interference (EMI). Run the ground connection from the ground screw to the grounding surface prior to connecting the power source. The minimum cross-sectional area required for the protective earthing conductor is 3.31 mm². A mandatory external bonding facility with a cross-sectional area of at least 4 mm² must be installed for effective conductivity.
ATTENTION
This equipment is intended to be supplied by the external power source, which is evaluated according to UL/EN/IEC 62368-1 or UL/IEC 60950-1. The power source shall comply with ES1/SELV and LPS requirements, output rating is 12 VDC, 5.6 A (min.) or 24 VDC, 2.8 A (min.), and an ambient temperature of 60°C minimum. If you are using a Class I adapter, the power cord should be connected to an outlet with an earthing connection.
– 13 –

Documents / Resources

MOXA MPC-3000 Series Panel Computers [pdf] Installation Guide
MPC-3070W, MPC-3100, MPC-3120, MPC-3120W, MPC-3150, MPC-3150W, MPC-3000 Series Panel Computers, MPC-3000 Series, Panel Computers, Computers

References

Leave a comment

Your email address will not be published. Required fields are marked *