MONOCLONIUS UCX24-E008 Speed Control and Receiver
Product Information
Easily add accessory tailights, reverse lights, turn lights, and more by simply instaing the LED light kit (purchased separately) and plugging it into the small box. The lighting control function, speed control and signal reception are already built in the box (ESR), this is an innovative electronic device.
Please read the following instructions before installing and operating your ESR.
SAFETY PRECAUTIONS
This product is a sophisticated hobby product and not a toy. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this product in a safe and responsible manner could result in injury or damage to the product or property. This product is not intended to be used by children without direct adult supervision. It is essential to read and follow instructions and warnings found in this manual prior to installation, set up, and use, in order for theproduct to operate properly and to avoid damage or injury.
ESR DATA
- Mode : UCX24-E008/E008A
- Input Power：1-2S
- Weight：10.9g
- Power Connector： XH2.54-3P
- Motor Limit：2S LiPo
- RF Standard：2.4GHz
- Size：33.4×30×12.3mm
- Brakes：Proportional
- Motor Connector: PH2.0-3P
INSTALLATION
- Mount your ESR and switch securely usinghigh high-quality double-sided tape.
- Always power ON your transmitter before the ESR and power OFF the ESR before thetransmitter.
FAQ
- Q: What is the purpose of the ESR in the product?
- A: The ESR serves as an innovative electronic device that integrates lighting control functions, speed control, and signal reception for enhanced performance.
- Q: Can I use a power input higher than 2S with this device?
- A: It is recommended to adhere to the specified power input range of 1-2S to ensure optimal functionality and prevent damage to the device.
Documents / Resources
 |
MONOCLONIUS UCX24-E008 Speed Control and Receiver [pdf] Instruction Manual UCX24-E008, UCX24-E008 Speed Control and Receiver, Speed Control and Receiver, Receiver |