MGC FNC-2000 Fire Network Controller Module
Features
- Max of 63 nodes can be connected
- Single mode fiber links can be up to 10Km
- Multi mode fiber links can be up to 1.5Km
- Provides network capability
- Provides an interface for adding option fiber optical
- Removeable terminal blocks
- Mounts in the FX-2000 main and expander chassis
Description
The FNC-2000 provides network capability to the system. One Fire Network Controller Module is required per network node panel. In addition, the FNC-2000 provides an interface for adding one optional Fiber Optic Network Adder Module: FOM2000-SP, FOM-2000-SM or FOM-2000-UM. The FNC-2000 mounts in the FX-MNS. The FNC-2000 also mounts in the FX-2000 main and expander chassis.
Power Consumption
| Normal Operation Voltage | Amps |
| Stand by | 190 mA |
| Alarm | 190 mA |
Ordering Information
| Model | Description |
| FNC-2000 | Fire Network Controller Module |
Canada 25 Interchange Way Vaughan, ON L4K 5W3
Telephone: 905-660-4655
Fax: 905-660-4113 U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: 888-660-4655
Fax Toll Free: 888-660-4113
www.mircom.com
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance, installation, testing and certification, refer to technical literature. This document contains intellectual property of Mircom. The information is subject to change by Mircom without notice. Mircom does not represent or warrant correctness or completeness.
firealarmresources.com
Documents / Resources
 |
MGC FNC-2000 Fire Network Controller Module [pdf] Owner's Manual FNC-2000 Fire Network Controller Module, FNC-2000, Fire Network Controller Module, Network Controller Module, Controller Module |
