MGC ANC-4000 Audio Network Controller Module
Description
The ANC-4000 Audio Network Controller provides audio interface microphone and control on the network system and storage up to 30 minutes of Alert, Evacuation, or other voice messages and tones. The ANC-4000 mounts on a plate in the QMB-5000N audio card cage or in the FX-MNS main chassis. The TNC-5000 can be attached to the ANC-4000.
Compatible with FleX-Net™ FX-4000N Series Panels
Features
- Provides audio microphone interface and control
- Stores Evacuation, Alert and other voice messages and tones
- Can store up to 30 minutes of messages or tones
- Removeable terminal blocks
- Mounts in the QMB-5000N card cage or in the FX-MNS main chassis
- Compatible with FleX-Net™ FX-4000N Series Panels.
Power Consumption
| Normal Operation Voltage | Amperes |
| Stand by | 255 mA |
| Alarm | 265 mA |
Ordering Information
| Model | Description |
| ANC-4000 | Audio Network Controller Module |
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance, installation, testing and certification, refer to technical literature. This document contains intellectual property of Mircom. The information is subject to change by Mircom without notice. Mircom does not represent or warrant correctness or completeness.
Customer Support
Canada
25 Interchange Way Vaughan, ON L4K 5W3
Telephone: 905-660-4655 | Fax: 905-660-4113
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: 888-660-4655 | Fax Toll Free: 888-660-4113
www.mircom.com
Documents / Resources
 |
MGC ANC-4000 Audio Network Controller Module [pdf] Owner's Manual ANC-4000 Audio Network Controller Module, ANC-4000, Audio Network Controller Module, Network Controller Module, Controller Module, Module |
