PWM-60 IoT Series 60W Wireless Lighting Constant Voltage LED Driver Solution
Specifications
- Model: PWM-60-12, PWM-60-24, PWM-60-48
- DC Voltage: 12V, 24V, 48V
- Rated Current: 5A, 2.5A, 1.25A
- Rated Power: 60W
- Output PWM Frequency: up to 4kHz
- Voltage Range: 90 ~ 305VAC, 127 ~ 431VDC
- Frequency Range: 47 ~ 63Hz
- Power Factor: PF>0.97/115VAC, PF>0.95/230VAC,
PF>0.92/277VAC - Total Harmonic Distortion: THD<20%
- Input Efficiency: 86%, 89%, 90%
- Max. No. of PSUs on 16A Circuit Breaker: 9 units (type B), 16
units (type C) at 230VAC
Product Usage Instructions
Installation
- Ensure the power source is disconnected before
installation. - Mount the LED driver in a well-ventilated area following the
manufacturer’s guidelines. - Connect the input and output wires securely to the
corresponding terminals.
Operation
- Apply power to the LED driver within the specified voltage
range. - Check that the connected LEDs are functioning properly.
- Adjust output settings as needed using compatible control
systems.
Maintenance
- Regularly inspect the LED driver for any signs of damage or
overheating. - Clean the driver and surrounding area to prevent dust
buildup. - Replace the driver if it shows signs of malfunction or
wear.
FAQ
Q: How do I know if the LED driver is compatible with my
lighting system?
A: Check the voltage and current requirements of your LEDs and
ensure they fall within the specifications of the LED driver.
Q: What should I do if the LED driver overheats during
operation?
A: Turn off the power immediately and allow the driver to cool
down before investigating the cause of overheating.
Q: Can I connect multiple LED drivers in parallel?
A: Yes, you can connect multiple drivers in parallel as long as
the total load does not exceed the maximum capacity of your circuit
breaker.
60W Wireless Lighting Constant Voltage LED Driver Solution
PWM-60 IoT Series
User’s Manual
IP67
IS 15885(Part 2/Sec13)
THOMAS SAMUEL
THOMAS SAMUEL
R-41027766
Tuya Silvair
File Name:PWM-60 IoT-SPEC 2024-06-24
P W M – 6 0 I o T 60W Wireless Lighting Constant Voltage LED Driver Solution
Series
SPECIFICATION
MODEL
PWM-60-12
PWM-60-24
PWM-60-48
DC VOLTAGE
12V
24V
48V
RATED CURRENT
5A
2.5A
1.25A
RATED POWER
60W
60W
60W
OUTPUT PWM FREQUENCY (Typ.) up to 4kHz
SETUP, RISE TIME Note.2 1000ms,80ms/115VAC or 230VAC for BLE and TY; 2000ms,80ms/115VAC or 230VAC for SVA
HOLD UP TIME (Typ.)
16ms/115VAC or 230VAC
VOLTAGE RANGE Note.3
90 ~ 305VAC 127 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC @ full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
TOTAL HARMONIC DISTORTION
THD< 20%(@load60%/115VAC, 230VAC; @load75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION” section)
INPUT
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.)
86%
89%
90%
0.8A / 115VAC 0.4A / 230VAC 0.32A / 277VAC COLD START 50A(twidth=270s measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. NO. of PSUs on 16A CIRCUIT BREAKER
9 units (circuit breaker of type B) / 16 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.25mA / 277VAC
<1W
OVERLOAD
108 ~ 130% rated output power Hiccup mode, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
15 ~ 17V
28 ~ 34V
Shut down o/p voltage, re-power on to recover
54 ~ 60V
OVER TEMPERATURE Shut down o/p voltage, re-power on to recover
WORKING TEMP.
Tcase=-20 ~ +85 (Please refer to ” OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.
Tcase=+85
WORKING HUMIDITY
20 ~ 95% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/ (0 ~ 50)
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
WIRELESS PROTOCOL DIMMING RANGE FUNCTION WIRELESS DISTANCE
Bluetooth low energy 2.4GHz protocol 0 ~ 100% Minimum dimming level:1%,dim to off Up to 20m
DIMMING
Note.10 Please refer to “DIMMING OPERATION” section
Ul8750( type “HL” ), UL879( for 12V,24V Blank Type only), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, SAFETY STANDARDS Note.5 BS EN/EN61347-2-13 independent,BS EN/EN62384, BIS IS15885(for 12,24,48 Blank Type only),
EAC TP TC 004, Ip67(except for BLE type), GB19510.1,GB19510.14 approved; Design refer to BS EN/EN60335-1
WITHSTAND VOLTAGE
SAFETY & EMC
ISOLATION RESISTANCE
EMC EMISSION Note.6
I/P-O/P:3.75KVAC
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load60%) ; BS EN/EN61000-3-3, GB/T 17743, GB17625.1,EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Line 2KV),EAC TP TC 020
MTBF
2938.9K hrs min. Telcordia SR-332 (Bellcore) ; 299.8K hrs min. MIL-HDBK-217F (25)
OTHERS DIMENSION
150*53*35mm (L*W*H)
PACKING
0.49Kg;30pcs/15.7Kg/1.0CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature.
2. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
3. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
4. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected
by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75 or less.
6. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com 7. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft).
8. For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf 9. When the power is turned on at -40, it may enter the pairing mode.
10. The dimming memory function needs at least 5 seconds to complete.
11. The matching mode of TY1 type is on-off-on-off-on by AC or DC power. 12.To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a
switch without permanently connected to the mains.
Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
File Name:PWM-60 IoT-SPEC 2024-06-24
P W M – 6 0 I o T 60W Wireless Lighting Constant Voltage LED Driver Solution
Series
DIMMING OPERATION
AC/L(Brown) AC/N(Blue)
SJTW 18AWG×2C
Dimming principle for PWM style output Dimming is achieved by varying the duty cycle of the output current.
Output DC current ON
Io=0A
OFF TON
T
UL2464 18AWG×2C(Vo+,Vo-)
Vo+(Red) Vo-(Black)
TON Duty cycle(%) =
×100%
T
Output PWM frequency : up to 4KHz
Bluetooth control
To be used through APP available on Apple Store and Google Play Store for iOS and Android. Search: BLE with Casambi/TY1 with Smart Life/SVA with Silvair Example:
The APP for BLE type is “Casambi” The APP for TY1 type is “Smart Life” The APP for SVA type is “Silvair”
DC output
LED Strip
AC mains
File Name:PWM-60 IoT-SPEC 2024-06-24
P W M – 6 0 I o T 60W Wireless Lighting Constant Voltage LED Driver Solution
Series
OFFICIAL WEBSITE AND ECOSYSTEM INFORMATION
The real time Bluetooth IC temperature is shown in the APP. In case it reaches above 77 ºC (equivalent to Tc 85ºC), the driver will be turn off to provide a protection. In case the units is cooled down, it can be manually turn ON and back to normal operation again. NOTE: 1.This software temperature protection is an extra independent function from driver its own hardware over temperature protection(when it is enabled, it needs
re-AC power on to recover). 2.In general the software temperature protection is triggered before the hardware one when in over temperature. 3.Website: https://www.casambi.com
NOTE: 1.Website: https://www.tuya.com NOTE: 1.Website: https://www.silvair.com
File Name:PWM-60 IoT-SPEC 2024-06-24
LOAD (%)
P W M – 6 0 I o T 60W Wireless Lighting Constant Voltage LED Driver Solution
Series
OUTPUT LOAD vs TEMPERATURE
100
80 230VAC Input only
60 50 40
20
-20 -15 -10
0
15
30
50
60
AMBIENT TEMPERATURE,Ta ()
70 (HORIZONTAL)
LOAD (%)
100
80 230VAC Input only
60
40
20
-20 -15 0
20
45
60
70
80
85 (HORIZONTAL)
Tcase ()
STATIC CHARACTERISTIC
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
INPUT VOLTAGE (V) 60Hz De-rating is needed under low input voltage.
PF
POWER FACTOR (PF) CHARACTERISTIC
Tcase at 75
1.0
0.9
0.8
0.7
277V
0.6
230V
115V 0.5
0.4
0.3
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
(60W) LOAD
TOTAL HARMONIC DISTORTION (THD)
48V Model, Tcase at 75
20%
18%
16%
14%
12%
10%
8%
6%
4%
2%
0%
50%
60%
70%
80%
LOAD
277VAC 230VAC 115VAC
90%
100%
EFFICIENCY(%)
EFFICIENCY vs LOAD
PWM-60 series possess superior working efficiency that up to 90% can be reached in field applications. 48V Model, Tcase at 75
92%
90%
88% 86% 84%
277V 230V 115V
82%
80%
78% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
THD LOAD (%)
File Name:PWM-60 IoT-SPEC 2024-06-24
P W M – 6 0 I o T 60W Wireless Lighting Constant Voltage LED Driver Solution
Series
LIFE TIME
LIFETIME(Kh)
120
100
80
60
40
20
0
25
35
45
55
65
75
85
Tcase( )
Bluetooth mesh LED driver for intelligent lighting Application
File Name:PWM-60 IoT-SPEC 2024-06-24
P W M – 6 0 I o T 60W Wireless Lighting Constant Voltage LED Driver Solution
Series
Block Diagram
EMI FILTER
I/P
&
RECTIFIERS
PFC CIRCUIT
POWER SWITCHING
O.T.P.
O.L.P.
PWM & PFC CONTROL
PFC fosc : 50~120KHz PWM fosc : 60~130KHz
RECTIFIERS &
FILTER
O.L.P.
DIMMING CIRCUIT
DETECTION CIRCUIT
O.V.P.
Vo+ VoMCU
Mechanical Specification
AC/L(Brown) AC/N(Blue)
300±20
150 5
5 53
SJTW 18AWG×2C
4.5
tc 35
13
5
tc : Max. Case Temperature85
5
Case No. PWM-60 Unit:mm
300±20 UL2464 18AWG×2C(Vo+,Vo-)
Vo+(Red) Vo-(Black)
35
metal or any material that stops RF signal
File Name:PWM-60 IoT-SPEC 2024-06-24
P W M – 6 0 I o T 60W Wireless Lighting Constant Voltage LED Driver Solution
Series
Recommend Mounting Direction
Installation Manual Connection for Blank-type
AC/L(BROWN) AC/N(BLUE)
Vo+(RED)
+
–
Vo-(BLACK)
LED Strip
Cautions Before commencing any installation or maintenance work, please disconnect the power supply from the utility. Ensure
that it cannot be re-connected inadvertently! Keep proper ventilation around the unit and do not stack any object on it. Also a 10-15 cm clearance must be kept when
the adjacent device is a heat source. Mounting orientations other than standard orientation or operate under high ambient temperature may increase the
internal component temperature and will require a de-rating in output current. Current rating of an approved primary /secondary cable should be greater than or equal to that of the unit. Please refer
to its specification. For LED drivers with waterproof connectors, verify that the linkage between the unit and the lighting fixture is
tight so that water cannot intrude into the system. For dimmable LED drivers, make sure that your dimming controller is capable of driving these units.PWM series
require 0.15mA each unit. Tc max. is identified on the product label. Please make sure that temperature of Tc point will not exceed limit. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30
minutes. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC
performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
File Name:PWM-60 IoT-SPEC 2024-06-24
Documents / Resources
 |
MEAN WELL PWM-60 IoT Series 60W Wireless Lighting Constant Voltage LED Driver Solution [pdf] User Guide PWM-60 IoT Series 60W Wireless Lighting Constant Voltage LED Driver Solution, PWM-60 IoT Series, 60W Wireless Lighting Constant Voltage LED Driver Solution, Lighting Constant Voltage LED Driver Solution, Constant Voltage LED Driver Solution, LED Driver Solution, Driver Solution, Solution |