matt E EVU-6-32-R Three Phase Connection Unit with 6 x 32amp Type A RCBOs
Product Usage Instructions
Installation
- Ensure the power source is switched off before installation.
- Mount the EV connection unit securely on a flat surface using appropriate screws.
- Connect the input cables to the designated terminals based on the supplied power specifications.
- Route the output cables through the cable entry facilities provided, ensuring a secure connection.
Operation
- After installation, switch on the power source and verifyproper functioning of the unit.
- If any issues are detected, refer to the user manual for troubleshooting steps or contact customer support.
Maintenance
- Regularly inspect the unit for any signs of damage or wear.
- Clean the unit using a dry cloth to remove any dust or debris that may accumulate over time.
- Do not attempt to repair or modify the unit yourself; contact authorized service personnel for any repairs.
- The EVU-6-32-R from matt:e is simple single dedicated connection unit with built in O-PEN technology, which allows for the connection of 6 x 32 amp EV charge points to the existing PME earthing facility.
- The unit incorporates a 5 pole isolator with built-in UV release that disconnects all poles including CPC in the event of a fault, manually resettable in line with BS: 7671 2018 Amendment 1 2020 Regulation 722.411.4.1 (iii) The O-PEN technology does not require earth rods or measuring electrodes to function correctly.
Product Features
- Built in O-PEN technology
- Standard mild steel IP4X enclosure
- NO EARTH ELECTRODES REQUIRED
- Phase loss protection
- Built in 5 pole mains isolator with manually resettable shunt trip
- Standard 1 Year parts warranty
- Simple wire in wire out connection
- With 6 x 32amp double pole Type A RCBOs
- Designed and Built in the UK
Dimensions and Specifications
- Description Dedicated EV connection centre
- Input Volts Nominal input voltage three-phase 400V 50Hz
- Max Load 32 amps per load
- Cable Entry Facility Top and bottom
- Terminal Capacity Supply 50.0 mm2 Load 25.0 mm2
- Dimensions ( H x W x D ) 550mm x 360mm x 140mm
- Weight Approximately 10kG
- Enclosure Mild Steel Powder Coated
- Ingress Protection IP4X
- Warranty The matt:e EVU-6-32-R is guaranteed for a period of 1 year from the date of purchase. This warranty is limited to the replacement of faulty components only.
t: 01543 227290 e: info@matt-e.co.uk w: www.matt-e.co.uk matt:e Ltd, Unit 5 Common Barn Farm Tamworth Road Lichfield WS14 9PX
FAQs
Q: What is the warranty coverage for the EVU-6-32-R?
A: The product is guaranteed for a period of 1 year from the date of purchase. The warranty covers the replacement of faulty components only.
Q: Can I use the EVU-6-32-R for single-phase connections?
A: No, this unit is designed specifically for three-phase connections and should not be used for single-phase applications.
Documents / Resources
 |
matt E EVU-6-32-R Three Phase Connection Unit with 6 x 32amp Type A RCBOs [pdf] Owner's Manual EVU-6-32-R Three Phase Connection Unit with 6 x 32amp Type A RCBOs, EVU-6-32-R, Three Phase Connection Unit with 6 x 32amp Type A RCBOs, Connection Unit with 6 x 32amp Type A RCBOs |