matt E ARD-1-32-TP-R-SPD Three Phase Connection Unit
Product Specifications
- Input Volts: 400V 50Hz
- Max Load: 32amps
- Cable Entry Facility: Top and bottom
- Terminal Capacity: 25mm2
- Dimensions (H x W x D): 550mm x 360mm x 120mm
- Weight: Approximately 7kg
- Enclosure: Mild Steel Powder Coated
- Ingress Protection: IP4X
- Warranty: 1 Year
Product Usage Instructions
Installation:
- Ensure the power supply is turned off before installation.
- Mount the ARD connection unit securely in a suitable location.
- Connect the input cable to the designated terminals ensuring proper polarity.
Operation:
- After installation, turn on the power supply and verify proper functionality.
- The auto reset isolator will automatically reset in case of a fault.
Maintenance:
- Regularly inspect the unit for any signs of damage or wear.
- Clean the unit periodically to ensure optimal performance.
Frequently Asked Questions (FAQ)
- What is the purpose of the Type 2 SPD in this product?
The Type 2 Surge Protection Device (SPD) is designed to protect against voltage spikes and surges, enhancing the safety of connected equipment. - How can I reset the auto rest isolator?
The auto reset isolator will reset automatically after a fault condition is cleared. If manual intervention is required, consult the user manual for specific instructions.
INTRODUCTION
- The matt:e ARD connection centres with unique 5 pole auto reset device and built in Type 2 SPD.
- Simple to install, dedicated EV connection centres with built in O-PEN® technology that allows for the connection of EV charge points to the PME earthing facility without the use of earth electrodes.
- Helping to facilitate compliance with BS:7671. 2018 Amendment 2, 2022 Regulation 722.411.4.1.(iii).
Product Features and benefits
- Built in O-PEN® technology
- NO EARTH ELECTRODES REQUIRED
- Helps reduce disruptive and costly groundworks
- Removes the risk of striking buried services
- Simple wire in wire out connection
- Complete with Type 2 SPD
- With built in 32A TPN Type A RCBO
- Mild steel IP4X enclosure
- Standard 1 Year parts warranty.
Specifications
| Input Volts | 400V 50Hz |
| Max Load | 32amps |
| Cable Entry Facility | Top and bottom |
| Terminal Capacity | 25mm2 |
| Dimensions ( H x W x D ) | 550mm x 360mm x 120mm |
| Weight | Approximately 7kG |
| Enclosure | Mild Steel Powder Coated |
| Ingress Protection | IP4X |
| Warranty | 1 Year |
ABOUT COMPANY
- T: 01543 227290
- E: info@matt-e.co.uk
- W: www.matt-e.co.uk
- matt:e Ltd, Unit 1 Langley Brook Business Park, Middleton, Tamworth B78 2BP
Documents / Resources
 |
matt E ARD-1-32-TP-R-SPD Three Phase Connection Unit [pdf] Owner's Manual ARD-1-32-TP-R-SPD Three Phase Connection Unit, ARD-1-32-TP-R-SPD, Three Phase Connection Unit, Connection Unit, Unit |