Specifications
- Model Name: WCM_NFC_INT
- Manufacturer: Xuancheng Luxshare Precision Industry Co., Ltd
- Address: No.5, Baishou Road, Hi-Tech Industrial Development Zone, Xuancheng, Anhui Province, P.R. China
- Max. Output: 15W
- Input: 13.5V 3A
- Operating Temperature: -40~85°C
- Storage Temperature: -40~120°C
- FCC Certification: Part 15 of the FCC rules
- IC Certification: Industry Canada’s license-exempt RSS Standard(s)
- EU Directive Compliance: 2014/53/EU
- Frequency Band: 122.72~132.72kHz
- Maximum Power Transmitted: < 0.01mW
Product Description
The wireless phone charger can charge your Qi-enabled smartphone at up to 15W of power. Simply place your smartphone on the charger.
NOTE: The wireless charger may not work if your phone case is metal. Take the phone out of the case and place the phone on the charger.
Product Usage Instructions
- Ensure your smartphone is Qi-enabled for wireless charging.
- If your phone case is metal, remove the phone from the case before charging.
- Place your smartphone on the charger in the designated area for charging.
- Ensure the charger is connected to a power source with the provided input specifications.
- The charging will begin automatically once the smartphone is correctly placed on the charger.
- Do not place any metal objects on the charger while in use to avoid interference.
FCC and IC Certification
The devices listed above comply with Part 15 of the FCC rules and Industry Canada’s license-exempt RSS Standard(s) and EU Directive 2014/53/EU. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: Radiation Exposure Statement
The product complies with the FCC/IC RF Exposure for Low Power Consumer Wireless Power Transfer. RF exposure limits set forth for an uncontrolled environment are safe for intended operation as described in this manual. The further RF exposure that compliance was demonstrated at 20cm and greater separation from the user body, or set the device to lower output power if such a function is available.
Caution: This equipment and its antennas must not be co-located or operated with another antenna or transmitter.
Caution: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement: This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Frequency band in which the radio equipment operates: 122.72~132.72kHz
Maximum power transmitted: < 0.01mW
Manufacturer: Xuancheng Luxshare
Precision Industry Co., Ltd
Address: No.5, Baishou Road, Hi-Tech Industrial Development Zone, Xuancheng, Anhui Province, P.R. China
FAQs
Q: Can I charge non-Qi-enabled smartphones with this wireless charger?
A: No, this wireless charger is specifically designed for Qi-enabled smartphones only.
Q: What should I do if the charger is not working?
A: Ensure that your smartphone is properly placed on the charger and that no metal objects are interfering with the charging process. If the issue persists, try using a different power source or contact customer support.
Q: Is it safe to leave my phone on the charger overnight?
A: It is generally safe to leave your phone on the charger overnight; however, it is recommended to avoid continuous charging for extended periods to prolong battery life.
Documents / Resources
 |
Luxshare WCM_NFC_INT Wireless Charging Module [pdf] User Guide 2BBAQ-WCMNFCINT, 2BBAQWCMNFCINT, WCM_NFC_INT Wireless Charging Module, WCM_NFC_INT, Wireless Charging Module, Charging Module, Module |