lumenradio 840-2110 Automation System with Wireless Modbus
Product Specifications
- Product Name: W-Modbus
- Connectivity: Wireless Modbus
- Mounting Options: DIN rail, Wall mount
- Gateway Options: DIN rail, Wall mount
- Color Indicators: Blue, Green, Yellow
Product Usage Instructions
- Installation Guide
Connect your building automation system with wireless Modbus using the W-Modbus device. Choose between DIN rail or wall mount for installation. - Gateway Set-Up
Set your Baud rate, stop bit, and parity on the gateway. Move the switch to the appropriate setting (A for DIN rail, B for wall mount). - Connecting Field Devices
Install the LumenRadio node next to your field devices, starting with the one closest to the gateway. Connect the LumenRadio device to the chosen device (zone or room controller) and optionally set a local Baud rate. - Node Configuration
Place the LumenRadio device above the chosen device and connect. The node lights will sweep in blue. Wait until the lights start blinking green, indicating successful connection to the gateway. - Finalizing Installation
Return to the gateway and move the switch to GATEWAY mode. The devices will blink yellow as they enter secure mode. Once completed, you will have a wireless connection. - Using the W-Modbus App
To use the W-Modbus app, press the button on the gateway three times until it blinks blue twice. Verify your installation in the app and access a detailed overview by selecting Network Map.
For more information, visit www.lumenradio.com
Connect your building automation system with a wireless Modbus
For installation, no Modbus cables are needed.
You need this for installation. Choose either W-Modbus DIN rail or W-Modbus wall mount.
The LumenRadio device next to the Modbus master (client) can serve as your gateway, with both DIN rail and wall mount options available.
GATEWAY SET-UP
Set your Baud rate, stop bit and parity on the gateway (A or B).
A – Move the switch to ”COMM” or B – Move the switch to 
”.
Continue by installing the LumenRadio node next to your field devices, starting with the one closest to your gateway. 
Connect the LumenRadio device with chosen device (zone controller). Optionally, set a local Baud rate.
Place the LumenRadio device preferably above the chosen device (room controller) and connect. Optionally, set a local Baud rate. 
The lights on your node will now sweep in blue.
When the lights start blinking green, the node has found the gateway. This can take up to five minutes.
Go back to the gateway.
A – Move the switch to ”GATEWAY” or B – Move the switch to
The devices blink yellow entering secure mode. This may take up to 5 minutes.
Now you have a wireless connection!
To use the W-Modbus app, press the button on the gateway three times so that it blinks blue twice and you are ready to connect.
Verify your installation in the app. For a detailed overview, select Network Map.
Learn more at www.lumenradio.com
FAQ
Q: How do I know if my node has successfully connected to the gateway?
A: The lights on the node will start blinking green, indicating a successful connection.
Q: How long does it take for the devices to enter secure mode?
A: The devices may take up to 5 minutes to enter secure mode, indicated by blinking yellow lights.
Documents / Resources
 |
lumenradio 840-2110 Automation System with Wireless Modbus [pdf] Installation Guide 840-2110, 840-2110 Automation System with Wireless Modbus, Automation System with Wireless Modbus, Wireless Modbus |