Switch Handle Retrofit Kit
Product Specifications
- Product Name: Switch Handle Retrofit Kit
- Model Number: II19-024
- Tools Required: Drill, Riveter
- Materials in the Kit: Handle, Switch, 5.0mm drill bit,
Rivets
Product Usage Instructions
Installation Process
- Open the window and secure it in position.
- Drill out the 2 rivets of the handle base.
- Drill the 2 aluminum plate holes and handle base with a 5 mm
drill bit. If too tight, drill again with a 13/64 drill bit. - Install the new handle and its base using the provided
rivets.
Note on Installation
Improper placement of rivets will prevent the window from
closing in the frame.
Frequently Asked Questions (FAQ)
Q: What should I do if the handle base is too tight after
drilling?
A: If the handle base is too tight after drilling with a 5 mm
drill bit, you should drill again using a 13/64 drill bit to ensure
a proper fit.
Q: How can I contact customer support for further
assistance?
A: For any questions or assistance, please contact us at
432-LIPPERT (432-547-7378) or email us at
customerservice@lci1.com.
II19-024
SWITCH HANDLE RETROFIT KIT
INDEPENDENT INSTRUCTION
Resources Required
Tools
Handle
Switch
1. Drill 2. Riveter 3. 5.0mm drill bit 4. Material in the kit
Horizontal
1. 2. 3. 4.
Handle- 42661 Handle base- 4375
5 1 rivet (1/8″ x 5/8″)- 04206 /28/2 2 rivets- 8201212
1. Assembled switch plate 2. Horizontal- 042653 3. Vertical- 04376 4. Butt splice- 04841 5. 2 rivets- 4293 6. Housing- 04218F/B
public release 05 Vertical
from Procedure d 1. Open the window and secure in position (Fig. 1). Not approve 2. Drill out the 2 rivets of the handle base (Fig. 2).
Fig. 1
Fig. 2
Rev: 05.27.25
Page 1
CCD-0010268
II19-024
SWITCH HANDLE RETROFIT KIT
INDEPENDENT INSTRUCTION
3. Drill the 2 aluminum plate holes and handle base with 5 mm drill bit (Fig. 3).
NOTE: If it is too tight, drill again with a 13/64″ drill bit.
4.
Install the new handle and its base as shown (Fig. 4) using the 2 rivets provided.
lease 05/28/25 Fig. 3
Fig. 4
public re Improper placement of rivets will prevent the window from closing in the frame.
Not approved from
As a supplier of a broad array of highly-engineered components in the recreation and transportation product markets, safety, education and customer satisfaction are our primary concerns. Should you have any questions, please do not hesitate to contact us at 432-LIPPERT (432-547-7378) or by email at customerservice@lci1.com.
Self-help tips, technical documents, product videos and a training class schedule are available at lippert.com or by downloading the LippertNOW app.
Rev: 05.27.25
Page 2
CCD-0010268
II19-024
KIT DE MODERNISATION DE POIGNÉE D’INTERRUPTEUR
INSTRUCTION INDÉPENDANTE
Resources Required
Outils
Poignée
Interrupteur
1. Perceuse 2. Riveteuse 3. Mèche 5.0 mm 4. Matériel dans la trousse
Horizontale
1. 2. 3. 4.
Poignée- 42661 Base de poignée- 4375
5 1 rivet (1/8″ x 5/8″)- 04206 /28/2 2 rivets- 8201212
1. Plaque d’interupteur assemblée 2. Horizontale- 042653 3. Verticale- 04376 4. Connecteur- 04841 5. 2 rivets- 4293 6. -Boitier 04218F/B
public release 05 Verticale
from Procedure d 1. Ouvrir la fenêtre et la maintenir en position (Fig. 1). Not approve 2. Percer au travers les 2 rivets de la base de poignée (Fig. 2).
Fig. 1
Fig. 2
Rev: 05.27.25
Page 3
CCD-0010268
II19-024
KIT DE MODERNISATION DE POIGNÉE D’INTERRUPTEUR
INSTRUCTION INDÉPENDANTE
3. Repercer les 2 trous de la base et la poignée avec la mèche 5mm (Fig. 3).
NOTE: Si le trou est trop petit, repercer avec une mèche 13/64″.
4.
Installer la nouvelle base de poignée avec les 2 rivets (Fig. 4).
lease 05/28/25 Fig. 3
Fig. 4
public re Un mauvais positionnement des rivets empêchera la fenêtre de fermer dans le cadre.
Not approved from
En tant que fournisseur d’une large gamme de composants de haute technologie sur les marchés des produits de loisirs et de transport, la sécurité, l’éducation et la satisfaction de la clientèle sont nos principales préoccupations. Si vous avez des questions, n’hésitez pas à nous contacter au 432-LIPPERT (432-547-7378) ou par courriel à customerservice@lci1.com. Des conseils d’auto-assistance, des documents techniques, des vidéos de produits et un programme de cours de formation
sont disponibles sur lippert.com ou en téléchargeant l’application LippertNOW.
Rev: 05.27.25
Page 4
CCD-0010268
Documents / Resources
 |
LIPPERT Switch Handle Retrofit Kit [pdf] Instructions II19-024, 42661, 4375, Switch Handle Retrofit Kit, Handle Retrofit Kit, Retrofit Kit |