T-IN2-RND1 In Table Elegant Round Tabletop Connectivity Box
“
Product Information:
Specifications:
- Model: T-IN1-RND1 & T-IN2-RND1
- Manufacturer: Kramer
- Recommended Table Thickness: 10-50 mm (0.39 – 1.97 inches)
Product Usage Instructions:
Step 1: Check What’s in the Box
Ensure the following components are included:
- Enclosure sheet metal
- Locking device
- Inner frame
- Cutout template
Step 2: Table Cutout Dimensions
Follow these steps for accurate installation:
- Use the provided cutout template and a hole saw for
precision. - Fasten screws until the ‘dog ear’ is secure to the table.
- Fit the device to a table thickness between 10-50 mm.
Step 4: Slide the Chosen Module(s) and Insert Cable into
Pass-through Holes
- Slide the selected module(s) into place and lock using a
screwdriver. - Insert cable heads into the pass-through holes.
Step 5: Place Inner Frame
Position the inner frame correctly into place.
Step 6: Lock Inner Frame
- Align the insert marking line with the right enclosure marking
line. - Rotate the inner frame counterclockwise to align other
lines. - To remove the inner frame, rotate it clockwise.
Frequently Asked Questions (FAQ):
Q: Where can I download the latest user manual and firmware
upgrades?
A: You can download the latest user manual and check for
firmware upgrades at www.kramerav.com/downloads/T-IN1-RND1 and
www.kramerav.com/downloads/T-IN2RND1.
“`
T-IN1-RND1 & T-IN2-RND1
Scan to see website
Quick Start Guide
This guide helps you install and use your T-IN1-RND1 & T-IN2-RND1 for the first time. Go to www.kramerav.com/downloads/T-IN1-RND1 & www.kramerav.com/downloads/T-IN2RND1 to download the latest user manual and check if firmware upgrades are available.
Step 1: Check What’s in the Box
Enclosure sheet metal
Locking device
Inner frame
Cutout template
Available in 2 colors: Black – RAL 9011 and White RAL 9002
Step 2: Table Cutout Dimensions
· T-IN1-RND1 – Ø108mm (4-¼”) · T-IN2-RND2 – Ø139mm (5-½”)
Kramer recommends using the cutout template (packed with device) and a hole saw for maximal accuracy.
Step 3: Place Enclosure Fasten Screws
1. Keep screws until the ‘dog ear’ is fastened to the table. 2. Fit to standard table thickness between 10-50 mm (0.39″ – 1.97″).
T-IN1-RND1, T-IN2-RND1 Quick Start
P/N: 2 9 0 0 – 3 0 1 7 7 7 QS
Rev: 1
Step 4: Slide the Chosen Module(s) and Insert Cable into Pass-through Holes
1. Slide the chosen module(s) and use a screwdriver to lock the locking device.
2. Insert cable heads in the pass-through holes.
Modules listed in Modules List section
Step 5: Place Inner Frame
1. Place the inner frame into its position.
Step 6: Lock Inner Frame
1. Place the insert marking line to be aligned with the right enclosure marking line. 2. Slightly rotate the inner frame counterclockwise so the other lines on the inner frame and the enclosure line are
aligned. 3. To remove the inner frame, rotate the inner frame clockwise (see unlocked figure)
Documents / Resources
 |
kramer T-IN2-RND1 In Table Elegant Round Tabletop Connectivity Box [pdf] User Guide T-IN1-RND1, T-IN2-RND1, T-IN2-RND1 In Table Elegant Round Tabletop Connectivity Box, T-IN2-RND1, In Table Elegant Round Tabletop Connectivity Box, Elegant Round Tabletop Connectivity Box, Round Tabletop Connectivity Box, Tabletop Connectivity Box, Connectivity Box |
