Instructions
MS8009R LED Digital Clock
Thank you for purchasing this instrument from Intellitronix. We value our customers!
INSTALLATION GUIDE
LED Digital Clock
Part Number: M8009
* Always disconnect the battery before attempting any electrical work on your vehicle.*
WIRING INSTRUCTIONS
Note: Automotive circuit connectors are the preferred method of connecting wires. However, you may solder if you prefer.
Ground – Black Connect directly to the engine block.
Power – Red Connect to a switched +12V source, such as the ignition.
Memory – Pink Connect directly to the battery to retain the time when the ignition is shut off.
Dimmer – Purple Connect to the parking lights to dim the LEDs 50% when the headlights are on. However, do not connect to the headlight rheostat control wire; the dimming feature will not work properly.
Once the gauge is wired in, program the time with the two separate push buttons for hours and minutes.
Made in America
Lifetime Guarantee
Documents / Resources
 |
Intellitronix MS8009R LED Digital Clock [pdf] Instructions MS8009R LED Digital Clock, MS8009R, LED Digital Clock, Digital Clock, Clock |
