Contents hide
1 Hashoo Electronics L1-02 Series Air Conditioner With Remote Control
2 Specifications
3 Product Usage Instructions
4 Remote controller
5 Operation instructions
6 TIMER mode
7 LOCK mode
8 SLEEP mode
9 FAQs
10 Documents / Resources
10.1 References

Hashoo-Electronics-logo

Hashoo Electronics L1-02 Series Air Conditioner With Remote Control

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-product

Specifications

  • Model: L1-02/L1-12/L1-16-0
  • Operation Modes: Various modes including Heat, Timer, Quiet, Economy, Sleep, etc.
  • Remote Controller: Included for easy operation
  • Airflow Direction Control: Vertical and Horizontal adjustment
  • SMART Mode: Fuzzy logic operation for select models
  • Power Control: Start or stop the appliance

Product Usage Instructions

  • Operation Instructions
    Ensure to read the manual carefully before using the air conditioner. The remote controller plays a key role in operating the appliance efficiently.
  • Using the Remote Controller
    The remote controller transmits signals to the system and offers various functions like adjusting temperature, selecting operation modes, setting timers, and more.
  • Operating Modes
    The air conditioner offers different operation modes such as Heat, Timer, Quiet, Economy, Sleep, etc. Select the desired mode using the remote controller.
  • Airflow Direction Control
    You can control the airflow direction both vertically and horizontally to ensure optimal air distribution in the room.
  • SMART Mode (for select models)
    The SMART mode allows for fuzzy logic operation directly, enhancing the efficiency of the air conditioner.
  • Power Control
    Use the POWER button on the remote controller to start or stop the appliance as needed.

Remote controller

The remote controller transmits signals to the system.

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (1)

Indication symbols on LCD:

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (2)

Note: Each mode and relevant function will be further specified in the following pages.

Remote controller

How to Insert the Batteries

  1. Remove the battery cover according to the arrow direction.
  2. Insert new batteries, making sure that the (+) and (-) of the battery are matched correctly.
  3. Reattach the cover by sliding it back into position.

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (3)

Note:
Use 2 LR03 AAA(1.5volt) batteries. Do not use rechargeable batteries. Replace batteries with new ones of the same type when the display becomes dim.

Storage and Tips for Using the Remote Controller
The remote controller may be stored or mounted on a wall with a holder.

Note: The remote controller holder is an optional part.

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (4)

How to Use
To operate the room air conditioner, aim the remote controller to the signal receptor.The remote controller will operate the air conditioner at a distance of up to 7m when pointing at signal receptor of indoor unit.

CAUTIONS

  • For appropriate signal transmission between the remote controller and the indoor unit, keep the signal receiver away from the following items:
  • Direct sunlight or other strong lights or heat
  • Flat panel television screen or other electrical appliances that react to the remote controller

Additionally, the air conditioner will not operate if curtains, doors, or other materials block the signals from the remote controller to the indoor unit. If the signal may not be transmitted properly, either move these materials or consult your local dealer.

Operation instructions

Operation modes

Selecting mode

Press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (7) the button once by once

Result: The operation modes changed in sequence:

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (6)

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (5)

Heating mode is NOT available for a cooling-only air conditioner.

 FAN mode

Press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (8) the button once by once

Result: The operation modes changed in sequence:

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (9)

At “FAN ONLY” mode, the “AUTO” is not available. At “DRY” mode, Fan speed is set at “AUTO” automatically, “FAN” button is ineffective in this case.

Setting temperature

Press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (9)button once

Result : temperature setting by 1℃ or 1°F

Press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (11)button once

Result :  Lower temperature setting by 1℃ or 1°F

Gamme de températures disponibles
CHAUFFAGE,

REFROIDISSEMENT

 16℃~30℃(61°F~86°F)
SEC -7 ~ 7
VENTILATION SEULE Impossible à définir
  • Note: Press and hold the “ Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (7)” button and the “ Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (11)” button together for 3 seconds will alternate the temperature display between the ℃ and °F scale
  • Note: Heating mode is NOT available for cooling-only models.
  • Note: At “ry” mode, a decrease or rise of up to 7℃ can be set if you still feel uncomfortable.

Turning on
PressHashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (12)button.

Result: The RUN indicator of the indoor unit lights up.

SWING, SMART, TIMER ON, TIMER OFF, CLOCK, SLEEP and SUPER operation modes will be specified in the following pages.

  • Changing modes during operation, sometimes the unit does not respond at once. Wait 3 minutes.
  • During the heating operation, air flow is not discharged at the beginning. After 2－5 minutes, the air flow will be discharged until temperature of indoor heat exchanger rises.
  • Wait 3 minutes before restarting the appliance.

Airflow direction control (invalid for some models)
Vertical airflow(Horizontal airflow) is automatically adjusted to a certain angle by the operation mode after turning on the unit.

Operation mode Direction of airflow
COOLING, DRY horizontal
*HEATING, FAN ONLY downward

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (13)

The direction of airflow can be also adjusted to your own requirement by pressing the “Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (14)button of the remote controller.

Heating mode is only available for heat pump models.

Vertical airflow control (with the remote controller) 
Using a remote controller to set various angles of flow or a specific angle as you like.

Press “Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (15) ” button once.

Result: The vertical adjustment louver will swing up and down automatically.

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (16)

Press “Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (15)” button again .

Result: The louvers swing to a suitable angle as desired.

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (16)

Horizontal airflow control (with the remote controller)
Using a remote controller to set various angles of flow or a specific angle as you like. Press ” Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (15)  ” button once.

Result :          The horizontal adjustment louver will swing left and right automatically.

  

 

 

 

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- 46

PRESS
Press ” Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (15) ” button again.  
Result :           The louvers swing to a suitable angle as desired. Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- 46
NOTE: If the unit doesn’t have a ways airflow function, you can adjust  

PRESS
horizontal airflow by yourself.(invalid for some models)  
  • Do not turn the vertical adjustment louvers manually, otherwise malfunction may occur. If that happens, turn off the unit first and cut off the power supply, then restore power supply again.
  • It is better not to let the vertical adjustment louver tilt downward for a long time at COOLING or DRY mode to prevent condensed water from dripping.

SMART mode(invalid for some models)
In this mode, it can automatically adjust the operation mode, temperature, wind speed, wind direction, etc. according to the ambient temperature of the room to ensure that customers get the most comfortable experience.

How to set SMART mode?
Press the SMART button.

Result : Enters SMART mode(fuzzy logic operation) directly regardless of the unit is on or off Temperature and fan speed are automatically set based on theactual room temperature.

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (19)

For the split-type models, such as wall-mounted air conditioners and some floor-standing air conditioners, their operation mode and set temperature should be determined based on the indoor temperature.

Heat pump models

Indoor temperature Operation mode Target temperature
21℃(70°F) or below HEATING 22℃(72°F)
21℃-23℃(70°F-73°F) FAN ONLY  
23℃-26℃(73°F-79°F) DRY Room temperature decrease 2℃(2°F) after operate for 3 minutes
Over 26℃(79°F) COOLING 26℃(79°F)

Cooling only models

Indoor temperature Operation mode Target temperature
23℃(73°F) or below FAN ONLY  
23℃-26℃(73°F-79°F) DRY Room temperature decrease 2℃(2°F) after operate for 3 minutes
Over 26℃(79°F) COOLING 26℃(79°F)

For commercial air conditioner products, such as cassette-type air conditioners, duct-type air conditioners, ceiling & floor air conditioners, and some floor-standing air conditioners, their operation mode should be determined based on the difference between the indoor temperature and the set temperature.

Heat pump models

Indoor temperature Operation mode Target temperature
Below T-3℃(3°F) HEATING T
T-3℃(3°F)≤Tindoor≤T+3℃(3°F) FAN ONLY T
Over T+3℃(3°F) COOLING T

Cooling only models

Indoor temperature Operation mode Target temperature
T+3℃(3°F) or below FAN ONLY T
Over T+3℃(3°F) COOLING T
  • SMART button is ineffective in SUPER mode.The The
  • ECONOMY button is ineffective in SMART mode.
  • Press the MODE button to cancel SMATR mode.

Note: Temperature, airflow and direction are controlled automatically in SMART mode. However, For the on/off, you can choose from -2 to 2, for the inverter you can choose from -7 to 7. if you still feel uncomfortable.

SMART mode(invalid for some models)

What can you do in SMART mode?

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (20)

How to cancel the SMART mode?
Press the Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (7) button.

Result: The SMART mode will be cancelled.

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (21)

CLOCK button

How to adjust the real time?

  1. Press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (22) button.
    Result : The time flashes on the LCD.Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (23)
  2. PressHashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (9) andHashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (11) buttons.
    Result : Once to increase or decrease the time setting by 1 minute. One and a half seconds to increase or decrease the time setting by 10 minute. For a longer time to increase or decrease the time by 1 hour. Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- 47
  3. PressHashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (22) the button again.
    Result: Once to increase or decrease the time setting by 1 minute. One and a half seconds to increase or decrease the time setting by 10 minutes. For a longer time to increase or decrease the time by 1 hour.Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (24)

CLEAN mode (invalid for some models)

When the air conditioner is in standby, and the mode of remote controller is in Cooling or Dry , press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (26)button for 5 seconds once to start Clean mode ,then the indicator “Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (25) ” will display on LCD.

  • Clean mode is ineffective in SUPER mode.
  • Press the ON/OFF or SMART, or MODE button can exit the Clean mode, then the indicator will disappear.
  • After the clean process finish, the air conditioner will return to Cooling or Dry as preset, while the indicator“Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (25) ” on remote controller will display for about 30 mins.

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (27)

SUPER mode

  • SUPER mode is used to start or stop fast cooling or heating. In SUPER mode, the super indicator will display on LCD.
  • SUPER mode can be set when the appliance is in operation or energized.
  • In SUPER mode, you can set the temperature, airflow direction, or timer.

How to set SUPER mode?

Press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (28) the button for the cooling, dr,y, or fan-only mode.

Result: At high fan speed,  the set temperature automatically adjusts to 16℃(61°F).

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (29)

PressHashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (28)button on the heat mode.

Resuambienttdet temperature automatically adjusts to 30℃(86°F).
Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (29)How to cancel SUPER mode?
Press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (28) , MODE, FAN, ON/OFF, or SLEEP button.

Result: The display returns to the original mode. Escape from SUPER mode.

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (30)

Note:The 

  • SMART button is not available in SUPER mode.The
  • ECONOMY button is ineffective in SUPER mode.
  • The Appliance will continue working in SUPER mode, if you don’t escape from it by pressing any of the buttons mentioned above.
  • Heating is NOT available for cooling, only an air conditioner.
  • For the first generation of products, you can’t set temperature in super mode, but you can press TEMPERATURE SETTING button to escape from super mode.

Power control mode
When in Cooling mode, press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (31)button for about 5 seconds once to start Power control mode ( at low fan speed ), press this button for about 5 seconds once again to stop it.

When the appliance is in the Power control mode, press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (31) the button once by once

Result: The operation modes changed in sequence:

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (32)

  • Power control mode is ineffective in SUPER or ECONOMY mode.
  • Except for the button of Swing, Dimmer, Ifeel, Clock, Time on, Time off, Fan, pressing the other buttons can exit the Powercontrol mode, and the indicator “ % ” will disappear.
  • When start the Power control mode, the fan will automatically enter low wind speed, but you can change the wind speed by press the Fan button.

8℃HEAT mode (invalid for some models)

8℃HEAT mode is used to set 8℃heating mode.
In 8℃HEAT mode, the fan speed is set at “AUTO” automatically.

How to set 8℃HEAT mode?
Press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (9) andHashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (15) buttons together for about 2 seconds in the heating mode.

Result: The 8℃ heat mode will be started.

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (33)

Press any button except for Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (34)

Result: The displayHashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (35) will disappear, and the 8℃HEAT mode will be cancelled.

TIMER mode

It is convenient to set the timer on with TIMER ON buttons when you go out in the morning to achieve a comfortable room temperature at the time you get home. You can also set timer off at night to enjoy a good sleep.

How to set TIMER ON? 

  1. Press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (36) the button.
    Result: “ON 11 nooflash oonthe LCD. Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (37)
  2. Press :Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (9) or Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (11) button.
    Result: Once to increase or decrease the time setting by 1 minute. One and a half seconds to increase or decrease the time setting by 10 minutes, and a longer time to increase or decrease the time by 1 hour.Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (38)
  3. When your desired time is displayed on the LCD, press the TIMER ON button and confirm it.
    Result: A “beep” can be heard. “ON” stops flashing. The TIMER indicator on the indoor unit lights up.. . (invalid for some models) Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (39)
  4. After the set timer displayed for 5 seconds, the clock will be displayed on the LCD of the remote controller instead of set timer.

How to cancel TIMER ON?

Press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (36) the button again.
Result : A “beep” can be heard and the indicator disappears, the time on mode has been canceled.Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (39)Note: It is similar to setting TIMER OFF; you can make the appliance switch off automatically at your desired time.

QUIET mode (invalid for some models)
In this mode, the air conditioner will work with low noise performance.

Note: Press MODE.FAN.SMART.SUPER bcancels QUIET modeTTmode.

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (40)

ECONOMY mode (invalid for some models) 
In this mode, the air conditioner will bring you energy-saving performance by lowering running costs.

Note: The The The 

  • ECONOMY button is ineffective in SMART, SUR, and Power control modes.
  • Press the ON/OFF , MODE , TEMP △ ,  TEMP △ , FAN , SLEEP , QUIET, or ECONOMY button to cancel ECONOMY mode.
  • Press and hold “ QUIET ” button and “ ECONOMY ” button together for 3 seconds will alternate the mode between the cooling only and the cooling and heating.

IFEEL mode
The temperature sensor built into the controller is activated. It can sense its surrounding temperature,  and transmit the signal back to he unit, the unit can adjust the temperature to provide maximum comfort.

How to set IFEEL mode?

Press the Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (41) button once.

Result: The transmit signal in the display will appear, and the IFEEL function will be started.

Note:

  • Advice to puis t the remote controller in a place where the indoor unit receives the signal easily.
  • Advice to cancel the IFEEL mode to save energy when stopping the air conditioner.

How to cancel IFEEL mode
Press the Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (41) button once again.
The transmit signal in the display will disappear, and the IFEEL function will be shut off.

Dimmer button (invalid for some models)

How to set the DIMMER ?
Press the DIMMER button to turn off the light and the display in the unit.

Note:
When the light is off, the receiver signal will turn the light on again.

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (42)

LOCK mode

  • How to set LOCK ?
    Press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (36) and Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- 48 buttons together for 2 seconds to start LOCK mode. The lock indicator appears on the display.
  • How to cancel LOCK ?
    Press Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (36) and Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- 48 buttons together for 2 seconds to stop LOCK mode. The lock indicator disappears .

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (43)

SLEEP mode

SLEEP mode can be set in COOLING ,HEATING or DRYING mode. This function gives you a more comfortable environment for sleep.

  • The appliance will stop operating automatically after operating for 8 hours.
  • Fan speed is automatically set at low speed.

How to set SLEEP mode ?
Each timeHashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (44) the button is pressed.

Result: The operation mode is changed in sequence:

Hashoo-Electronics-L1-02-Series-Air-Conditioner-With-Remote-Control-fig- (45)

  1. SLEEP mode 1:
    Set temperature will rise by 2 C (20F) at most if the appliance operates in cooling mode for 2 hours constantly, then keeps steady.
    The set temperature will decrease by 2 °C (20F) at most if the appliance operates in heating mode for 2 hours constantly, then keeps steady.
  2. SLEEP mode 2:
    Set temperature will rise by 2 C (20F) if the appliance operates in cooling mode for 2 hours constantly, decrease by 1 OC(IOF) after 6 hours, then decrease by 1 OC(IOF) after 7 hours.
    Set temperature will decrease by 20 °C (20°F) if the appliance operates in heating mode for 2 hours constantly, rise by IC(IOF) after 6 hours, then rise by IC(IOF) after 7 hours.
  3. SLEEP mode 3:
    The set temperature will rise by IC(IOF) if the appliance operates in cooling mode for 1 hour rise by 2C(20F) after 2 hours, then decrease by 2C(20F) after 6 hours, then then and decrease by IC(IOF) after 7 hours.
    Set temperature will decrease by 20C(20F) if the appliance operates in heating mode for 1 hour , decrease by 2C(20F) after 2 hours, then rise by 2C(20F) after 6 hours, rise by 2C(20F) after 7 hours.
  4. SLEEP mode 4:
    The set temperature will remain.
  • Note: Press the SUPER SMART, MODE, or FAN button to cancel the SLEEP mode.
  • Note: Press the ECONOMY button for 5 seconds to exit the SLEEP mode and start the Power control mode.
  • Note: By pressing “Sleeping mode” four times, or selecting other modes like SUPER, SMART, OR FAN, you could cancel the sleeping function of those units without four sleeping curves.
  • Note: Heating is NOT availfor a cooling-only air conditioner.
  • Note: Some SLEEP modes are not available for some models.

FAQs

  • Q: How do I adjust the room temperature using the remote controller?
    A: Use the TEMP buttons on the remote controller to adjust the room temperature accordingly.
  • Q: Can I set a timer for the air conditioner to turn on or off?
    A: Yes, you can use the TIMER ON and TIMER OFF buttons on the remote controller to set timers for operation.
  • Q: What is the purpose of the SLEEP mode?
    A: The SLEEP mode is used to set or cancel Sleep Mode operation for improved comfort during sleep.

Documents / Resources

Hashoo Electronics L1-02 Series Air Conditioner With Remote Control [pdf] Instructions
L1-02, L1-12, L1-16-0, L1-02 Series Air Conditioner With Remote Control, L1-02 Series, Air Conditioner With Remote Control, Conditioner With Remote Control, Remote Control

References

Leave a comment

Your email address will not be published. Required fields are marked *