EPOT WM-08B Wireless Charging Mouse Pad
Product Information
Specifications
- Compliance: FCC Part 15
- Operation Conditions: Must not cause harmful interference, must accept any received interference
Welcome to use products of EPOT
Operation Method
Tile the mouse pad on the desk and connected to the changer with line (recommend connecting to changer with 5V-12V.But not recommend connecting to the USB of a computer, because of the low voltage), then you can put the mobile phone on the charging sign area to charge it. And you can use the mouse on the other side of the pad as usual. 
Function description
- A.LED indicator description
- LED indicator status definition:
- POWER ON: The blue and green light flashes 2 times. and then the blue light is long to enter the standby state.
- Charging: The charging state green LED is on.
- FOD Detection: the foreign object(1yuan coin)is placed in the placed in the center ,and the center ,and the green light flashes quickly until the foreign object is removed
Parameters Values
| Project | |
| wireless charging standard | QI |
| Input | 9V2N5V2A-3A |
| Output | 15W10W/7.5W/5W 5W output when input voltage is 5V |
| Charge efficiency | 70%-80% |
| Working distance | 3mm-5mm |
| Defensive function | Short circuit protection, Foreign object detection |
| Product compatibility | This product is only suitable for mobile phones with wireless charging function, or mobile phones with wireless charging receiver |
Temperature rise
The surface temperature rise of the shell shall not exceed 45C. The maximum temperature of each component of the power supply during normal operation shall comply with the usage specification of component derating.
Flammability of materials
The material used for the power supply housing shall minimize ignition hazard and ignition delay to V-1 or better. Printed boards and components shall be V-1 or better
Storage
Products should be stored in an indoor warehouse with a temperature of 25 degrees and humidity of no more than 75% to minimize the impact on products
Transportation
The products should be rainproof and waterproof during transportation to prevent them from being stacked in high temperature environment for a long time
Note: All packaging information, product features and specifications are subject to change at any time without further notice.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FAQ
- Q: What should I do if the device is causing interference?
- A: If you experience interference issues, try repositioning the device or adjusting its settings. Ensure that it is not operating in a way that may cause interference to other devices.
- Q: Can I modify the device for better performance?
- A: No, any modifications not approved by the responsible party for compliance may void your authority to operate the equipment. Stick to the original design and specifications.
Documents / Resources
 |
EPOT WM-08B Wireless Charging Mouse Pad [pdf] Instruction Manual 2BO34-WM-08B, 2BO34WM08B, WM-08B Wireless Charging Mouse Pad, WM-08B, Wireless Charging Mouse Pad, Charging Mouse Pad, Mouse Pad, Pad |