SMART IOT GATEWAY I CONNECTOR
SKU: STHC
Owner’s Manual
STHC i Connector Smart IoT Gateway
i Connector – SMART IOTA GATEWAY THC
THC is a Smart IoT Gateway, aka i Connector, a main component in any IoT application. i Connector has a role to connect the real World’s things like sensors, meters, ,machines…to server system for data logging, data analytics, monitoring & controls…i Connector support multiple Industrial Field bus like Modbus, Ethernet IP, Proficient, C Clink, Wireless sensor network…It connects to server system via LAN/WAN as Ethernet, WiFi or Cellular.
3-IN-1 DEVICE
i Connector is a 3-in 1 device, comprises Data logger + Logic Controller + Internet Gateway
NO NEED PROGRAMMING
Don’t need to learn any Programming language, just configure it remotely by Globalists platform
JUST 2-STEP FOR USING
Just install and configure it remotely on Globalists, then you can start use it!
MULTIPLE FIELD BUS PROTOCOLS
Support multiple Field bus protocols like Modbus, Ethernet IP, Proficient, Clink…
SINCE 2014!
Industrial customers have been using i Connectors since 2014 because of its quality!
i Connector – SMART IOTA GATEWAY
SPECIFICATION
| Host Communication Cellular type | LTE Cat 4, 3G-Dual band (2100/900) or LTE Cat M1/NB1 with Global band (B1, B2, B3, B4, B5, B8, B9, B10, B12, B13, B17, B18, B19, B20, B25, B26, B27, B28, B66 ) and 2G-Quad band fall back, standard internal antenna, optional external antenna |
| Host Communication Ethernet type | 01 x RJ45 port, Mbps |
| Host Communication WiFi type | 802.11b/g/n, 2.4Ghz,internal antenna |
| GPS | option, only available on GARS version or 3G-Pena band version |
| Host communication supports | TCP/IP, UDP/IP, FTP, HTTPD, SNIP… |
| Field bus communication | Modulus x 01 port, 31 slaves, max 19.2 kbps |
| Vietnam Type Approval Verification | QC 54:2011/BUTT, QC 15:2015/BUTT (DAVIT B00122019) |
| Optional | Integrated wireless co-coordinator with external antenna or internal antenna |
| Optional | Internal buzzer (to replace Relay 1) |
| Power supply | 7..48VDC, avg 200mA, peak 1.5A |
| Back-up battery | Lithium-ion for cellular versions |
| On-board memory & sensors | MB Flash, PCB temperature sensor |
| Electrical connectors | M12, 4-pin, coding A or 9mm Power Plug and USB port |
| SIM slot | 01 x micro-SIM (cellular versions only) |
| Included accessories | mounting bracket for wall mount |
| Operating Temperature/Humidity | -20 .. + 60 deg C / 95%RH, non-condensing |
| Housing/Protection | Aluminum+Poly carbonate. IP67 protection. |
| Dimension | H106xW73xD42 |
| Net weight | 190 grams |
| Relay outputs | 02 x relay SPST NO contact, 125VAC@0.3A or 24VDC@1A (depends on item code) |
i Connector 4G CAT WITH WIRELESS CO-COORDINATOR THC-MISGOVERN-WS433-CL-04
TYPICAL APPLICATION
CONNECT WIRELESS SENSORS TO GLOBIOTS Platform
PIN ASSIGNMENT & WIRING BUILT-IN WIRELESS CO-COORDINATOR
DIMENSION DRAWINGS OF STANDARD VERSION
(Unit: mm)
DIMENSION DRAWINGS BUILT-IN WIRELESS CO-COORDINATOR VERSION
(Unit: mm)
ORDERING INFORMATION
| ITEM CODE | DESCRIPTIONS |
| STHC-ISG02DB-NC | i Connector 3g Dual-Band, internal antenna, with 02 relays, no M12 cables |
| STHC-ISG02DB-WS433-CL-04 | i Connector 3g Dual-Band, internal GSM antenna, RS485/MODULUS with built-in wireless co-coordinator, external antenna 0 dbi with M12-Male connector |
| STHC-ISGWF-WS433-CL-04 | i Connector WIFI, internal WIFI antenna, RS485/MODULUS with built-in wireless co-coordinator, external antenna 0 dbi with M12-Male connector |
| STHC-SWEETISH-WS433-CL-04 | Smart Out-of-Box IoT Gateway, i Connector, Data logger + Controller + Gateway, WIFI 2.4ghz and Ethernet 10mbps, with Wireless Sub-GHz RF receiver |
| SIMMOBI-3G | Mobifone Data SIM CARD, only SMS receiving mode |
| SIMMOBI-10K-01Y | 12-month data plan for SIM CARD, unlimited data, GPRS/EDGE/UMTS/HSPA |
| **SPECIAL ORDER** | |
| STHC-ISG04A-WS433-CL-04 | i Connector 4G Cat 4, Asia bands, internal GSM antenna, RS485/MODULUS with built-in wireless coordinator, external antenna 0 dbi with M12-Male connector |
| STHC-ISGM1-NB1-2G-NC | i Connector CAT M1, NB1, 2G, Global bands, internal antenna, with 02 relays, no M12 cables |
| STHC-ISGM1-NB1-WS433-CL-04 | i Connector CAT M1, NB1, 2G, Global bands, internal antenna, with built-in wireless co-coordinator, external antenna 0 dbi with M12-Male connector and with M12-F to DC jack power cable |
| STHC-ISG02DB-WS433-CL-05 | i Connector 3G Dual Band*, internal GSM antenna, integrated wireless co-coordinator with Glasnost external antenna 0 dbi, 9mm DC Power Jack and USB port for configuration |
| STHC-ISG02DB-WS433-CL-06 | i Connector 3G Dual Band*, internal GSM antenna, integrated wireless co-coordinator with internal antenna , 9mm DC Power Plug and USB port for configuration, internal buzzer |
| STHC-ISG02-NC/GPS | i Connector 3G Penta Band with GPS, internal antennas, with 02 relays, no M12 cables |
| STHC-ISG02DB-NC/EXTANT | i Connector 3G Dual Band, SMA connector for external GSM antenna (order external antenna separately), no relay, no M12 cables |
| STHC-ISG02-NC/GPS/EXTANT | i Connector 3G Penta Band with GPS, SMA connectors for external GSM/GPS antennas (order external antennas separately), no relay, no M12 cables |
| STHC-ISG02-WS433-CL-04 | i Connector 3G Penta Band*, internal GSM antenna, RS485/Modulus with built-in wireless co-coordinator, external antenna 0 dbi with M12-Male connector |
| **ACCESSORIES** | |
| RS485-FM12-USB-1 | RS485/USB multi-purpose Configuration cable with connector m12 male, female and flying leads, with Power adapter 12VDC/2.0A |
| EXANT-JCG008 | IP67 GSM Antenna for Cellular i Connector with SMA connector, without GPS |
| EXANT-JCB008L | IP67 Combination GSM+GPS Antenna for Cellular i Connector with SMA connectors, with GPS |
| 2M-MM12CAB4x0.25 | M12 4pin Male assembly connector with Soldering terminals and coding A and Control Cable Cu/PVC/OS/PVC 4×0.25mm2, L=2m, Rohs, Shield 80% |
| 2M-FM12CAB4x0.25 | M12 4pin Female assembly connector with Soldering terminals and coding A and Control Cable Cu/PVC/OS/PVC 4×0.25mm2, L=2m, Rohs, Shield 80% |
| 5M-MM12CAB4x0.25 | M12 4pin Male assembly connector with Soldering terminals and coding A and Control Cable Cu/PVC/OS/PVC 4×0.25mm2, L=5m, Rohs, Shield 80% |
| 5M-FM12CAB4x0.25 | M12 4pin Female assembly connector with Soldering terminals and coding A and Control Cable Cu/PVC/OS/PVC 4×0.25mm2, L=5m, Rohs, Shield 80% |
| 10M-MM12CAB4x0.25 | M12 4pin Male assembly connector with Soldering terminals and coding A and Control Cable Cu/PVC/OS/PVC 4×0.25mm2, L=10m, Rohs, Shield 80% |
| 10M-FM12CAB4x0.25 | M12 4pin Female assembly connector with Soldering terminals and coding A and Control Cable Cu/PVC/OS/PVC 4×0.25mm2, L=10m, Rohs, Shield 80% |
| Notes | * Purchase M12-female cable to power and RS485 connecting for i Connector ** Purchase M12-male cable for using Relays port *** Purchase configuration cable RS485-FM12-USB-1 for off-line configuration of i Connector |
DAVITEQ TECHNOLOGIES INC
No.11 Street 2G, Nam Hung Vuong Res., An Lac Ward, Binh Tan Dist., Ho Chi Minh City, Vietnam
+84.28.6268.2523 / 6268.2524
info@daviteq.com
www.daviteq.com
OCT-2022
Doc No: STHC-DS-EN-13
Documents / Resources
 |
deviteq STHC iConnector Smart IoT Gateway [pdf] Owner's Manual STHC, iConnector Smart IoT Gateway, STHC iConnector Smart IoT Gateway, Smart IoT Gateway, IoT Gateway, Gateway |
