TS02 Bluetooth TPMS Sensor
“
Specifications:
- Product Name: Bluetooth TPMS Sensor TS02
- Size: 240mm
- Package Weight: Not specified
- Color: Black/Coffee-Colored Aluminum Valve Stem
Product Usage Instructions:
1. Exploded Diagram of TPMS Sensor Assembly:
Refer to the user manual for a detailed diagram of the TPMS
sensor assembly.
2. Packing List:
- Finished Product Packaging Box – 1
- Bluetooth Tire Pressure Sensor Unit – 1
- Black/Coffee-Colored Aluminum Valve Stem – 1
- Screw – 1
3. Operation Introduction:
- Remove the tire from the vehicle and secure it on a tire
changer. - Position the valve stem at the 1 o’clock position relative to
the tire changer’s mount/demount head. - Insert the tire lever and lift the tire bead over the mount
head to remove the bead. Maintain this position throughout the
demounting process. - Remove the sensor by loosening the retaining screw on the valve
stem, then loosen the retaining nut and remove the valve stem.
4. Pairing and Connection:
- Start the vehicle to initiate the automatic search for
installed Bluetooth Tire Pressure Monitoring Sensors (TPMS). - Automatic Connection: When the vehicle speed reaches 24 kph or
above and is maintained for 1-3 minutes, the in-vehicle system will
detect and synchronize the data from the sensors. - If connection fails, restart the vehicle or check the sensor
installation and battery level.
5. Note:
Before installing the sensor, carefully read all instructions
and precautions. It is recommended to have the installation
performed by a professional to ensure proper functioning of the
tire pressure sensor.
FAQ:
Q: What should I do if the connection fails during
pairing?
A: If the connection fails, try restarting the vehicle or
checking the sensor installation and battery level. Ensure that the
vehicle speed reaches the required threshold for automatic
connection.
Q: Can I install the sensor myself?
A: It is recommended to have the sensor installed by a
professional to avoid any issues with functionality. Follow all
provided instructions carefully.
“`
240mm
Bluetooth TPMS Sensor TS02 1. Exploded Diagram of TPMS Sensor Assembly
3. Packing List
Item
Finished Product Packaging Box
1
Bluetooth Tire Pressure Sensor Unit
1
Black/Coffee-Colored Aluminum Valve Stem 1
Screw
1
Quanty
2. Technical Specificaons
Baery Life Operang Temperature Storage Temperature Temperature Measurement Range Power supply Operang Humidity Operang Frequency Pressure Measurement Range Pressure Measurement Accuracy Temperature Measurement Accuracy Acceleraon Support Transmission Power Baery Capacity Ingress Protecon Rang Package Dimensions (L×W×H)
Package Weight
5 years+ -40°C to +105°C -40°C to +105°C -40°C to +105°C 3V 90% 2402-2480MHz 0800 kPa ±10 kPa ±3°C ±250 g 46 dBm 345 mAh IP67 73 × 30 × 45 mm 44.1 g
4.Operaon Introducon
Deflate the re Remove the valve cap and valve core, then fully deflate the re. Use an air-powered bead breaker to separate the outer re bead from the rim. Note: Ensure that the valve stem is posioned 180° opposite the bead breaker blade.
Remove the re Secure the re on the re changer. Posion the valve stem at the 1 o’clock posion relave to the re changer’s mount/demount head. Insert the re lever and li the re bead over the mount head to remove the bead.
Note: Maintain this starng posion throughout the demounng process.
1
2
Remove the sensor Use a screwdriver to loosen the retaining
screw on the valve stem to detach the sensor. Then loosen the retaining nut and remove the valve stem.
Install the re Place the re onto the rim, ensuring that the valve stem is posioned 180° opposite the mount head. Mount the re onto the rim following the re changer manufacturer’s instrucons.
Install the sensor and valve stem Step 1: Insert the valve stem through the valve hole from the inside of the rim. Step 2: Using a holding tool, ghten the nut to 4.0 N·m (Newton-meters) torque. Step 3: Adjust the installaon angle so the sensor sits flush against the rim, then ghten the retaining screw. Step 4: The sensor and valve stem are now installed.
Step1:
Step2:
Step3:
Step4:
5. Pairing and Connecon
1.Start the Vehicle Once the vehicle is started, it will automacally search for the installed Bluetooth Tire Pressure Monitoring Sensors (TPMS).
2.Automac Connecon When the vehicle speed reaches 24 kph or above and is maintained for 1-3 minutes, the in-vehicle system will automacally detect the sensors and synchronize the data. When the re pressure and temperature for all four wheels are displayed on the “Vehicle Status” or “Tire Informaon” screen, the connecon is successful. If the connecon fails, restart the vehicle or check the sensor installaon and baery level.
6.Note
Before installing the sensor, please read all instrucons and precauons carefully. It is recommended that the installaon be performed by a professional. Failure to follow the installaon instrucons may result in the re pressure sensor not funconing properly.
360mm
Website: www.cgsulit.com
E-mail: support@cgsulit.com
3
4
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Documents / Resources
 |
CGSULIT TS02 Bluetooth TPMS Sensor [pdf] Instruction Manual TS02, TS02 Bluetooth TPMS Sensor, Bluetooth TPMS Sensor, TPMS Sensor, Sensor |