Carrier SC-41-0200-0001-99 SmartCell Dual Output Device for Fire Zones
Technical specifications
General
- Wireless frequency 868 MHz
Input
- Input quantity 2
- Input type and rating Resistor monitored inputs
Output
- Output quantity 2
- Output type and rating: Voltage-free outputs, rated 1 A at 30 VDC
Physical
- Physical dimensions 150 x 200 x 55 mm (W x H x D)
- Net weight 0.45 kg
- Mounting type: Wall mount
- Batteries: 3 x ER14505M 3.6 V lithium thionyl chloride batteries (Fanso or Titus)
Environmental
- Operating temperature- -10 to +55°C
- Storage temperature -10 to +30°C (with batteries) -10 to +55°C (without batteries)
- Relative humidity 95% noncondensing max.
- Environment Indoor
Regulatory
- Compliancy CE
- Certification CPR
- Standards EN54-13
- EN54-18
- EN54-25
Overview
The SmartCell Input / Output Device is quick and easy to install and offers individual addressing at the SmartCell Control Panel. Features include two resistor-monitored inputs, two voltage-free outputs, and bidirectional 868 MHz communication. This device is third-party certified and compatible with the full.SmartCell product range.
Details
- Full wireless communication with the panel
- Quick and easy to install
- Two resistors monitored the inputs
- Twvoltage-free outputs
- For connection to remote fire devices
Installation
- Choose a suitable location for mounting the SmartCell Dual Input/Output Device on a wall.
- Ensure the area is within the specified temperature and humidity range for proper functioning.
- Mount the device, securing appropriate mounting hardware.
Connection
- Connect the resistor monitored inputs to the corresponding sensors or devices.
- Connect the voltage-free outputs to the desired remote fire devices for operation.
Battery Replacement
When replacing batteries, follow these steps:
- Remove the device from the wall mount carefully.
- Replace all three batteries with new ER14505M 3.6 V lithium thionyl chloride batteries.
- Ensure proper polarity while inserting the batteries.
- Remount the device securely on the wall.
As a company of innovation, Carrier Fire & Security reserves the right to change product specifications without notice. For the latest product specifications, visit firesecurityproducts.com online or contact your sales representative.
Last updated on 8 February 2024 – 12:15
FAQs
Q: Can the SmartCell Dual Input/Output Device be used outdoors?
A: No, the device is designed for indoor use only.
Q: What is the wireless communication frequency of the device?
A: The device operates at 868 MHz for wireless communication.
Q: How many inputs and outputs does the device have?
A: The device has two resistor-monitored inputs and two voltage-free outputs.
Documents / Resources
 |
Carrier SC-41-0200-0001-99 SmartCell Dual Output Device for Fire Zones [pdf] Owner's Manual SC-41-0200-0001-99 SmartCell Dual Output Device for Fire Zones, SC-41-0200-0001-99, SmartCell Dual Output Device for Fire Zones, Output Device for Fire Zones, Device for Fire Zones, Fire Zones |