Simple Key, Key Fob and Key Programmer with Interchangeable
Specifications
- STYLE: 4 Button Keypads
- BRAND: Car Keys Express
- CLOSURE TYPE: Button
- ITEM WEIGHT: 7.1 ounces
- PACKAGE DIMENSIONS: 7.68 x 4.8 x 2.52 inches
Introduction
It is a smartly invented car key solution. It Saves time and money by not having to travel to a key maker, locksmith, or expensive car dealership for a key fob replacement. Instead, get the key replacement kit. It comes with a simple key programmer and interchangeable 4 and 5 button pads on the key fob. It is complete with essential buttons. One key fob has all of the most crucial buttons for everyday use. It has the buttons lock, unlocks, and panic. A remote start button is available as an option, but it will only operate if your automobile was built with this feature. It is compatible with various vehicles. The remote start fob replacement kit is designed to fit a variety of car models from these manufacturers. Easy DIY Installation. Without the assistance of a professional car key programmer, connect our key fob programmer to your vehicle and install it in less than 10 minutes. To start the engine and install it, you’ll need your existing car key. It is a practical and user-friendly option. It is a cost-effective car key fob. It also saves your time and effort. For a single car, you can program up to 8 key fobs.
Ram
- 1500* 2009-2017
- 2500* 2009-2017
- 3500* 2009-2017
Volkswagen
- Routan 2009-2014
Jeep
- Commander 2008-2010
- Grand Cherokee* 2008-2013
Chrysler
- 300 2008-2010
- Town & Country* 2008-2016
Dodge
- Challenger* 2008-2014
- Charger* 2008-2010
- Dart 2013-2016
- Durango* 2011-2013
- Grand Caravan* 2008-2019
- Journey 2009-2010
- Magnum 2008
- Ram Trucks 2009-2017
How to activate the key
- Press the LOCK and PANIC buttons on the remote control at the same time. The light beneath the PANIC button will turn on and remain on.
- Using your ACTIVATION CODE, press the LOCK button to enter the first digit, the PANIC button to enter the second digit, and the UNLOCK button to enter the third digit.
- Now hit the LOCK and PANIC buttons on the remote control at the same time.
How to pair the key
- In the Compatibility list, look for your vehicle’s make, model, and year. Set the EZ Installer’s dial to the position indicated for the make, model, and year of your car. Enter the vehicle and double-check that all doors are shut.
- Start by putting the vehicle in PARK and turning off the engine. Turn on the hazard lights.
- Start the vehicle by inserting the original key into the ignition. Remove the security label from the EZ Installer and firmly put it into the under-dash onboard diagnostic (OBD) port.
- Listen for three fast beeps from the EZ Installer after waiting up to 8 seconds. Remove the key from the ignition and turn it off.
SPECIFICATIONS
| Style | 4 Button Keypads |
| Brand | Car Keys Express |
| Closure Type | Button |
| Item Weight | 7.1 ounces |
| Screen Type | Touch Screen |
Frequently Asked Questions
Is it possible to start my car without the fob?
Simply said, if you lose the keyfob that allows you to start your automobile with a push-button start before you try to drive, you will be unable to do so.
What are the functions of key fobs?
The little handheld remote control device that controls a remote keyless entry system is known as a key fob. You can praise the humble but mighty key fob when you push the button on your keys and hear the soothing chirp of your car’s unlocking mechanism.
Is it possible to use any key fob for any car?
As long as the key for the car is the same, you can reprogram a key fob to a different vehicle. If the key can go into and unlock the doors in this scenario, you’ll need to do the following: Remove the battery and replace it in the key fob (unless you put in a new battery)
Is it possible for me to replace a key fob on my own?
You might be able to program a replacement yourself, depending on the age and model of your car. Do-it-yourself key fob programming can take a variety of forms: In their owner’s manuals, certain automakers include instructions. In many circumstances, information can be found on the internet.
What if your key fob dies while you’re driving?
Nothing will happen if your key fob dies while you’re driving. Because the key fob is solely an unlocking and starting device, the automobile will continue to run. Once the automobile is moving, the key fob’s capacity to control the ignition or engine is nil.
Is it possible for me to program my own automobile key?
You can’t, for example, program your old car’s remote to your new car, even if they’re the same make and model. You will almost certainly be unable to programme a new key in a modern vehicle. You’ll need to go to a dealer or a locksmith.
The Simple Key Programmer is a car key solution that eliminates the need to visit a key maker, locksmith, or car dealership for a key fob replacement.
The Simple Key Programmer comes with a simple key programmer and interchangeable 4 and 5 button pads on the key fob, complete with essential buttons such as lock, unlock, and panic.
Yes, the Simple Key Programmer is compatible with various vehicles and is designed to fit a variety of car models from different manufacturers.
Yes, the Simple Key Programmer can program up to 8 key fobs for a single car.
The Simple Key Programmer can be installed in less than 10 minutes without the assistance of a professional car key programmer.
To activate the key, press the LOCK and PANIC buttons on the remote control at the same time. Then, using your ACTIVATION CODE, press the LOCK button to enter the first digit, the PANIC button to enter the second digit, and the UNLOCK button to enter the third digit. Finally, hit the LOCK and PANIC buttons on the remote control at the same time.
To pair the key, look for your vehicle’s make, model, and year in the Compatibility list. Set the EZ Installer’s dial to the position indicated for the make, model, and year of your car. Enter the vehicle and double-check that all doors are shut. Start by putting the vehicle in PARK and turning off the engine. Turn on the hazard lights. Start the vehicle by inserting the original key into the ignition. Remove the security label from the EZ Installer and firmly put it into the under-dash onboard diagnostic (OBD) port. Listen for three fast beeps from the EZ Installer after waiting up to 8 seconds. Remove the key from the ignition and turn it off.
