PR-KPYPDG2QFP Permanent
Fabric Paint Bottles
User Manual

Permanent Fabric Paint Tubes, Set of 24

INSTRUCTION

1. Clean the fabric and let it dry completely before applying the paint.
2. Place a barrier such as a smooth cardboard or waxed paper between layers of the fabric to prevent the paint from bleeding.
3. Apply the paint with a suitable paint brush on the fabric.
4. Allow the paint to dry completely. It takes 12 to 36 hours to dry depending on the thickness of the paint.
   a The paint is applicable for fabrics made from natural fibers, such as cotton and linen.
   b To heat set the paint, make sure the paint is completely dry. Iron the back of the painted fabric for 3 to 5 minutes.
   c To clean the painted fabric, always turn it inside out and wash in cold water. Avoid soaking and remove immediately from water after washing.

Documents / Resources

amazon basics PR-KPYPDG2QFP Permanent Fabric Paint Bottles [pdf] User Manual PR-KPYPDG2QFP, B0B7QCL3BN, PR-KPYPDG2QFP Permanent Fabric Paint Bottles, PR-KPYPDG2QFP, Permanent Fabric Paint Bottles, Fabric Paint Bottles, Paint Bottles, Bottles

References

• User Manual