Altronix Trove 1 Series Power Integration Enclosure

Specifications

• Enclosure Options:
  • TROVE1: Knockouts accommodate up to 1.5 conduit – Accommodates two (2) 12VDC/7AH batteries Dimensions: 18 H x 14.5 W x 4.625 D
  • TROVE2: Knockouts accommodate up to 2.0 conduit – Accommodates four (4) 12VDC/12AH batteries Dimensions: 27.25 H x 21.75 W x 6.5 D

Product Usage Instructions

Access and Power Integration

Altronix offers various models for power supply/charger combinations to integrate with access controllers.

Below are some compatible models:

• Trove 1 Series:
  • TROVE1LU1: Enclosure + Backplane for 8-Doors system
  • T1KE34, T1KE3F4: Pre-assembled Kits for 4-Doors Pro 1 system

• Trove 2 Series:
  • TROVE2LU2: Enclosure + Backplane for 16-Doors system
  • T2KE3316, T2KE33F16: Pre-assembled Kits for 16-Doors Pro 1 system

Power Supply/Chargers for TROVE Series

Altronix offers a range of power supply/chargers for the TROVE Series with different specifications including total output power, number of outputs, built-in battery charger, etc.

FAQ

Q: Can I request a 220VAC unit for the pre-assembled kits?

A: Yes, you can request a 220VAC unit by adding the suffix V to the model number (e.g., T1KE3F4V).

INSTRUCTION

• Easily combine Altronix power and accessories with access controllers from the industry’s leading manufacturers – Reducing installation and labor costs!
• Trove streamlines access control design and deployment, increasing profits and ROI.
• Removable backplanes allow you to configure and test before on-site installation.
• Trove enclosures are available in different sizes and configurations to meet your project scope – including wall mount, rack mount, and outdoor models.
• Pre-configured kits are available with power distribution, finger duct, and wire assemblies.
• Combine both access and intrusion module modules for various brands – all in one enclosure, for added value!
• Optional LINQ™ Networked Power Management
• Technology allows you to remotely monitor, control, and report power/diagnostics, streamlining service and maintenance operations by leveraging the network.
• Altronix products are TAA & NDAA-compliant
• Our free online Trove System Design tool simplifies the design and product selection process: www.altronix.com/system_design_tools/trove

Enclosure Options

TROVE1

• Knockouts accommodate up to 1.5” conduit
• Accommodates two (2) 12VDC/7AH batteries
• Dimensions: 18” H x 14.5” W x 4.625” D

TROVE2

• Knockouts accommodate up to 2.0” conduit
• Accommodates four (4) 12VDC/12AH batteries
• Dimensions: 27.25” H x 21.75” W x 6.5” D

Access and Power Integration

Altronix Model	Power Supply/Charger(s)	Description/Sub-Assemblies	System Capacity	Compatible KISI Models
Trove 1 Series- Accommodates Altronix Power and Distribution with Controllers
TROVE1LU1	N/A	Enclosure + Backplane	8-Doors	Pro 1
TLU1	N/A	Backplane only
Trove 1 Series Pre-assembled Kits
T1KE34	AL600ULXB	ACM4	4-Doors	Pro 1
T1KE3F4	eFlow6NB
T1KE34D	AL600ULXB	ACM4CB
T1KE3F4D	eFlow6NB
T1KE38	AL600ULXB	2-ACM4	8-Doors
T1KE3F8	eFlow6NB
T1KE38D	AL600ULXB	2-ACM4CB
T1KE3F8D	eFlow6NB
220VAC units available upon request, add suffix “V” (T1KE3F4V)

T1KE34 4-Door Access System with Power

Altronix Model	Power Supply/Charger(s)	Description/Sub-Assemblies	System Capacity	Compatible KISI Models
Trove 2 Series- Accommodates Altronix Power and Distribution with Controllers
TROVE2LU2	N/A	Enclosure + Backplane	16-Doors	Pro 1
TLU2	N/A	Backplane only
Trove 2 Series Pre-assembled Kits
T2KE3316	2-AL600ULXB	2-ACM8	16-Doors	Pro 1
T2KE33F16	2-eFlow6NB
T2KE3316D	2-AL600ULXB	2-ACM8CB
T2KE33F16D	2-eFlow6NB

220VAC units available upon request, add suffix “V” (T2KE3316V)

T2KE3316 16-Door Access System with Power

Power Supply Chargers for TROVE Series

Altronix Model	Total Output Power	Number of Outputs	Built-in Battery Charger	Input	Dimensions (L x W x H)
ULXB Series Power Supply/Chargers
AL400ULXB2	12VDC @ 4A or 24VDC @ 3A	1	SLA	115VAC	7.1” x 4.5” x 1.44”
AL600ULXB	12VDC or 24VDC @ 6A				7.1” x 4.5” x 2.6”
AL1012ULXB	12VDC @ 10A				7.5” x 4.5” x 2.25”
AL1024ULXB2	24VDC @ 10A				8.4” x 4.5” x 1.95”
AL400ULXB2V	12VDC @ 4A or 24VDC @ 3A			220VAC	7.1” x 4.5” x 1.44”
AL600ULXB220	12VDC or 24VDC @ 6A				7.1” x 4.5” x 2.6”
AL1012ULXB220	12VDC @ 10A				7.5” x 4.5” x 2.25”
AL1024ULXB2V	24VDC @ 10A				8.4” x 4.5” x 1.95”
eFlow Series Power Supply/Chargers
eFlow4NB	12VDC or 24VDC @ 4A	1 Main Output, 1Aux. Output (1A)	SLA	115VAC	7.5” x 4.6” x 1.75”
eFlow6NB	12VDC or 24VDC @ 6A				7.5” x 4.6” x 1.75”
eFlow102NB	12VDC @ 10A				7.5” x 4.6” x 1.75”
eFlow104NB	24VDC @ 10A				8.25” x 4.56” x 1.75”
eFlow4NBV	12VDC or 24VDC @ 4A			220VC	7.5” x 4.6” x 1.75”
eFlow6NBV	12VDC or 24VDC @ 6A				7.5” x 4.6” x 1.75”
eFlow102NBV	12VDC @ 10A				7.5” x 4.6” x 1.75”
eFlow104NBV	24VDC @ 10A				8.25” x 4.56” x 1.75”
Tango PoE Driven Power Supply/Charger
Tango1B	12VDC up to 6.25A (75W) and 24VDC up to 3A (75W)	2	LiFePO4	90W 802.3bt PoE	7.625” x 4.125” x 1.25”

PoE Power Sourcing Equipment
Altronix Model	Description
NetWay1BT	Single Port 802.3bt Converter/Injector – 115/230VAC Input, 90W Output
NetWay8BT	8-Port Managed 802.3bt Midspan Injector supplies 90W per port (480W total power)

Power Distribution Sub Assemblies for TROVE Series

Altronix Model	Description	Number of Outputs	Dimensions
ACM4 / ACM4CB	4-Output Access Power Controller	4	5.175” x 3.36” x 1.25”
ACM8 / ACM8CB	8-Output Access Power Controller	8	8” x 4.5” 1.25”
ACMS8 / ACMS8CB	Dual Input, 8-Output Access Power Controller	8	8” x 4.5” 1.25”
ACMS8K1 / ACMS8CBK1	Dual Input, 8-Output Access Power Controller, and Voltage Regulator Kit	8	8” x 4.5” 2.125”
ACMS12 / ACMS12CB	Dual Input, 12-Output Access Power Controller	12	8” x 4.5” 1.25”
LINQ8PD / LINQ8PDCB	Dual Input, 8-Output Network Power Distribution Module – Control, Monitor and report Power/Diagnostics	8	5.5” x 3.625” x 1.25”
LINQ8ACM / LINQ8ACMCB	Dual Input, 8-Output Network Power Access Power Controller – Control, Monitor and report Power/Diagnostics	8	8”x 4.5”x 1.25”
LPD	Low Power Disconnect Module (12/24VDC input)	N/A	2” x 2.75” 1”
M0M5	5-Output Power Distribution Module with Fire Alarm Interface	5	5.25” x 3.5” x 1”
NETWAY5A	5-Port Switch Board Facilitates Network Drops (10/100)	5	5.625” x 3.5” x 1”
NETWAY5B	5-Port Switch Board Facilitates Network Drops (10/100/100)	5	5.625” x 3.5” x 1”
NETWAY5P	5-Port Hardened PoE+ Switch Board	5	5.6” x 3.6” x 0.75”
NETWAY5PQ	5-Port Hardened Managed PoE+ SwitchBoard	5	5.6” x 3.6” x 0.75”
PD4UL / PD4ULCB	4-Output Power Distribution Module	4	5.21” x 3.25” x 1”
PD8UL / PD8ULCB	8-Output Power Distribution Module	8	5.21” x 3.25” x 1”
PDS8 / PDS8CB	Dual Input, 8-Output Power Distribution Module	8	5.375” x 3” x 1”
PDS8K1 / PDS8CBK1	Dual Input, 8-output Power Distribution Module, and Voltage Regulator Kit	8	5.375” x 3” x 2”
PD16W / PD16WCB	16-Output Power Distribution Module	16	5.875” x 6” x 0.95”
PDS16 / PDS16CB	Dual Input, 16-Output Power Distribution Module	16	5.375” x 3” x 1”
VR6	Stackable Voltage Regulator Converts a 24VDC input to 5VDC or 12VDC at 6A	1	5.375” x 3” x 1”
VR10	Stackable Voltage Regulator Converts a 24VDC input to 5VDC or 12VDC at 10A	1	5.375” x 3” x 1”

Stackable sub-assemblies save valuable enclosure space, allowing for more power distribution and access controllers.

Optional Accessories for TROVE Series

• 140 58th Street
• Brooklyn, NY 11220
• 718.567.8181
• info@altronix.com

Documents / Resources

Altronix Trove 1 Series Power Integration Enclosure [pdf] Instruction Manual Trove 1 Series, Trove 1 Series Power Integration Enclosure, Power Integration Enclosure, Integration Enclosure, Enclosure

References

• User Manual