AKO CAMMTool Application for Remote Device Control and Configuration User Guide
Description
CAMM Tool and CAMM Fit applications can be used to control, update and configure the AKO Core and AKO Gas series devices which have the CAMM (AKO-58500) module installed, as well as to configure and update the actual CAMM module. The first application is designed to help installers in the start-up and maintenance of the devices, while the other allows users to monitor their installations.
The functions of each application are featured in the following table:
| General insight into the device status | |||
| Remote control of the device and keyboard | |||
| Display inputs and outputs | |||
| Display and change the Set Point | |||
| Display the active alarms | |||
| Share a connection to receive teleservice (Slave) | |||
| Initiate remote connection to offer teleservice (Master) | |||
| Display device activity | |||
| Save and transfer complete configurations | |||
| Display and modify operation parameters | |||
| Create offline configurations | |||
| Consult device manuals (online) | |||
| Display continuous logging charts | |||
| Display the events log | |||
| Display the operation trends | |||
| Display configuration changes | |||
| Configure CAMM module parameters | |||
| Update CAMM module firmware | |||
| Update device firmware | |||
| Export device data to Excel (continuous logging, events and audit logs) | * | ||
| Export CAMM module data to Excel (events and audit logs) |
Links to applications
*Only events and audit logs can be exported
Access and authentication
List of active devices detected (Bluetooth search)
Options
Show the available devices
Android only:
Activate the Pairing int. function which allows the user to perform pairing with the device without quitting the App
General device view
Status of inputs and outputs
List of saved configurations
Parameter configuration
Operation summary
Events log
Continuous logging charts (Probes)
Operation trends
Logging of configuration changes
CAMM module information
Export to a .csv file
*It is necessary to delete the Bluetooth connection and create a new connection
Teleservice
Enables the remote control and configuration of any device with the CAMM module installed.
Slave (must be together with the device): Choose the “Share” option and notify the remote operator. This device will function as a transmitter, control over the device is passed to the Master device.
Master (remote operator):
Choose the “Connect to a remote device” option and enter the user (e-mail) used on the slave phone. This device will remotely control the device.
Upon establishing connection, the master device will have control over the remote device. On the master device, the upper part of the screen changes colour to red indicating that it is connected to a remote device. Controlling the remote device requires fast Internet connection and good coverage, otherwise you may experience delays and the connection may be lost
Documents / Resources
 |
AKO CAMMTool Application for Remote Device Control and Configuration [pdf] User Guide CAMMTool, CAMMFit, CAMMTool Application for Remote Device Control and Configuration, Application for Remote Device Control and Configuration, CAMMTool Application, Application |
