ATMSGZ01 ACDC App For Wireless Zigbee Gateway
Connect your phone to local Wi-Fi first. Use your phone to scan the QR code below. Download and install the App.
3.Connect Gateway Device to Power and Wi-Fi Network
Connect the device to the mains supply(100-250VAC) for connection diagram see section No.4. Press and hold the button for about 5. seconds until the Green LED light blinks fast.
6.Connect A New Device To The Zigbee Gateway Device
Initialize Pairing Mode On The Zigbee Device to be Added, Refer to Specific Device Manual
Documents / Resources
 |
ACDC ATMSGZ01 ACDC App For Wireless Zigbee Gateway [pdf] Instruction Manual ATMSGZ01, ATMSGZ01 ACDC App For Wireless Zigbee Gateway, ACDC App For Wireless Zigbee Gateway, App For Wireless Zigbee Gateway, Wireless Zigbee Gateway, Zigbee Gateway, Gateway |