LANCOM 1900EF-5G
Quick Reference Guide
1900EF-5G Multi-WAN VPN-Gateway
- 5G antenna connectors
Connect the supplied cellular antennas to the connectors MAIN / AUX or MIMO1 / MIMO2 at the front of the device.
- WAN 1 interfaces (SFP / TP combo port)
Insert a suitable SFP module (e.g. 1000Base-SX or 1000Base-LX) into the SFP port. Choose a cable compatible with the SFP module and connect it as described in the module’s documentation. SFP module and cables are not included.
If desired, alternatively connect the WAN 1 TP interface to a WAN modem using the provided Ethernet cable with green connectors. 
- WAN 2 interface (TP)
Connect the WAN 2 interface to a WAN modem using the provided Ethernet cable with green connectors. 
- Ethernet interface
Use the cable with the kiwi-colored connectors to connect one of the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.
- SIM card slot
Slide the SIM card into the SIM card slot using the marker to ensure that the card is the right way round. Ensure that the SIM card clicks into place on insertion. To remove the card from the device, press the card lightly into the device. Let’s go to release the SIM card from the slot.
- Configuration interface
Use the included serial configuration cable to connect the serial interface (COM) to the serial interface of the device you want to use for configuring / monitoring.
- USB interface
You can use the USB interface to connect a USB printer or a USB storage device.
- Power connector and grounding point (device back side)
Supply power to the device via the power connector. Please use the IEC power cable supplied (separately available for WW devices).
- ATTENTION: High touch current possible! Connect to earth before connecting the power supply.
Please observe the following when setting up the device
- The main plug of the device must be freely accessible.
- For devices to be operated on the desktop, please attach the adhesive rubber footpads.
- Do not rest any objects on top of the device and do not stack multiple devices.
- Keep the ventilation slots on the side of the device clear of obstruction.
- Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.
Pay attention to the “R” and “L” marks on the brackets for accurate mounting.
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
MOUNTING AND CONNECTING THE DEVICE
| a 5G / VPN / POWER | |
| 5G | |
| Off | Cellular interface disabled |
| Green, permanently | Connection to cellular network active |
| Green, flickering | Cellular data transmission |
| Orange, permanently | Login to cellular network successful |
| Orange, blinking | Logging on to the cellular network |
| Red, permanently | Hardware error/module unavailable |
| Red / green, blinking | SIM card error (PIN) |
| Red/orange, blinking | Uploading module firmware |
| VPN | |
| Off | VPN connection inactive |
| Green, permanently | VPN connection active |
| Green, flashing | VPN connecting |
| POWER | |
| Off | Device switched off |
| Green, permanently* | Device operational, resp. the device is paired/claimed and LANCOM Management Cloud (LMC) is accessible |
| Green / red, blinking | No password set. Without a password, the configuration data in the device is unprotected. |
| Red, blinking | Charge or time limit reached |
| 1x green inverse blinking* | Connection to the LMC active, pairing OK, device not claimed |
| 2x green inverse blinking* | Pairing error, resp. LMC activation code not available |
| 3x green inverse blinking* | LMC not accessible, resp. communication error |
| b RESET | |
| Reset button | short press > Restart the device long press > Reset the device |
| c WAN 1 / WAN 2 | |
| Green, orange off | No networking device connected |
| Green, permanently | Connection to network device operational, no data traffic |
| Green, flickering | Data transmission |
| Orange off | 1000 Mbps |
| Orange, permanently | 10 / 100 Mbps |
| d ETH 1 – ETH 4 | |
| Green, orange off | No networking device connected |
| Green, permanently | Connection to network device operational, no data traffic |
| Green, flickering | Data transmission |
| Orange off | 1000 Mbps |
| Orange, permanently | 10 / 100 Mbps |
TECHNICAL DETAILS
| Hardware | |
| Power supply | Internal power supply unit (100–240 V, 50-60 Hz) |
| Power consumption | Max. 27 W |
| Environment | Temperature range 0–40 °C, humidity 0–95 %; non-condensing |
| Housing | Robust metal housing, 1 HU with mounting brackets for 19“ installation, 345 x 44 x 253 mm (W x H x D) |
| Number of fans | 1 quiet fan |
| Interfaces | |
| WAN 1 / WAN 2 | WAN 1 SFP: Compatible with optional LANCOM SFP modules. Set as a WAN port ex-factory, can be configured as a LAN port. WAN 1 / WAN 2 TP: 10 / 100 / 1000 Base-TX, autosensing full duplex (WAN 1) / autosensing (WAN 2), auto node hub |
| ETH1 – ETH 4 | 4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode. Up to 3 ports can be operated as additional WAN ports. Ethernet ports can be electrically disabled in the LCOS configuration. |
| Config (Com) / V.24 | Serial configuration interface / COM-port: 9,600 – 115,200 baud |
| USB | USB 2.0 hi-speed host port for connecting USB printers (USB print server), serial devices (COM- port server) or USB drives (FAT file system) |
| 5G | Four SMA connectors for the supplied dipole rod antennas, compatible LANCOM AirLancer antennas for 5G, 4G, or from other manufacturers. Please respect the restrictions which apply in your country when setting up an antenna system (particularly antenna gain/transmission power). |
| WAN protocols | |
| Ethernet | PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1, RIP- 2, VLAN, GRE, EoGRE, L2TPv2 (LAC or LNS), IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack session), IP(v6)or (autoconfiguration, DHCPv6 or static) |
| Data transmission in cellular networks – supported standards and power (dBm) | |
| LTE / LTE Advanced | Band 1: 24.0; band 3: 24.8; band 7: 24.8; band 8: 24.0; band 20: 24.0; band 34: 24.0; band 38: 24.8; band 40: 24.8; band 42: 24.8 |
| 5G NR | n1: 24.0; n3: 24.0; n28: 24.0; n41: 24.0; n77: 24.5; n78: 24.5 |
| Declaration of Conformity | |
| Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/53/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc | |
| Package content | |
| Documentation | Quick Reference Guide (DE/EN), Installation Guide (DE/EN) |
| Cables | 1 Ethernet cable, 3 m (kiwi colored connectors); 1 Ethernet cable, 3 m (green connectors); 1 IEC power cord 230 V (not for WW devices) |
| Antennas | Four 5G/4G antennas for 5G/LTE |
| Mounting brackets | Two 19” brackets for rack mounting |
*) The additional power LED statuses are displayed in a 5-second rotation if the device is configured to be managed by the LANCOM Management Cloud.
LANCOM, LANCOM Systems, LCOS, LAN community, and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and/or omissions. 111994/12/21
Documents / Resources
 |
LANCOM 1900EF-5G Multi-WAN VPN-Gateway [pdf] User Guide 1900EF-5G, Multi-WAN VPN-Gateway, 1900EF-5G Multi-WAN VPN-Gateway |
