LANCOM SYSTEM 1800EF High Availability Networking Via 5G
Specifications
- Product: LANCOM 1800EF
- Interfaces: Ethernet, WAN, SFP, USB, Serial, USB-C
- Power Supply: Supplied power adapter
- Additional: LED indicators for status monitoring
Mounting & Connecting:
Ethernet Interfaces: Use the cable with kiwi-colored connectors to connect ETH 1 to ETH 4 to your PC or LAN switch.
WAN Interface: Use the cable with green connectors to connect the WAN interface to your WAN modem.
SFP Interface: Insert a suitable LANCOM SFP module (e.g, 1000Base-SX or 1000Base-LX) into the SFP port. Choose a cable compatible with the SFP module and connect it as described in the SFP module’s mounting instructions. www.lancom-systems.com/SFP-module-MIThe The SFP module and cable are not included.
USB Interface: Connect a USB data medium or printer to the USB interface using a suitable cable (not supplied).
Serial USB-C Configuration Interface: Use a USB-C cable for optional device configuration on the serial console (cable not included).
Power Supply
Use only the supplied power adapter. Ensure a professionally installed power supply at a nearby accessible power socket. The power plug must remain freely accessible at all times.
- Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
- Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
- The power plug of the device must be freely accessible.
- Please note that support for third-party accessories is not provided.
Please observe the following when setting up the device
- When setting up on the table, use the enclosed self-adhesive rubber pads, if applicable.
- Do not rest any objects on top of the device, and do not stack multiple devices.
- Keep all ventilation slots of the device clear of obstruction.
- Rack installation with the optional LANCOM Rack Mount / Rack Mount Plus (separately available)
Setting Up
- Use self-adhesive rubber pads when setting up on a table.
- Do not stack multiple devices or place objects on top of the device.
- Keep all ventilation slots clear of obstructions.
Rack Installation
- Rack installation is possible with the optional LANCOM Rack
- Mount/Rack Mount Plus (sold separately).
LED Description & Technical Details:
Power Off: Green (permanently), Red/Green (blinking), Red (blinking slowly)
Online: Green (blinking), Green (permanently), Red (permanently)
SFP: Off, Red (permanently), Green (permanently), Green (blinking), Red (blinking)
- The additional power LED statuses are displayed in a 5-second rotation if the device is configured to be managed by the LANCOM Management Cloud.
- This product contains separate open-source software components which are subject to their own licenses, in particular the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the corresponding software components will be made available on a download server upon request.
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Werselen declares that this device complies with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc
LANCOM, LANCOM Systems, LCOS, LANcommunity, and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and/or omissions. 0624
Frequently Asked Questions
Q: Can I use third-party accessories with LANCOM 1800EF?
A: No, support for third-party accessories is not provided. It is recommended to use only compatible LANCOM accessories.
Q: What should I do if the LED indicators show a hardware error?
A: If the LED indicators display a hardware error, refer to the user manual for troubleshooting steps. If the issue persists, contact LANCOM Systems customer support for assistance.
Documents / Resources
 |
LANCOM SYSTEM 1800EF High Availability Networking Via 5G [pdf] User Guide 62125, 0624, 1800EF High Availability Networking Via 5G, 1800EF, High Availability Networking Via 5G, Availability Networking Via 5G, Networking Via 5G |